From: Sam Ravnborg <sam@ravnborg.org>
To: Barebox List <barebox@lists.infradead.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Subject: [PATCH v5 0/22] at91: move reset vector to board code
Date: Sat, 6 Jan 2018 22:04:50 +0100 [thread overview]
Message-ID: <20180106210450.GA21127@ravnborg.org> (raw)
Hi all.
The following patchset moves the reset vector
for at91 boards from mach-at91 to board code.
This is similar to what other boards do and is done to
prepare for multi-image and DT support.
The patchset includes removal of the mmccpu board.
The patchset convert all at91 boards and thus clean up
the old code that resided in mach-at91/
The second patch have minimal impact, but prepares for a
board-by-board conversion.
All temporary CONFIG symbols are gone at the end of this series.
I kept Jean-Christophe PLAGNIOL-VILLARD and others
copyright in all the created files and did not add
copyright myself. The patchset does IMO not add any
copyrightable material from my side as this is
in reality just moving around code.
With this patchset applied we no longer have any
places where we call board code from mach-at91/
thus allowing us to introduce multi-images.
And we are also on the right track to introduce
DT support for additional AT91 based boards.
The patchset was successfully booted on a AT91SAM9263EK,
and all defconfigs was built (expect the ones that failed
to build before this patchset was applied).
I consider the patchset ready for barebox-next.
Sam
Changes v4 => v5
Fix whitespace issues all over (Sascha)
Include lowlevel_init for tny_a9263 (Sascha)
Delete mmccpu and updated patchset (Sascha)
Use proper versioning of patches (Andrey)
Combined a few patches deleting code (Sam)
Changes v3 => v4
Updated at91sam926x_board_init.h based on feedback from Andrey Smirnov
Changes v2 => v3
v2 was posted in July - but I have lacked spare time until now
to give it a proper respin
- respin of all patches on top of v2017.12.0
- fix bogus handling of at91sam926x_board_init
- Introduce new CONFIG symbol for at91sam926x_board_init to allow bisects
Changes v1 => v2
- converted all boards over
- fixed author info
Sam Ravnborg (22):
at91: mmccpu: remove board support for mmccpu
arm: at91: refactor lowlevel_init selection
arm: at91: drop unused at91sam9x5_lowlevel_init.c
arm: at91: add at91sam926x_board_init.h
arm: at91: code cleanup in at91sam926x_board_init
at91sam9263ek: move reset vector to board code
at91sam9261ek, at91sam9g10ek: move reset vector to board code
pm9261: move reset vector to board code
at91: drop unused at91sam9261_lowlevel_init
pm9263: move reset vector to board code
{usb,tny}-a926x: move reset vector to board code
qil-a926x: move reset vector to board code
haba-knx: move reset vector to board code
sama5d{3,4}{xek,xplained}: move reset vector to board code
at91sam9n12ek: move reset vector to board code
at91sam9260ek, at91sam9g20ek: move reset vector to board code
at91sam9m10g45ek, at91sam9m10ihd, pm9g45: move reset vector to board code
animeo: move reset vector to board code
telit-evk-pro3: move reset vector to board code
dss11: move reset vector to board code
at91rm9200ek: move reset vector to board code
arm: at91: remove leftovers from moving reset code in mach-at91
#git diff --stat=120 -M -C
arch/arm/boards/Makefile | 1 -
arch/arm/boards/animeo_ip/Makefile | 3 +
arch/arm/{mach-at91/sama5d3_lowlevel_init.c => boards/animeo_ip/lowlevel.c} | 19 ++---
arch/arm/boards/at91rm9200ek/Makefile | 3 +
.../at91rm9200_lowlevel_init.c => boards/at91rm9200ek/lowlevel.c} | 14 ++--
arch/arm/boards/at91sam9260ek/Makefile | 3 +
.../{mach-at91/sama5d3_lowlevel_init.c => boards/at91sam9260ek/lowlevel.c} | 19 ++---
arch/arm/boards/at91sam9261ek/Makefile | 2 +-
arch/arm/boards/at91sam9261ek/lowlevel_init.c | 41 +++++++---
arch/arm/boards/at91sam9263ek/Makefile | 2 +-
arch/arm/boards/at91sam9263ek/lowlevel_init.c | 43 ++++++++---
arch/arm/boards/at91sam9m10g45ek/Makefile | 3 +
.../at91sam9g45_lowlevel_init.c => boards/at91sam9m10g45ek/lowlevel.c} | 13 ++--
arch/arm/boards/at91sam9m10ihd/Makefile | 2 +
.../at91sam9x5_lowlevel_init.c => boards/at91sam9m10ihd/lowlevel.c} | 21 +++--
arch/arm/boards/at91sam9n12ek/Makefile | 3 +
.../at91sam9n12_lowlevel_init.c => boards/at91sam9n12ek/lowlevel.c} | 15 ++--
arch/arm/boards/dss11/Makefile | 2 +
arch/arm/{mach-at91/sama5d3_lowlevel_init.c => boards/dss11/lowlevel.c} | 19 ++---
arch/arm/boards/haba-knx/Makefile | 3 +
arch/arm/{mach-at91/sama5d3_lowlevel_init.c => boards/haba-knx/lowlevel.c} | 19 ++---
arch/arm/boards/mmccpu/Makefile | 3 -
arch/arm/boards/mmccpu/env/bin/_update | 36 ---------
arch/arm/boards/mmccpu/env/bin/boot | 47 ------------
arch/arm/boards/mmccpu/env/bin/init | 33 --------
arch/arm/boards/mmccpu/env/bin/update_kernel | 15 ----
arch/arm/boards/mmccpu/env/bin/update_root | 16 ----
arch/arm/boards/mmccpu/env/config | 30 --------
arch/arm/boards/mmccpu/init.c | 88 ---------------------
arch/arm/boards/mmccpu/lowlevel_init.c | 135 --------------------------------
arch/arm/boards/pm9261/Makefile | 2 +-
arch/arm/boards/pm9261/lowlevel_init.c | 39 +++++++---
arch/arm/boards/pm9263/Makefile | 2 +-
arch/arm/boards/pm9263/lowlevel_init.c | 43 ++++++++---
arch/arm/boards/pm9g45/Makefile | 3 +
.../arm/{mach-at91/at91sam9g45_lowlevel_init.c => boards/pm9g45/lowlevel.c} | 15 ++--
arch/arm/boards/qil-a926x/Makefile | 3 +
arch/arm/{mach-at91/sama5d3_lowlevel_init.c => boards/qil-a926x/lowlevel.c} | 19 ++---
arch/arm/boards/sama5d3_xplained/Makefile | 1 +
.../sama5d3_lowlevel_init.c => boards/sama5d3_xplained/lowlevel.c} | 12 ++-
arch/arm/boards/sama5d3xek/Makefile | 1 +
.../arm/{mach-at91/sama5d3_lowlevel_init.c => boards/sama5d3xek/lowlevel.c} | 12 ++-
arch/arm/boards/sama5d4_xplained/Makefile | 1 +
.../sama5d3_lowlevel_init.c => boards/sama5d4_xplained/lowlevel.c} | 12 ++-
arch/arm/boards/sama5d4ek/Makefile | 1 +
arch/arm/{mach-at91/sama5d3_lowlevel_init.c => boards/sama5d4ek/lowlevel.c} | 12 ++-
arch/arm/boards/telit-evk-pro3/Makefile | 2 +
.../{mach-at91/sama5d3_lowlevel_init.c => boards/telit-evk-pro3/lowlevel.c} | 19 ++---
arch/arm/boards/tny-a926x/Makefile | 9 ++-
.../sama5d3_lowlevel_init.c => boards/tny-a926x/tny_a9260_lowlevel.c} | 19 ++---
.../boards/tny-a926x/{tny_a9263_lowlevel_init.c => tny_a9263_lowlevel.c} | 49 ++++++++----
arch/arm/boards/usb-a926x/Makefile | 8 +-
.../sama5d3_lowlevel_init.c => boards/usb-a926x/usb_a9260_lowlevel.c} | 19 ++---
.../boards/usb-a926x/{usb_a9263_lowlevel_init.c => usb_a9263_lowlevel.c} | 43 ++++++++---
arch/arm/configs/mmccpu_defconfig | 37 ---------
arch/arm/mach-at91/Kconfig | 37 ++++-----
arch/arm/mach-at91/Makefile | 14 +---
arch/arm/mach-at91/at91sam9260_lowlevel_init.c | 48 ------------
arch/arm/mach-at91/at91sam9261_lowlevel_init.c | 48 ------------
arch/arm/mach-at91/at91sam9263_lowlevel_init.c | 48 ------------
arch/arm/mach-at91/include/mach/at91_lowlevel_init.h | 46 -----------
.../{at91sam926x_lowlevel_init.c => include/mach/at91sam926x_board_init.h} | 148 ++++++++++++++++--------------------
62 files changed, 456 insertions(+), 969 deletions(-)
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next reply other threads:[~2018-01-06 21:05 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-06 21:04 Sam Ravnborg [this message]
2018-01-06 21:10 ` [PATCH v5 01/22] at91: mmccpu: remove board support for mmccpu Sam Ravnborg
2018-01-06 21:10 ` [PATCH v5 02/22] arm: at91: refactor lowlevel_init selection Sam Ravnborg
2018-01-06 21:10 ` [PATCH v5 03/22] arm: at91: drop unused at91sam9x5_lowlevel_init.c Sam Ravnborg
2018-01-06 21:11 ` [PATCH v5 04/22] arm: at91: add at91sam926x_board_init.h Sam Ravnborg
2018-01-06 21:11 ` [PATCH v5 05/22] arm: at91: code cleanup in at91sam926x_board_init Sam Ravnborg
2018-01-06 21:11 ` [PATCH v5 06/22] at91sam9263ek: move reset vector to board code Sam Ravnborg
2018-01-06 21:11 ` [PATCH v5 07/22] at91sam9261ek, at91sam9g10ek: " Sam Ravnborg
2018-01-06 21:11 ` [PATCH v5 08/22] pm9261: " Sam Ravnborg
2018-01-06 21:11 ` [PATCH v5 09/22] at91: drop unused at91sam9261_lowlevel_init Sam Ravnborg
2018-01-06 21:11 ` [PATCH v5 10/22] pm9263: move reset vector to board code Sam Ravnborg
2018-01-06 21:11 ` [PATCH v5 11/22] {usb,tny}-a926x: " Sam Ravnborg
2018-01-06 21:11 ` [PATCH v5 12/22] qil-a926x: " Sam Ravnborg
2018-01-06 21:11 ` [PATCH v5 13/22] haba-knx: " Sam Ravnborg
2018-01-06 21:11 ` [PATCH v5 14/22] sama5d{3, 4}{xek, xplained}: " Sam Ravnborg
2018-01-06 21:11 ` [PATCH v5 15/22] at91sam9n12ek: " Sam Ravnborg
2018-01-06 21:11 ` [PATCH v5 16/22] at91sam9260ek, at91sam9g20ek: " Sam Ravnborg
2018-01-06 21:11 ` [PATCH v5 17/22] at91sam9m10g45ek, at91sam9m10ihd, pm9g45: " Sam Ravnborg
2018-01-06 21:11 ` [PATCH v5 18/22] animeo: " Sam Ravnborg
2018-01-06 21:11 ` [PATCH v5 19/22] telit-evk-pro3: " Sam Ravnborg
2018-01-06 21:11 ` [PATCH v5 20/22] dss11: " Sam Ravnborg
2018-01-06 21:11 ` [PATCH v5 21/22] at91rm9200ek: " Sam Ravnborg
2018-01-06 21:11 ` [PATCH v5 22/22] arm: at91: remove leftovers from moving reset code in mach-at91 Sam Ravnborg
2018-01-09 10:35 ` [PATCH v5 0/22] at91: move reset vector to board code Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180106210450.GA21127@ravnborg.org \
--to=sam@ravnborg.org \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox