From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from asavdk3.altibox.net ([109.247.116.14]) by bombadil.infradead.org with esmtps (Exim 4.89 #1 (Red Hat Linux)) id 1eW0tz-0003Mg-KY for barebox@lists.infradead.org; Mon, 01 Jan 2018 14:17:21 +0000 From: Sam Ravnborg Date: Mon, 1 Jan 2018 15:16:39 +0100 Message-Id: <20180101141659.19554-4-sam@ravnborg.org> In-Reply-To: <20171231083407.GA16645@ravnborg.org> References: <20171231083407.GA16645@ravnborg.org> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: [PATCH 05/25] at91sam9263ek: move reset vector to board code To: Barebox List Cc: Sam Ravnborg Move reset code to the board specific code. This drops the dependency where mach-at91/ code calls into the board code. Drop the now (for this board) unessesary CONFIG select's Signed-off-by: Sam Ravnborg --- arch/arm/boards/at91sam9263ek/lowlevel_init.c | 43 ++++++++++++++++++++------- arch/arm/mach-at91/Kconfig | 3 +- 2 files changed, 33 insertions(+), 13 deletions(-) diff --git a/arch/arm/boards/at91sam9263ek/lowlevel_init.c b/arch/arm/boards/at91sam9263ek/lowlevel_init.c index 2f8b312d3..70e0da3b1 100644 --- a/arch/arm/boards/at91sam9263ek/lowlevel_init.c +++ b/arch/arm/boards/at91sam9263ek/lowlevel_init.c @@ -4,21 +4,17 @@ * Under GPLv2 */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include +#include + +#include + +#include +#include #define MASTER_PLL_MUL 171 #define MASTER_PLL_DIV 14 -void __bare_init at91sam926x_lowlevel_board_config(struct at91sam926x_lowlevel_cfg *cfg) +static void __bare_init at91sam9263ek_board_config(struct at91sam926x_board_cfg *cfg) { /* Disable Watchdog */ cfg->wdt_mr = @@ -102,3 +98,28 @@ void __bare_init at91sam926x_lowlevel_board_config(struct at91sam926x_lowlevel_c AT91_RSTC_RSTTYP_WAKEUP | AT91_RSTC_RSTTYP_WATCHDOG; } + +static void __bare_init at91sam9263ek_init(void) +{ + struct at91sam926x_board_cfg cfg; + + cfg.pio = IOMEM(AT91SAM9263_BASE_PIOD); + cfg.sdramc = IOMEM(AT91SAM9263_BASE_SDRAMC0); + cfg.ebi_pio_is_peripha = true; + cfg.matrix_csa = AT91_MATRIX_EBI0CSA; + + at91sam9263ek_board_config(&cfg); + at91sam926x_board_init(&cfg); + + barebox_arm_entry(AT91_CHIPSELECT_1, at91_get_sdram_size(cfg.sdramc), + NULL); +} + +void __naked __bare_init barebox_arm_reset_vector(void) +{ + arm_cpu_lowlevel_init(); + + arm_setup_stack(AT91SAM9263_SRAM0_BASE + AT91SAM9263_SRAM0_SIZE - 16); + + at91sam9263ek_init(); +} diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 670ef1a39..e7b664e9a 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -442,8 +442,7 @@ config MACH_AT91SAM9263EK bool "Atmel AT91SAM9263-EK" select HAVE_NAND_ATMEL_BUSWIDTH_16 select HAVE_AT91_BOOTSTRAP - select AT91SAM9263_LWL - select AT91SAM926X_LWL + select AT91SAM926X_BOARD_INIT help Say y here if you are using Atmel's AT91SAM9263-EK Evaluation board -- 2.12.0 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox