From: Sam Ravnborg <sam@ravnborg.org>
To: Barebox List <barebox@lists.infradead.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Subject: [PATCH v5 09/22] at91: drop unused at91sam9261_lowlevel_init
Date: Sat, 6 Jan 2018 22:11:05 +0100 [thread overview]
Message-ID: <20180106211118.24249-9-sam@ravnborg.org> (raw)
In-Reply-To: <20180106210450.GA21127@ravnborg.org>
All at91sam9261 based boards uses board specific
reset vectors so the mach-at91 provided version is
no longer in use.
Delete unused CONFIG symbols too.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
arch/arm/mach-at91/Kconfig | 2 --
arch/arm/mach-at91/Makefile | 1 -
arch/arm/mach-at91/at91sam9261_lowlevel_init.c | 48 --------------------------
3 files changed, 51 deletions(-)
delete mode 100644 arch/arm/mach-at91/at91sam9261_lowlevel_init.c
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index abedbf762..242e21022 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -45,8 +45,6 @@ config AT91SAM926X_LWL
# as implemented in the *lowlevel_init.c files
config AT91SAM9260_LWL
bool
-config AT91SAM9261_LWL
- bool
config AT91SAM9263_LWL
bool
config AT91SAM9G45_LWL
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 66b83000a..1c7921914 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -12,7 +12,6 @@ lwl-$(CONFIG_AT91SAM926X_LWL) += at91sam926x_lowlevel_init.o
lwl-$(CONFIG_AT91RM9200_LWL) += at91rm9200_lowlevel_init.o
lwl-$(CONFIG_AT91SAM9260_LWL) += at91sam9260_lowlevel_init.o
-lwl-$(CONFIG_AT91SAM9261_LWL) += at91sam9261_lowlevel_init.o
lwl-$(CONFIG_AT91SAM9263_LWL) += at91sam9263_lowlevel_init.o
lwl-$(CONFIG_AT91SAM9G45_LWL) += at91sam9g45_lowlevel_init.o
lwl-$(CONFIG_AT91SAM9N12_LWL) += at91sam9n12_lowlevel_init.o
diff --git a/arch/arm/mach-at91/at91sam9261_lowlevel_init.c b/arch/arm/mach-at91/at91sam9261_lowlevel_init.c
deleted file mode 100644
index 0ad7f0a0c..000000000
--- a/arch/arm/mach-at91/at91sam9261_lowlevel_init.c
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Copyright (C) 2009-2013 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * Under GPLv2
- */
-
-#define __LOWLEVEL_INIT__
-
-#include <common.h>
-#include <asm/system.h>
-#include <asm/barebox-arm.h>
-#include <asm/barebox-arm-head.h>
-#include <mach/hardware.h>
-#include <mach/at91_pmc.h>
-#include <mach/at91_pio.h>
-#include <mach/at91_rstc.h>
-#include <mach/at91_wdt.h>
-#include <mach/at91sam9_matrix.h>
-#include <mach/at91sam9_sdramc.h>
-#include <mach/at91sam9_smc.h>
-#include <mach/at91_lowlevel_init.h>
-#include <mach/io.h>
-#include <init.h>
-#include <linux/sizes.h>
-
-void __bare_init at91sam9261_lowlevel_init(void)
-{
- struct at91sam926x_lowlevel_cfg cfg;
-
- cfg.pio = IOMEM(AT91SAM9261_BASE_PIOC);
- cfg.sdramc = IOMEM(AT91SAM9261_BASE_SDRAMC);
- cfg.ebi_pio_is_peripha = false;
- cfg.matrix_csa = AT91_MATRIX_EBICSA;
-
- at91sam926x_lowlevel_init(&cfg);
-
- barebox_arm_entry(AT91_CHIPSELECT_1, at91_get_sdram_size(cfg.sdramc),
- NULL);
-}
-
-void __naked __bare_init barebox_arm_reset_vector(void)
-{
- arm_cpu_lowlevel_init();
-
- arm_setup_stack(AT91SAM9261_SRAM_BASE + AT91SAM9261_SRAM_SIZE - 16);
-
- at91sam9261_lowlevel_init();
-}
--
2.12.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2018-01-06 21:12 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-06 21:04 [PATCH v5 0/22] at91: move reset vector to board code Sam Ravnborg
2018-01-06 21:10 ` [PATCH v5 01/22] at91: mmccpu: remove board support for mmccpu Sam Ravnborg
2018-01-06 21:10 ` [PATCH v5 02/22] arm: at91: refactor lowlevel_init selection Sam Ravnborg
2018-01-06 21:10 ` [PATCH v5 03/22] arm: at91: drop unused at91sam9x5_lowlevel_init.c Sam Ravnborg
2018-01-06 21:11 ` [PATCH v5 04/22] arm: at91: add at91sam926x_board_init.h Sam Ravnborg
2018-01-06 21:11 ` [PATCH v5 05/22] arm: at91: code cleanup in at91sam926x_board_init Sam Ravnborg
2018-01-06 21:11 ` [PATCH v5 06/22] at91sam9263ek: move reset vector to board code Sam Ravnborg
2018-01-06 21:11 ` [PATCH v5 07/22] at91sam9261ek, at91sam9g10ek: " Sam Ravnborg
2018-01-06 21:11 ` [PATCH v5 08/22] pm9261: " Sam Ravnborg
2018-01-06 21:11 ` Sam Ravnborg [this message]
2018-01-06 21:11 ` [PATCH v5 10/22] pm9263: " Sam Ravnborg
2018-01-06 21:11 ` [PATCH v5 11/22] {usb,tny}-a926x: " Sam Ravnborg
2018-01-06 21:11 ` [PATCH v5 12/22] qil-a926x: " Sam Ravnborg
2018-01-06 21:11 ` [PATCH v5 13/22] haba-knx: " Sam Ravnborg
2018-01-06 21:11 ` [PATCH v5 14/22] sama5d{3, 4}{xek, xplained}: " Sam Ravnborg
2018-01-06 21:11 ` [PATCH v5 15/22] at91sam9n12ek: " Sam Ravnborg
2018-01-06 21:11 ` [PATCH v5 16/22] at91sam9260ek, at91sam9g20ek: " Sam Ravnborg
2018-01-06 21:11 ` [PATCH v5 17/22] at91sam9m10g45ek, at91sam9m10ihd, pm9g45: " Sam Ravnborg
2018-01-06 21:11 ` [PATCH v5 18/22] animeo: " Sam Ravnborg
2018-01-06 21:11 ` [PATCH v5 19/22] telit-evk-pro3: " Sam Ravnborg
2018-01-06 21:11 ` [PATCH v5 20/22] dss11: " Sam Ravnborg
2018-01-06 21:11 ` [PATCH v5 21/22] at91rm9200ek: " Sam Ravnborg
2018-01-06 21:11 ` [PATCH v5 22/22] arm: at91: remove leftovers from moving reset code in mach-at91 Sam Ravnborg
2018-01-09 10:35 ` [PATCH v5 0/22] at91: move reset vector to board code Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180106211118.24249-9-sam@ravnborg.org \
--to=sam@ravnborg.org \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox