From: Sam Ravnborg <sam@ravnborg.org>
To: Barebox List <barebox@lists.infradead.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Subject: [PATCH 06/24] pm9261: move reset vector to board code
Date: Wed, 27 Dec 2017 21:50:15 +0100 [thread overview]
Message-ID: <20171227205033.26012-6-sam@ravnborg.org> (raw)
In-Reply-To: <20171227204842.GA20040@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
---
arch/arm/boards/pm9261/lowlevel_init.c | 39 +++++++++++++++++++++++++---------
arch/arm/mach-at91/Kconfig | 3 +--
2 files changed, 30 insertions(+), 12 deletions(-)
diff --git a/arch/arm/boards/pm9261/lowlevel_init.c b/arch/arm/boards/pm9261/lowlevel_init.c
index 91a64b415..a4cb8af69 100644
--- a/arch/arm/boards/pm9261/lowlevel_init.c
+++ b/arch/arm/boards/pm9261/lowlevel_init.c
@@ -4,22 +4,16 @@
* Under GPLv2
*/
-#include <common.h>
-#include <init.h>
-#include <mach/hardware.h>
-#include <mach/at91_rstc.h>
-#include <mach/at91_wdt.h>
-#include <mach/at91_pmc.h>
-#include <mach/at91sam9_smc.h>
-#include <mach/at91sam9_sdramc.h>
+#include <asm/barebox-arm.h>
+
+#include <mach/at91sam926x_board_init.h>
#include <mach/at91sam9_matrix.h>
-#include <mach/at91_lowlevel_init.h>
#define MASTER_PLL_DIV 15
#define MASTER_PLL_MUL 162
#define MAIN_PLL_DIV 2
-void __bare_init at91sam926x_lowlevel_board_config(struct at91sam926x_lowlevel_cfg *cfg)
+static void __bare_init pm9261_board_config(struct at91sam926x_board_cfg *cfg)
{
/* Disable Watchdog */
cfg->wdt_mr =
@@ -100,3 +94,28 @@ void __bare_init at91sam926x_lowlevel_board_config(struct at91sam926x_lowlevel_c
AT91_RSTC_RSTTYP_WAKEUP |
AT91_RSTC_RSTTYP_WATCHDOG;
}
+
+static void __bare_init pm9261_init(void)
+{
+ struct at91sam926x_board_cfg cfg;
+
+ cfg.pio = IOMEM(AT91SAM9261_BASE_PIOC);
+ cfg.sdramc = IOMEM(AT91SAM9261_BASE_SDRAMC);
+ cfg.ebi_pio_is_peripha = false;
+ cfg.matrix_csa = AT91_MATRIX_EBICSA;
+
+ pm9261_board_config(&cfg);
+ at91sam926x_board_init(&cfg);
+
+ barebox_arm_entry(AT91_CHIPSELECT_1, at91_get_sdram_size(cfg.sdramc),
+ NULL);
+}
+
+void __naked __bare_init barebox_arm_reset_vector(void)
+{
+ arm_cpu_lowlevel_init();
+
+ arm_setup_stack(AT91SAM9261_SRAM_BASE + AT91SAM9261_SRAM_SIZE - 16);
+
+ pm9261_init();
+}
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index be2173185..14ea5e4e2 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -345,8 +345,7 @@ config MACH_PM9261
bool "Ronetix PM9261"
select HAS_DM9000
select HAVE_AT91_BOOTSTRAP
- select AT91SAM9261_LWL
- select AT91SAM926X_LWL
+ select AT91SAM926X_BOARD_INIT
help
Say y here if you are using the Ronetix PM9261 Board
--
2.12.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2017-12-27 20:51 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-27 20:48 [PATCH v3 0/24] at91: " Sam Ravnborg
2017-12-27 20:50 ` [PATCH 01/24] arm: at91: refactor lowlevel_init selection Sam Ravnborg
2017-12-27 20:50 ` [PATCH 02/24] arm: at91: drop unused at91sam9x5_lowlevel_init.c Sam Ravnborg
2017-12-30 2:31 ` Andrey Smirnov
2017-12-27 20:50 ` [PATCH 03/24] arm: at91: add at91sam926x_board_init.h Sam Ravnborg
2017-12-30 2:56 ` Andrey Smirnov
2017-12-30 10:56 ` Sam Ravnborg
2017-12-27 20:50 ` [PATCH 04/24] at91sam9263ek: move reset vector to board code Sam Ravnborg
2017-12-27 20:50 ` [PATCH 05/24] at91sam9261ek, at91sam9g10ek: " Sam Ravnborg
2017-12-27 20:50 ` Sam Ravnborg [this message]
2017-12-27 20:50 ` [PATCH 07/24] at91: drop unused at91sam9261_lowlevel_init Sam Ravnborg
2017-12-27 20:50 ` [PATCH 08/24] pm9263: move reset vector to board code Sam Ravnborg
2017-12-27 20:50 ` [PATCH 09/24] usb-a926x: " Sam Ravnborg
2017-12-27 20:50 ` [PATCH 10/24] mmccpu: delete unused lowlevel_init Sam Ravnborg
2017-12-27 20:50 ` [PATCH 11/24] mmccpu: move reset vector to board code Sam Ravnborg
2017-12-27 20:50 ` [PATCH 12/24] tny-a926x: delete unused tny_a9263_lowlevel_init.c Sam Ravnborg
2017-12-27 20:50 ` [PATCH 13/24] tny-a926x: move reset vector to board code Sam Ravnborg
2017-12-27 20:50 ` [PATCH 14/24] qil-a926x: " Sam Ravnborg
2017-12-27 20:50 ` [PATCH 15/24] haba-knx: " Sam Ravnborg
2017-12-27 20:50 ` [PATCH 16/24] sama5d{3, 4}{xek, xplained}: " Sam Ravnborg
2017-12-27 20:50 ` [PATCH 17/24] at91sam9n12ek: " Sam Ravnborg
2017-12-27 20:50 ` [PATCH 18/24] at91sam9260ek, at91sam9g20ek: " Sam Ravnborg
2017-12-27 20:50 ` [PATCH 19/24] at91sam9m10g45ek, at91sam9m10ihd, pm9g45: " Sam Ravnborg
2017-12-27 20:50 ` [PATCH 20/24] animeo: " Sam Ravnborg
2017-12-27 20:50 ` [PATCH 21/24] telit-evk-pro3: " Sam Ravnborg
2017-12-27 20:50 ` [PATCH 22/24] dss11: " Sam Ravnborg
2017-12-27 20:50 ` [PATCH 23/24] at91rm9200ek: " Sam Ravnborg
2017-12-27 20:50 ` [PATCH 24/24] arm: at91: remove leftovers from moving reset code in mach-at91 Sam Ravnborg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171227205033.26012-6-sam@ravnborg.org \
--to=sam@ravnborg.org \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox