From: Sam Ravnborg <sam@ravnborg.org>
To: Barebox List <barebox@lists.infradead.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Subject: [PATCH 14/24] qil-a926x: move reset vector to board code
Date: Wed, 27 Dec 2017 21:50:23 +0100 [thread overview]
Message-ID: <20171227205033.26012-14-sam@ravnborg.org> (raw)
In-Reply-To: <20171227204842.GA20040@ravnborg.org>
Create new file lowlevel.c that contains the reset vector.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
---
arch/arm/boards/qil-a926x/Makefile | 3 +++
arch/arm/boards/qil-a926x/lowlevel.c | 26 ++++++++++++++++++++++++++
arch/arm/mach-at91/Kconfig | 2 --
3 files changed, 29 insertions(+), 2 deletions(-)
create mode 100644 arch/arm/boards/qil-a926x/lowlevel.c
diff --git a/arch/arm/boards/qil-a926x/Makefile b/arch/arm/boards/qil-a926x/Makefile
index 0c7bc3f04..82e46b369 100644
--- a/arch/arm/boards/qil-a926x/Makefile
+++ b/arch/arm/boards/qil-a926x/Makefile
@@ -1,2 +1,5 @@
obj-y += init.o
+
+lwl-y += lowlevel.o
+
bbenv-$(CONFIG_DEFAULT_ENVIRONMENT_GENERIC) += defaultenv-qil-a926x
diff --git a/arch/arm/boards/qil-a926x/lowlevel.c b/arch/arm/boards/qil-a926x/lowlevel.c
new file mode 100644
index 000000000..02896856d
--- /dev/null
+++ b/arch/arm/boards/qil-a926x/lowlevel.c
@@ -0,0 +1,26 @@
+/*
+ * Copyright (C) 2009-2013 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Under GPLv2
+ */
+
+#include <common.h>
+#include <init.h>
+
+#include <asm/barebox-arm-head.h>
+#include <asm/barebox-arm.h>
+
+#include <mach/at91sam9_sdramc.h>
+#include <mach/at91sam9260.h>
+#include <mach/hardware.h>
+
+void __naked __bare_init barebox_arm_reset_vector(void)
+{
+ arm_cpu_lowlevel_init();
+
+ arm_setup_stack(AT91SAM9260_SRAM_BASE + AT91SAM9260_SRAM_SIZE - 16);
+
+ barebox_arm_entry(AT91_CHIPSELECT_1,
+ at91_get_sdram_size(IOMEM(AT91SAM9260_BASE_SDRAMC)),
+ NULL);
+}
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 2410ff8a9..1604b8d43 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -289,7 +289,6 @@ config MACH_AT91SAM9260EK
config MACH_QIL_A9260
bool "CALAO QIL-A9260 board"
- select AT91SAM9260_LWL
help
Select this if you are using a Calao Systems QIL-A9260 Board.
<http://www.calao-systems.com>
@@ -407,7 +406,6 @@ config MACH_DSS11
config MACH_QIL_A9G20
bool "CALAO QIL-A9G20 board"
- select AT91SAM9260_LWL
help
Select this if you are using a Calao Systems QIL-A9G20 Board.
<http://www.calao-systems.com>
--
2.12.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2017-12-27 20:51 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-27 20:48 [PATCH v3 0/24] at91: " Sam Ravnborg
2017-12-27 20:50 ` [PATCH 01/24] arm: at91: refactor lowlevel_init selection Sam Ravnborg
2017-12-27 20:50 ` [PATCH 02/24] arm: at91: drop unused at91sam9x5_lowlevel_init.c Sam Ravnborg
2017-12-30 2:31 ` Andrey Smirnov
2017-12-27 20:50 ` [PATCH 03/24] arm: at91: add at91sam926x_board_init.h Sam Ravnborg
2017-12-30 2:56 ` Andrey Smirnov
2017-12-30 10:56 ` Sam Ravnborg
2017-12-27 20:50 ` [PATCH 04/24] at91sam9263ek: move reset vector to board code Sam Ravnborg
2017-12-27 20:50 ` [PATCH 05/24] at91sam9261ek, at91sam9g10ek: " Sam Ravnborg
2017-12-27 20:50 ` [PATCH 06/24] pm9261: " Sam Ravnborg
2017-12-27 20:50 ` [PATCH 07/24] at91: drop unused at91sam9261_lowlevel_init Sam Ravnborg
2017-12-27 20:50 ` [PATCH 08/24] pm9263: move reset vector to board code Sam Ravnborg
2017-12-27 20:50 ` [PATCH 09/24] usb-a926x: " Sam Ravnborg
2017-12-27 20:50 ` [PATCH 10/24] mmccpu: delete unused lowlevel_init Sam Ravnborg
2017-12-27 20:50 ` [PATCH 11/24] mmccpu: move reset vector to board code Sam Ravnborg
2017-12-27 20:50 ` [PATCH 12/24] tny-a926x: delete unused tny_a9263_lowlevel_init.c Sam Ravnborg
2017-12-27 20:50 ` [PATCH 13/24] tny-a926x: move reset vector to board code Sam Ravnborg
2017-12-27 20:50 ` Sam Ravnborg [this message]
2017-12-27 20:50 ` [PATCH 15/24] haba-knx: " Sam Ravnborg
2017-12-27 20:50 ` [PATCH 16/24] sama5d{3, 4}{xek, xplained}: " Sam Ravnborg
2017-12-27 20:50 ` [PATCH 17/24] at91sam9n12ek: " Sam Ravnborg
2017-12-27 20:50 ` [PATCH 18/24] at91sam9260ek, at91sam9g20ek: " Sam Ravnborg
2017-12-27 20:50 ` [PATCH 19/24] at91sam9m10g45ek, at91sam9m10ihd, pm9g45: " Sam Ravnborg
2017-12-27 20:50 ` [PATCH 20/24] animeo: " Sam Ravnborg
2017-12-27 20:50 ` [PATCH 21/24] telit-evk-pro3: " Sam Ravnborg
2017-12-27 20:50 ` [PATCH 22/24] dss11: " Sam Ravnborg
2017-12-27 20:50 ` [PATCH 23/24] at91rm9200ek: " Sam Ravnborg
2017-12-27 20:50 ` [PATCH 24/24] arm: at91: remove leftovers from moving reset code in mach-at91 Sam Ravnborg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171227205033.26012-14-sam@ravnborg.org \
--to=sam@ravnborg.org \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox