mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sam Ravnborg <sam@ravnborg.org>
To: Barebox List <barebox@lists.infradead.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Subject: [PATCH 19/25] at91sam9260ek, at91sam9g20ek: move reset vector to board code
Date: Mon,  1 Jan 2018 15:19:33 +0100	[thread overview]
Message-ID: <20180101141939.20606-3-sam@ravnborg.org> (raw)
In-Reply-To: <20171231083407.GA16645@ravnborg.org>

Create new lowlevel.c that contains the reset vector.
Drop unused CONFIG symbols

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
---
 arch/arm/boards/at91sam9260ek/Makefile   |  3 +++
 arch/arm/boards/at91sam9260ek/lowlevel.c | 26 ++++++++++++++++++++++++++
 arch/arm/mach-at91/Kconfig               |  2 --
 3 files changed, 29 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm/boards/at91sam9260ek/lowlevel.c

diff --git a/arch/arm/boards/at91sam9260ek/Makefile b/arch/arm/boards/at91sam9260ek/Makefile
index 6e07f189f..9cc933a28 100644
--- a/arch/arm/boards/at91sam9260ek/Makefile
+++ b/arch/arm/boards/at91sam9260ek/Makefile
@@ -1,2 +1,5 @@
 obj-y += init.o
+
+lwl-y += lowlevel.o
+
 bbenv-$(CONFIG_DEFAULT_ENVIRONMENT_GENERIC) += defaultenv-at91sam9260ek
diff --git a/arch/arm/boards/at91sam9260ek/lowlevel.c b/arch/arm/boards/at91sam9260ek/lowlevel.c
new file mode 100644
index 000000000..02896856d
--- /dev/null
+++ b/arch/arm/boards/at91sam9260ek/lowlevel.c
@@ -0,0 +1,26 @@
+/*
+ * Copyright (C) 2009-2013 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Under GPLv2
+  */
+
+#include <common.h>
+#include <init.h>
+
+#include <asm/barebox-arm-head.h>
+#include <asm/barebox-arm.h>
+
+#include <mach/at91sam9_sdramc.h>
+#include <mach/at91sam9260.h>
+#include <mach/hardware.h>
+
+void __naked __bare_init barebox_arm_reset_vector(void)
+{
+	arm_cpu_lowlevel_init();
+
+	arm_setup_stack(AT91SAM9260_SRAM_BASE + AT91SAM9260_SRAM_SIZE - 16);
+
+	barebox_arm_entry(AT91_CHIPSELECT_1,
+			  at91_get_sdram_size(IOMEM(AT91SAM9260_BASE_SDRAMC)),
+			  NULL);
+}
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 94d85dbcf..69d6d6fc1 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -276,7 +276,6 @@ config MACH_ANIMEO_IP
 
 config MACH_AT91SAM9260EK
 	bool "Atmel AT91SAM9260-EK"
-	select AT91SAM9260_LWL
 	select HAVE_NAND_ATMEL_BUSWIDTH_16
 	help
 	  Say y here if you are using Atmel's AT91SAM9260-EK Evaluation board
@@ -371,7 +370,6 @@ choice
 config MACH_AT91SAM9G20EK
 	bool "Atmel AT91SAM9G20-EK Evaluation Kit"
 	select HAVE_NAND_ATMEL_BUSWIDTH_16
-	select AT91SAM9260_LWL
 	help
 	  Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit
 	  that embeds only one SD/MMC slot.
-- 
2.12.0


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2018-01-01 14:19 UTC|newest]

Thread overview: 35+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-12-31  8:34 [PATCH v4 0/25] at91: " Sam Ravnborg
2018-01-01  8:34 ` Mails lost towards barebox mailing list [Was: [PATCH v4 0/25] at91: move ...] Sam Ravnborg
2018-01-01 17:05   ` Sam Ravnborg
2018-01-03 18:19     ` Sam Ravnborg
2018-01-01 14:16 ` [PATCH 02/25] arm: at91: drop unused at91sam9x5_lowlevel_init.c Sam Ravnborg
2018-01-01 14:16 ` [PATCH 03/25] arm: at91: add at91sam926x_board_init.h Sam Ravnborg
2018-01-01 14:16 ` [PATCH 04/25] arm: at91: code cleanup in at91sam926x_board_init Sam Ravnborg
2018-01-01 14:16 ` [PATCH 05/25] at91sam9263ek: move reset vector to board code Sam Ravnborg
2018-01-01 14:16 ` [PATCH 06/25] at91sam9261ek, at91sam9g10ek: " Sam Ravnborg
2018-01-01 14:16 ` [PATCH 07/25] pm9261: " Sam Ravnborg
2018-01-01 14:16 ` [PATCH 08/25] at91: drop unused at91sam9261_lowlevel_init Sam Ravnborg
2018-01-01 14:16 ` [PATCH 09/25] pm9263: move reset vector to board code Sam Ravnborg
2018-01-01 14:18 ` [PATCH 11/25] mmccpu: delete unused lowlevel_init Sam Ravnborg
2018-01-05  9:14   ` Sascha Hauer
2018-01-06  9:33     ` Sam Ravnborg
2018-01-01 14:18 ` [PATCH 12/25] mmccpu: move reset vector to board code Sam Ravnborg
2018-01-01 14:18 ` [PATCH 13/25] tny-a926x: delete unused tny_a9263_lowlevel_init.c Sam Ravnborg
2018-01-01 14:19 ` [PATCH 17/25] sama5d{3, 4}{xek, xplained}: move reset vector to board code Sam Ravnborg
2018-01-05  9:27   ` Sascha Hauer
2018-01-06 20:06     ` Sam Ravnborg
2018-01-01 14:19 ` [PATCH 18/25] at91sam9n12ek: " Sam Ravnborg
2018-01-01 14:19 ` Sam Ravnborg [this message]
2018-01-01 14:19 ` [PATCH 20/25] at91sam9m10g45ek, at91sam9m10ihd, pm9g45: " Sam Ravnborg
2018-01-01 14:19 ` [PATCH 21/25] animeo: " Sam Ravnborg
2018-01-01 14:19 ` [PATCH 22/25] telit-evk-pro3: " Sam Ravnborg
2018-01-01 14:19 ` [PATCH 23/25] dss11: " Sam Ravnborg
2018-01-01 14:19 ` [PATCH 24/25] at91rm9200ek: " Sam Ravnborg
2018-01-01 14:19 ` [PATCH 25/25] arm: at91: remove leftovers from moving reset code in mach-at91 Sam Ravnborg
2018-01-01 16:48 ` [PATCH 01/25] arm: at91: refactor lowlevel_init selection Sam Ravnborg
2018-01-05  9:24   ` Sascha Hauer
2018-01-01 16:48 ` [PATCH 10/25] usb-a926x: move reset vector to board code Sam Ravnborg
2018-01-01 16:48 ` [PATCH 14/25] tny-a926x: " Sam Ravnborg
2018-01-01 16:48 ` [PATCH 15/25] qil-a926x: " Sam Ravnborg
2018-01-01 16:48 ` [PATCH 16/25] haba-knx: " Sam Ravnborg
2018-01-04 17:12 ` [PATCH v4 0/25] at91: " Andrey Smirnov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180101141939.20606-3-sam@ravnborg.org \
    --to=sam@ravnborg.org \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox