mail archive of the barebox mailing list
 help / color / mirror / Atom feed
* [PATCH v4 0/25] at91: move reset vector to board code
@ 2017-12-31  8:34 Sam Ravnborg
  2018-01-01  8:34 ` Mails lost towards barebox mailing list [Was: [PATCH v4 0/25] at91: move ...] Sam Ravnborg
                   ` (26 more replies)
  0 siblings, 27 replies; 35+ messages in thread
From: Sam Ravnborg @ 2017-12-31  8:34 UTC (permalink / raw)
  To: Barebox List; +Cc: Andrey Smirnov, Sam Ravnborg

The following patchset moves the reset vector
for at91 boards from mach-at91 to board code.
This is similar to what other boards do and is done to
prepare for multi-image and DT support.

The patchset convert all boards and thus clean up the
old code that resided in mach-at91/

The first patch have minimal impact, but prepares for a
board-by-board conversion.
All temporary CONFIG symbols are gone at the end of this series.

I kept Jean-Christophe PLAGNIOL-VILLARD and others
copyright in all the created files and did not add
copyright myself. The patchset does IMO not add any
copyrightable material from my side as this is
in reality just moving around code.

With this patchset applied we no longer have any
places where we call board code from mach-at91/
thus allowing us to introduce multi-images.
And we are also on the right track to introduce
DT support for additional AT91 based boards.

The patchset was successfully booted on a AT91SAM9263EK,
and all defconfigs was built (expect the ones that failed
to build before this patchset was applied).

I consider the patchset ready for barebox-next.

	Sam

Changes v4 => v3
  Updated at91sam926x_board_init.h based on feedback from Andrey Smirnov

Changes v2 => v3
  v2 was posted in July - but I have lacked spare time until now
  to give it a proper respin
  - respin of all patches on top of v2017.12.0
  - fix bogus handling of at91sam926x_board_init
  - Introduce new CONFIG symbol for at91sam926x_board_init to allow bisects

Changes v1 => v2
  - converted all boards over
  - fixed author info


Sam Ravnborg (25):
      arm: at91: refactor lowlevel_init selection
      arm: at91: drop unused at91sam9x5_lowlevel_init.c
      arm: at91: add at91sam926x_board_init.h
      arm: at91: code cleanup in at91sam926x_board_init
      at91sam9263ek: move reset vector to board code
      at91sam9261ek, at91sam9g10ek: move reset vector to board code
      pm9261: move reset vector to board code
      at91: drop unused at91sam9261_lowlevel_init
      pm9263: move reset vector to board code
      usb-a926x: move reset vector to board code
      mmccpu: delete unused lowlevel_init
      mmccpu: move reset vector to board code
      tny-a926x: delete unused tny_a9263_lowlevel_init.c
      tny-a926x: move reset vector to board code
      qil-a926x: move reset vector to board code
      haba-knx: move reset vector to board code
      sama5d{3,4}{xek,xplained}: move reset vector to board code
      at91sam9n12ek: move reset vector to board code
      at91sam9260ek, at91sam9g20ek: move reset vector to board code
      at91sam9m10g45ek, at91sam9m10ihd, pm9g45: move reset vector to board code
      animeo: move reset vector to board code
      telit-evk-pro3: move reset vector to board code
      dss11: move reset vector to board code
      at91rm9200ek: move reset vector to board code
      arm: at91: remove leftovers from moving reset code in mach-at91


# git diff --stat=120 -M -C HEAD~36..HEAD~11
# Note options above to let git track copies/renames
 arch/arm/boards/animeo_ip/Makefile                                          |   3 +
 arch/arm/{mach-at91/sama5d3_lowlevel_init.c => boards/animeo_ip/lowlevel.c} |  17 +++--
 arch/arm/boards/at91rm9200ek/Makefile                                       |   3 +
 .../at91rm9200_lowlevel_init.c => boards/at91rm9200ek/lowlevel.c}           |  14 ++--
 arch/arm/boards/at91sam9260ek/Makefile                                      |   3 +
 .../{mach-at91/sama5d3_lowlevel_init.c => boards/at91sam9260ek/lowlevel.c}  |  17 +++--
 arch/arm/boards/at91sam9261ek/Makefile                                      |   2 +-
 arch/arm/boards/at91sam9261ek/lowlevel_init.c                               |  41 +++++++---
 arch/arm/boards/at91sam9263ek/Makefile                                      |   2 +-
 arch/arm/boards/at91sam9263ek/lowlevel_init.c                               |  43 ++++++++---
 arch/arm/boards/at91sam9m10g45ek/Makefile                                   |   3 +
 .../at91sam9g45_lowlevel_init.c => boards/at91sam9m10g45ek/lowlevel.c}      |  11 +--
 arch/arm/boards/at91sam9m10ihd/Makefile                                     |   2 +
 .../at91sam9x5_lowlevel_init.c => boards/at91sam9m10ihd/lowlevel.c}         |  19 +++--
 arch/arm/boards/at91sam9n12ek/Makefile                                      |   3 +
 .../at91sam9n12_lowlevel_init.c => boards/at91sam9n12ek/lowlevel.c}         |  13 ++--
 arch/arm/boards/dss11/Makefile                                              |   2 +
 arch/arm/{mach-at91/sama5d3_lowlevel_init.c => boards/dss11/lowlevel.c}     |  17 +++--
 arch/arm/boards/haba-knx/Makefile                                           |   3 +
 arch/arm/{mach-at91/sama5d3_lowlevel_init.c => boards/haba-knx/lowlevel.c}  |  17 +++--
 arch/arm/boards/mmccpu/Makefile                                             |   2 +-
 .../arm/{mach-at91/at91sam9n12_lowlevel_init.c => boards/mmccpu/lowlevel.c} |  19 +++--
 arch/arm/boards/mmccpu/lowlevel_init.c                                      | 135 --------------------------------
 arch/arm/boards/pm9261/Makefile                                             |   2 +-
 arch/arm/boards/pm9261/lowlevel_init.c                                      |  39 +++++++---
 arch/arm/boards/pm9263/Makefile                                             |   2 +-
 arch/arm/boards/pm9263/lowlevel_init.c                                      |  43 ++++++++---
 arch/arm/boards/pm9g45/Makefile                                             |   3 +
 .../arm/{mach-at91/at91sam9g45_lowlevel_init.c => boards/pm9g45/lowlevel.c} |  13 ++--
 arch/arm/boards/qil-a926x/Makefile                                          |   3 +
 arch/arm/{mach-at91/sama5d3_lowlevel_init.c => boards/qil-a926x/lowlevel.c} |  17 +++--
 arch/arm/boards/sama5d3_xplained/Makefile                                   |   1 +
 .../sama5d3_lowlevel_init.c => boards/sama5d3_xplained/lowlevel.c}          |  10 +--
 arch/arm/boards/sama5d3xek/Makefile                                         |   1 +
 .../arm/{mach-at91/sama5d3_lowlevel_init.c => boards/sama5d3xek/lowlevel.c} |  10 +--
 arch/arm/boards/sama5d4_xplained/Makefile                                   |   1 +
 .../sama5d3_lowlevel_init.c => boards/sama5d4_xplained/lowlevel.c}          |  10 +--
 arch/arm/boards/sama5d4ek/Makefile                                          |   1 +
 arch/arm/{mach-at91/sama5d3_lowlevel_init.c => boards/sama5d4ek/lowlevel.c} |  10 +--
 arch/arm/boards/telit-evk-pro3/Makefile                                     |   2 +
 .../{mach-at91/sama5d3_lowlevel_init.c => boards/telit-evk-pro3/lowlevel.c} |  17 +++--
 arch/arm/boards/tny-a926x/Makefile                                          |   8 +-
 .../sama5d3_lowlevel_init.c => boards/tny-a926x/tny_a9260_lowlevel.c}       |  17 +++--
 .../at91sam9n12_lowlevel_init.c => boards/tny-a926x/tny_a9263_lowlevel.c}   |  19 +++--
 arch/arm/boards/tny-a926x/tny_a9263_lowlevel_init.c                         | 107 --------------------------
 arch/arm/boards/usb-a926x/Makefile                                          |   8 +-
 .../sama5d3_lowlevel_init.c => boards/usb-a926x/usb_a9260_lowlevel.c}       |  17 +++--
 .../boards/usb-a926x/{usb_a9263_lowlevel_init.c => usb_a9263_lowlevel.c}    |  43 ++++++++---
 arch/arm/mach-at91/Kconfig                                                  |  31 ++++----
 arch/arm/mach-at91/Makefile                                                 |  14 +---
 arch/arm/mach-at91/at91sam9260_lowlevel_init.c                              |  48 ------------
 arch/arm/mach-at91/at91sam9261_lowlevel_init.c                              |  48 ------------
 arch/arm/mach-at91/at91sam9263_lowlevel_init.c                              |  48 ------------
 arch/arm/mach-at91/include/mach/at91_lowlevel_init.h                        |  46 -----------
 .../{at91sam926x_lowlevel_init.c => include/mach/at91sam926x_board_init.h}  | 148 ++++++++++++++++--------------------
 55 files changed, 422 insertions(+), 756 deletions(-)

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 35+ messages in thread

end of thread, other threads:[~2018-01-06 20:06 UTC | newest]

Thread overview: 35+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-12-31  8:34 [PATCH v4 0/25] at91: move reset vector to board code Sam Ravnborg
2018-01-01  8:34 ` Mails lost towards barebox mailing list [Was: [PATCH v4 0/25] at91: move ...] Sam Ravnborg
2018-01-01 17:05   ` Sam Ravnborg
2018-01-03 18:19     ` Sam Ravnborg
2018-01-01 14:16 ` [PATCH 02/25] arm: at91: drop unused at91sam9x5_lowlevel_init.c Sam Ravnborg
2018-01-01 14:16 ` [PATCH 03/25] arm: at91: add at91sam926x_board_init.h Sam Ravnborg
2018-01-01 14:16 ` [PATCH 04/25] arm: at91: code cleanup in at91sam926x_board_init Sam Ravnborg
2018-01-01 14:16 ` [PATCH 05/25] at91sam9263ek: move reset vector to board code Sam Ravnborg
2018-01-01 14:16 ` [PATCH 06/25] at91sam9261ek, at91sam9g10ek: " Sam Ravnborg
2018-01-01 14:16 ` [PATCH 07/25] pm9261: " Sam Ravnborg
2018-01-01 14:16 ` [PATCH 08/25] at91: drop unused at91sam9261_lowlevel_init Sam Ravnborg
2018-01-01 14:16 ` [PATCH 09/25] pm9263: move reset vector to board code Sam Ravnborg
2018-01-01 14:18 ` [PATCH 11/25] mmccpu: delete unused lowlevel_init Sam Ravnborg
2018-01-05  9:14   ` Sascha Hauer
2018-01-06  9:33     ` Sam Ravnborg
2018-01-01 14:18 ` [PATCH 12/25] mmccpu: move reset vector to board code Sam Ravnborg
2018-01-01 14:18 ` [PATCH 13/25] tny-a926x: delete unused tny_a9263_lowlevel_init.c Sam Ravnborg
2018-01-01 14:19 ` [PATCH 17/25] sama5d{3, 4}{xek, xplained}: move reset vector to board code Sam Ravnborg
2018-01-05  9:27   ` Sascha Hauer
2018-01-06 20:06     ` Sam Ravnborg
2018-01-01 14:19 ` [PATCH 18/25] at91sam9n12ek: " Sam Ravnborg
2018-01-01 14:19 ` [PATCH 19/25] at91sam9260ek, at91sam9g20ek: " Sam Ravnborg
2018-01-01 14:19 ` [PATCH 20/25] at91sam9m10g45ek, at91sam9m10ihd, pm9g45: " Sam Ravnborg
2018-01-01 14:19 ` [PATCH 21/25] animeo: " Sam Ravnborg
2018-01-01 14:19 ` [PATCH 22/25] telit-evk-pro3: " Sam Ravnborg
2018-01-01 14:19 ` [PATCH 23/25] dss11: " Sam Ravnborg
2018-01-01 14:19 ` [PATCH 24/25] at91rm9200ek: " Sam Ravnborg
2018-01-01 14:19 ` [PATCH 25/25] arm: at91: remove leftovers from moving reset code in mach-at91 Sam Ravnborg
2018-01-01 16:48 ` [PATCH 01/25] arm: at91: refactor lowlevel_init selection Sam Ravnborg
2018-01-05  9:24   ` Sascha Hauer
2018-01-01 16:48 ` [PATCH 10/25] usb-a926x: move reset vector to board code Sam Ravnborg
2018-01-01 16:48 ` [PATCH 14/25] tny-a926x: " Sam Ravnborg
2018-01-01 16:48 ` [PATCH 15/25] qil-a926x: " Sam Ravnborg
2018-01-01 16:48 ` [PATCH 16/25] haba-knx: " Sam Ravnborg
2018-01-04 17:12 ` [PATCH v4 0/25] at91: " Andrey Smirnov

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox