From: Sam Ravnborg <sam@ravnborg.org>
To: Barebox List <barebox@lists.infradead.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Subject: [PATCH v5 10/22] pm9263: move reset vector to board code
Date: Sat, 6 Jan 2018 22:11:06 +0100 [thread overview]
Message-ID: <20180106211118.24249-10-sam@ravnborg.org> (raw)
In-Reply-To: <20180106210450.GA21127@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
arch/arm/boards/pm9263/lowlevel_init.c | 43 +++++++++++++++++++++++++---------
arch/arm/mach-at91/Kconfig | 3 +--
2 files changed, 33 insertions(+), 13 deletions(-)
diff --git a/arch/arm/boards/pm9263/lowlevel_init.c b/arch/arm/boards/pm9263/lowlevel_init.c
index 6336d5106..6849f0a5b 100644
--- a/arch/arm/boards/pm9263/lowlevel_init.c
+++ b/arch/arm/boards/pm9263/lowlevel_init.c
@@ -4,22 +4,18 @@
* Under GPLv2
*/
-#include <common.h>
-#include <init.h>
-#include <mach/hardware.h>
-#include <mach/at91_rstc.h>
-#include <mach/at91_wdt.h>
-#include <mach/at91_pmc.h>
-#include <mach/at91sam9_smc.h>
-#include <mach/at91sam9_sdramc.h>
-#include <mach/at91sam9_matrix.h>
-#include <mach/at91_lowlevel_init.h>
+#include <linux/sizes.h>
+
+#include <asm/barebox-arm.h>
+
+#include <mach/at91sam926x_board_init.h>
+#include <mach/at91sam9263_matrix.h>
#define MASTER_PLL_DIV 6
#define MASTER_PLL_MUL 65
#define MAIN_PLL_DIV 2 /* 2 or 4 */
-void __bare_init at91sam926x_lowlevel_board_config(struct at91sam926x_lowlevel_cfg *cfg)
+static void __bare_init pm9263_board_config(struct at91sam926x_board_cfg *cfg)
{
/* Disable Watchdog */
cfg->wdt_mr =
@@ -119,3 +115,28 @@ void __bare_init at91sam926x_lowlevel_board_config(struct at91sam926x_lowlevel_c
AT91_RSTC_RSTTYP_WAKEUP |
AT91_RSTC_RSTTYP_WATCHDOG;
}
+
+static void __bare_init pm9263_board_init(void)
+{
+ struct at91sam926x_board_cfg cfg;
+
+ cfg.pio = IOMEM(AT91SAM9263_BASE_PIOD);
+ cfg.sdramc = IOMEM(AT91SAM9263_BASE_SDRAMC0);
+ cfg.ebi_pio_is_peripha = true;
+ cfg.matrix_csa = AT91_MATRIX_EBI0CSA;
+
+ pm9263_board_config(&cfg);
+ at91sam926x_board_init(&cfg);
+
+ barebox_arm_entry(AT91_CHIPSELECT_1, at91_get_sdram_size(cfg.sdramc),
+ NULL);
+}
+
+void __naked __bare_init barebox_arm_reset_vector(void)
+{
+ arm_cpu_lowlevel_init();
+
+ arm_setup_stack(AT91SAM9263_SRAM0_BASE + AT91SAM9263_SRAM0_SIZE - 16);
+
+ pm9263_board_init();
+}
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 242e21022..5fb17658a 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -444,8 +444,7 @@ config MACH_AT91SAM9263EK
config MACH_PM9263
bool "Ronetix PM9263"
select HAVE_AT91_BOOTSTRAP
- select AT91SAM9263_LWL
- select AT91SAM926X_LWL
+ select AT91SAM926X_BOARD_INIT
help
Say y here if you are using the Ronetix PM9263 Board
--
2.12.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2018-01-06 21:12 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-06 21:04 [PATCH v5 0/22] at91: " Sam Ravnborg
2018-01-06 21:10 ` [PATCH v5 01/22] at91: mmccpu: remove board support for mmccpu Sam Ravnborg
2018-01-06 21:10 ` [PATCH v5 02/22] arm: at91: refactor lowlevel_init selection Sam Ravnborg
2018-01-06 21:10 ` [PATCH v5 03/22] arm: at91: drop unused at91sam9x5_lowlevel_init.c Sam Ravnborg
2018-01-06 21:11 ` [PATCH v5 04/22] arm: at91: add at91sam926x_board_init.h Sam Ravnborg
2018-01-06 21:11 ` [PATCH v5 05/22] arm: at91: code cleanup in at91sam926x_board_init Sam Ravnborg
2018-01-06 21:11 ` [PATCH v5 06/22] at91sam9263ek: move reset vector to board code Sam Ravnborg
2018-01-06 21:11 ` [PATCH v5 07/22] at91sam9261ek, at91sam9g10ek: " Sam Ravnborg
2018-01-06 21:11 ` [PATCH v5 08/22] pm9261: " Sam Ravnborg
2018-01-06 21:11 ` [PATCH v5 09/22] at91: drop unused at91sam9261_lowlevel_init Sam Ravnborg
2018-01-06 21:11 ` Sam Ravnborg [this message]
2018-01-06 21:11 ` [PATCH v5 11/22] {usb,tny}-a926x: move reset vector to board code Sam Ravnborg
2018-01-06 21:11 ` [PATCH v5 12/22] qil-a926x: " Sam Ravnborg
2018-01-06 21:11 ` [PATCH v5 13/22] haba-knx: " Sam Ravnborg
2018-01-06 21:11 ` [PATCH v5 14/22] sama5d{3, 4}{xek, xplained}: " Sam Ravnborg
2018-01-06 21:11 ` [PATCH v5 15/22] at91sam9n12ek: " Sam Ravnborg
2018-01-06 21:11 ` [PATCH v5 16/22] at91sam9260ek, at91sam9g20ek: " Sam Ravnborg
2018-01-06 21:11 ` [PATCH v5 17/22] at91sam9m10g45ek, at91sam9m10ihd, pm9g45: " Sam Ravnborg
2018-01-06 21:11 ` [PATCH v5 18/22] animeo: " Sam Ravnborg
2018-01-06 21:11 ` [PATCH v5 19/22] telit-evk-pro3: " Sam Ravnborg
2018-01-06 21:11 ` [PATCH v5 20/22] dss11: " Sam Ravnborg
2018-01-06 21:11 ` [PATCH v5 21/22] at91rm9200ek: " Sam Ravnborg
2018-01-06 21:11 ` [PATCH v5 22/22] arm: at91: remove leftovers from moving reset code in mach-at91 Sam Ravnborg
2018-01-09 10:35 ` [PATCH v5 0/22] at91: move reset vector to board code Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180106211118.24249-10-sam@ravnborg.org \
--to=sam@ravnborg.org \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox