From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from asavdk3.altibox.net ([109.247.116.14]) by bombadil.infradead.org with esmtps (Exim 4.89 #1 (Red Hat Linux)) id 1eUIdH-00024k-3Q for barebox@lists.infradead.org; Wed, 27 Dec 2017 20:49:06 +0000 Date: Wed, 27 Dec 2017 21:48:42 +0100 From: Sam Ravnborg Message-ID: <20171227204842.GA20040@ravnborg.org> MIME-Version: 1.0 Content-Disposition: inline List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: [PATCH v3 0/24] at91: move reset vector to board code To: Barebox List Cc: Sam Ravnborg The following patchset moves the reset vector for at91 boards from mach-at91 to board code. This is similar to what other boards do and is done to prepare for multi-image and DT support. The patchset convert all boards and thus clean up the old code that resided in mach-at91/ The first patch have minimal impact, but prepares for a board-by-board conversion. All temporary CONFIG symbols are gone at the end of this series. I kept Jean-Christophe PLAGNIOL-VILLARD and others copyright in all the created files and did not add copyright myself. The patchset does IMO not add any copyrightable material from my side as this is in reality just moving around code. With this patchset applied we no longer have any places where we call board code from mach-at91/ thus allowing us to introduce multi-images. And we are also on the right track to introduce DT support for additional AT91 based boards. The patchset was successfully booted on a AT91SAM9263EK, and all defconfigs was built (expect the ones that failed to build before this patchset was applied). I consider the patchset ready for barebox-next. Changes v2 => v3 v2 was posted in July - but I have lacked spare time until now to give it a proper respin - respin of all patches on top of v2017.12.0 - fix bogus handling of at91sam926x_board_init - Introduce new CONFIG symbol for at91sam926x_board_init to allow bisects Changes v1 => v2 - converted all boards over - fixed author info Sam Ravnborg (24): arm: at91: refactor lowlevel_init selection arm: at91: drop unused at91sam9x5_lowlevel_init.c arm: at91: add at91sam926x_board_init.h at91sam9263ek: move reset vector to board code at91sam9261ek, at91sam9g10ek: move reset vector to board code pm9261: move reset vector to board code at91: drop unused at91sam9261_lowlevel_init pm9263: move reset vector to board code usb-a926x: move reset vector to board code mmccpu: delete unused lowlevel_init mmccpu: move reset vector to board code tny-a926x: delete unused tny_a9263_lowlevel_init.c tny-a926x: move reset vector to board code qil-a926x: move reset vector to board code haba-knx: move reset vector to board code sama5d{3,4}{xek,xplained}: move reset vector to board code at91sam9n12ek: move reset vector to board code at91sam9260ek, at91sam9g20ek: move reset vector to board code at91sam9m10g45ek, at91sam9m10ihd, pm9g45: move reset vector to board code animeo: move reset vector to board code telit-evk-pro3: move reset vector to board code dss11: move reset vector to board code at91rm9200ek: move reset vector to board code arm: at91: remove leftovers from moving reset code in mach-at91 # git diff --stat=200 -M -C arch/arm/boards/animeo_ip/Makefile | 3 +++ arch/arm/{mach-at91/sama5d3_lowlevel_init.c => boards/animeo_ip/lowlevel.c} | 17 +++++++------ arch/arm/boards/at91rm9200ek/Makefile | 3 +++ arch/arm/{mach-at91/at91rm9200_lowlevel_init.c => boards/at91rm9200ek/lowlevel.c} | 14 +++++------ arch/arm/boards/at91sam9260ek/Makefile | 3 +++ arch/arm/{mach-at91/sama5d3_lowlevel_init.c => boards/at91sam9260ek/lowlevel.c} | 17 +++++++------ arch/arm/boards/at91sam9261ek/Makefile | 2 +- arch/arm/boards/at91sam9261ek/lowlevel_init.c | 41 ++++++++++++++++++++++--------- arch/arm/boards/at91sam9263ek/Makefile | 2 +- arch/arm/boards/at91sam9263ek/lowlevel_init.c | 43 ++++++++++++++++++++++++--------- arch/arm/boards/at91sam9m10g45ek/Makefile | 3 +++ arch/arm/{mach-at91/at91sam9g45_lowlevel_init.c => boards/at91sam9m10g45ek/lowlevel.c} | 11 +++------ arch/arm/boards/at91sam9m10ihd/Makefile | 2 ++ arch/arm/{mach-at91/at91sam9x5_lowlevel_init.c => boards/at91sam9m10ihd/lowlevel.c} | 19 +++++++-------- arch/arm/boards/at91sam9n12ek/Makefile | 3 +++ arch/arm/{mach-at91/at91sam9n12_lowlevel_init.c => boards/at91sam9n12ek/lowlevel.c} | 13 ++++------ arch/arm/boards/dss11/Makefile | 2 ++ arch/arm/{mach-at91/sama5d3_lowlevel_init.c => boards/dss11/lowlevel.c} | 17 +++++++------ arch/arm/boards/haba-knx/Makefile | 3 +++ arch/arm/{mach-at91/sama5d3_lowlevel_init.c => boards/haba-knx/lowlevel.c} | 17 +++++++------ arch/arm/boards/mmccpu/Makefile | 2 +- arch/arm/{mach-at91/at91sam9n12_lowlevel_init.c => boards/mmccpu/lowlevel.c} | 19 +++++++-------- arch/arm/boards/mmccpu/lowlevel_init.c | 135 ------------------------------------------------------------------------------------------------------ arch/arm/boards/pm9261/Makefile | 2 +- arch/arm/boards/pm9261/lowlevel_init.c | 39 ++++++++++++++++++++++-------- arch/arm/boards/pm9263/Makefile | 2 +- arch/arm/boards/pm9263/lowlevel_init.c | 43 ++++++++++++++++++++++++--------- arch/arm/boards/pm9g45/Makefile | 3 +++ arch/arm/{mach-at91/at91sam9g45_lowlevel_init.c => boards/pm9g45/lowlevel.c} | 13 ++++------ arch/arm/boards/qil-a926x/Makefile | 3 +++ arch/arm/{mach-at91/sama5d3_lowlevel_init.c => boards/qil-a926x/lowlevel.c} | 17 +++++++------ arch/arm/boards/sama5d3_xplained/Makefile | 1 + arch/arm/{mach-at91/sama5d3_lowlevel_init.c => boards/sama5d3_xplained/lowlevel.c} | 10 +++----- arch/arm/boards/sama5d3xek/Makefile | 1 + arch/arm/{mach-at91/sama5d3_lowlevel_init.c => boards/sama5d3xek/lowlevel.c} | 10 +++----- arch/arm/boards/sama5d4_xplained/Makefile | 1 + arch/arm/{mach-at91/sama5d3_lowlevel_init.c => boards/sama5d4_xplained/lowlevel.c} | 10 +++----- arch/arm/boards/sama5d4ek/Makefile | 1 + arch/arm/{mach-at91/sama5d3_lowlevel_init.c => boards/sama5d4ek/lowlevel.c} | 10 +++----- arch/arm/boards/telit-evk-pro3/Makefile | 2 ++ arch/arm/{mach-at91/sama5d3_lowlevel_init.c => boards/telit-evk-pro3/lowlevel.c} | 17 +++++++------ arch/arm/boards/tny-a926x/Makefile | 8 +++--- arch/arm/{mach-at91/sama5d3_lowlevel_init.c => boards/tny-a926x/tny_a9260_lowlevel.c} | 17 +++++++------ arch/arm/{mach-at91/at91sam9n12_lowlevel_init.c => boards/tny-a926x/tny_a9263_lowlevel.c} | 19 +++++++-------- arch/arm/boards/tny-a926x/tny_a9263_lowlevel_init.c | 107 --------------------------------------------------------------------------------- arch/arm/boards/usb-a926x/Makefile | 8 +++--- arch/arm/{mach-at91/sama5d3_lowlevel_init.c => boards/usb-a926x/usb_a9260_lowlevel.c} | 17 +++++++------ arch/arm/boards/usb-a926x/{usb_a9263_lowlevel_init.c => usb_a9263_lowlevel.c} | 43 ++++++++++++++++++++++++--------- arch/arm/mach-at91/Kconfig | 31 ++++++++++++++---------- arch/arm/mach-at91/Makefile | 14 +---------- arch/arm/mach-at91/at91sam9260_lowlevel_init.c | 48 ------------------------------------ arch/arm/mach-at91/at91sam9261_lowlevel_init.c | 48 ------------------------------------ arch/arm/mach-at91/at91sam9263_lowlevel_init.c | 48 ------------------------------------ arch/arm/mach-at91/include/mach/at91_lowlevel_init.h | 46 ----------------------------------- arch/arm/mach-at91/{at91sam926x_lowlevel_init.c => include/mach/at91sam926x_board_init.h} | 82 +++++++++++++++++++++++++++++++++++++++++++------------------- 55 files changed, 413 insertions(+), 699 deletions(-) _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox