* [PATCH 1/2] common: state: Add property to protect existing data
@ 2017-12-14 15:51 Daniel Schultz
2017-12-14 15:51 ` [PATCH 2/2] ARM: dts: AM335x: Add keep-previous-content property Daniel Schultz
` (2 more replies)
0 siblings, 3 replies; 4+ messages in thread
From: Daniel Schultz @ 2017-12-14 15:51 UTC (permalink / raw)
To: barebox
After an update to a newer barebox version with an enabled state
framework, existing data in storage memories could be overwritten.
Add a new property to check in front of every write task, if the meta
magic field only contains the magic number, zeros or ones.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
---
.../devicetree/bindings/barebox/barebox,state.rst | 3 +++
common/state/backend_bucket_direct.c | 2 ++
common/state/backend_storage.c | 1 +
common/state/state.c | 19 ++++++++++++++++++-
common/state/state.h | 2 ++
5 files changed, 26 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/barebox/barebox,state.rst b/Documentation/devicetree/bindings/barebox/barebox,state.rst
index cebb5f8..db5b041 100644
--- a/Documentation/devicetree/bindings/barebox/barebox,state.rst
+++ b/Documentation/devicetree/bindings/barebox/barebox,state.rst
@@ -55,6 +55,9 @@ Optional Properties
* ``algo``: A HMAC algorithm used to detect manipulation of the data
or header, sensible values follow this pattern ``hmac(<HASH>)``,
e.g. ``hmac(sha256)``. Only available for the ``backend-type`` ``raw``.
+* ``keep-previous-content``: Check if a the bucket meta magic field contains
+ other data than the magic value. If so, the backend will not write the state
+ to prevent unconditionally overwrites of existing data.
.. note:: For the ``backend-storage-type`` the keyword ``noncircular`` is still
supported as a fall back to an old storage format. Recommendation is to not
diff --git a/common/state/backend_bucket_direct.c b/common/state/backend_bucket_direct.c
index 958696e..9d6a337 100644
--- a/common/state/backend_bucket_direct.c
+++ b/common/state/backend_bucket_direct.c
@@ -69,6 +69,8 @@ static int state_backend_bucket_direct_read(struct state_backend_storage_bucket
if (meta.magic == direct_magic) {
read_len = meta.written_length;
} else {
+ if (meta.magic != ~0 && !!meta.magic)
+ bucket->wrong_magic = 1;
if (!IS_ENABLED(CONFIG_STATE_BACKWARD_COMPATIBLE)) {
dev_err(direct->dev, "No meta data header found\n");
dev_dbg(direct->dev, "Enable backward compatibility or increase stride size\n");
diff --git a/common/state/backend_storage.c b/common/state/backend_storage.c
index c6ebe86..f0a169d 100644
--- a/common/state/backend_storage.c
+++ b/common/state/backend_storage.c
@@ -152,6 +152,7 @@ int state_storage_read(struct state_backend_storage *storage,
* one we want to use.
*/
list_for_each_entry(bucket, &storage->buckets, bucket_list) {
+ bucket->wrong_magic = 0;
ret = bucket->read(bucket, &bucket->buf, &bucket->len);
if (ret == -EUCLEAN)
bucket->needs_refresh = 1;
diff --git a/common/state/state.c b/common/state/state.c
index 6399bd3..e110542 100644
--- a/common/state/state.c
+++ b/common/state/state.c
@@ -44,6 +44,9 @@ int state_save(struct state *state)
void *buf;
ssize_t len;
int ret;
+ struct state_backend_storage_bucket *bucket;
+ struct state_backend_storage *storage;
+ bool has_content;
if (!state->dirty)
return 0;
@@ -55,7 +58,18 @@ int state_save(struct state *state)
return ret;
}
- ret = state_storage_write(&state->storage, buf, len);
+ storage = &state->storage;
+ if (state->keep_prev_content) {
+ has_content = 0;
+ list_for_each_entry(bucket, &storage->buckets, bucket_list)
+ has_content |= bucket->wrong_magic;
+ if (has_content) {
+ dev_dbg(&state->dev, "Found content on a backend.\n");
+ goto out;
+ }
+ }
+
+ ret = state_storage_write(storage, buf, len);
if (ret) {
dev_err(&state->dev, "Failed to write packed state, %d\n", ret);
goto out;
@@ -605,6 +619,9 @@ struct state *state_new_from_node(struct device_node *node, char *path,
}
}
+ state->keep_prev_content = of_property_read_bool(node,
+ "keep-previous-content");
+
state->backend_path = xstrdup(path);
ret = of_property_read_string(node, "backend-type", &backend_type);
diff --git a/common/state/state.h b/common/state/state.h
index fcc6b9f..a411b96 100644
--- a/common/state/state.h
+++ b/common/state/state.h
@@ -46,6 +46,7 @@ struct state_backend_storage_bucket {
void *buf;
ssize_t len;
bool needs_refresh;
+ bool wrong_magic;
};
/**
@@ -105,6 +106,7 @@ struct state {
char *of_path;
const char *name;
uint32_t magic;
+ bool keep_prev_content;
struct list_head variables; /* Sorted list of variables */
unsigned int dirty;
--
2.7.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH 2/2] ARM: dts: AM335x: Add keep-previous-content property
2017-12-14 15:51 [PATCH 1/2] common: state: Add property to protect existing data Daniel Schultz
@ 2017-12-14 15:51 ` Daniel Schultz
2018-01-15 13:52 ` [PATCH 1/2] common: state: Add property to protect existing data Daniel Schultz
2018-01-17 8:58 ` Sascha Hauer
2 siblings, 0 replies; 4+ messages in thread
From: Daniel Schultz @ 2017-12-14 15:51 UTC (permalink / raw)
To: barebox
Some of our customers may have data in the EEPROM region, which we newly
have assigned as state partition. This property should prevent them of
data loses.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
---
arch/arm/dts/am335x-phytec-state.dtsi | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/dts/am335x-phytec-state.dtsi b/arch/arm/dts/am335x-phytec-state.dtsi
index fbc35b9..6bca597 100644
--- a/arch/arm/dts/am335x-phytec-state.dtsi
+++ b/arch/arm/dts/am335x-phytec-state.dtsi
@@ -23,6 +23,7 @@
backend-type = "raw";
backend = <&backend_state_eeprom>;
backend-stridesize = <40>;
+ keep-previous-content;
#address-cells = <1>;
#size-cells = <1>;
--
2.7.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH 1/2] common: state: Add property to protect existing data
2017-12-14 15:51 [PATCH 1/2] common: state: Add property to protect existing data Daniel Schultz
2017-12-14 15:51 ` [PATCH 2/2] ARM: dts: AM335x: Add keep-previous-content property Daniel Schultz
@ 2018-01-15 13:52 ` Daniel Schultz
2018-01-17 8:58 ` Sascha Hauer
2 siblings, 0 replies; 4+ messages in thread
From: Daniel Schultz @ 2018-01-15 13:52 UTC (permalink / raw)
To: barebox, Sascha Hauer
Hi,
just wanted to remind you to these patches.
Daniel
On 12/14/2017 04:51 PM, Daniel Schultz wrote:
> After an update to a newer barebox version with an enabled state
> framework, existing data in storage memories could be overwritten.
>
> Add a new property to check in front of every write task, if the meta
> magic field only contains the magic number, zeros or ones.
>
> Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
> ---
> .../devicetree/bindings/barebox/barebox,state.rst | 3 +++
> common/state/backend_bucket_direct.c | 2 ++
> common/state/backend_storage.c | 1 +
> common/state/state.c | 19 ++++++++++++++++++-
> common/state/state.h | 2 ++
> 5 files changed, 26 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/barebox/barebox,state.rst b/Documentation/devicetree/bindings/barebox/barebox,state.rst
> index cebb5f8..db5b041 100644
> --- a/Documentation/devicetree/bindings/barebox/barebox,state.rst
> +++ b/Documentation/devicetree/bindings/barebox/barebox,state.rst
> @@ -55,6 +55,9 @@ Optional Properties
> * ``algo``: A HMAC algorithm used to detect manipulation of the data
> or header, sensible values follow this pattern ``hmac(<HASH>)``,
> e.g. ``hmac(sha256)``. Only available for the ``backend-type`` ``raw``.
> +* ``keep-previous-content``: Check if a the bucket meta magic field contains
> + other data than the magic value. If so, the backend will not write the state
> + to prevent unconditionally overwrites of existing data.
>
> .. note:: For the ``backend-storage-type`` the keyword ``noncircular`` is still
> supported as a fall back to an old storage format. Recommendation is to not
> diff --git a/common/state/backend_bucket_direct.c b/common/state/backend_bucket_direct.c
> index 958696e..9d6a337 100644
> --- a/common/state/backend_bucket_direct.c
> +++ b/common/state/backend_bucket_direct.c
> @@ -69,6 +69,8 @@ static int state_backend_bucket_direct_read(struct state_backend_storage_bucket
> if (meta.magic == direct_magic) {
> read_len = meta.written_length;
> } else {
> + if (meta.magic != ~0 && !!meta.magic)
> + bucket->wrong_magic = 1;
> if (!IS_ENABLED(CONFIG_STATE_BACKWARD_COMPATIBLE)) {
> dev_err(direct->dev, "No meta data header found\n");
> dev_dbg(direct->dev, "Enable backward compatibility or increase stride size\n");
> diff --git a/common/state/backend_storage.c b/common/state/backend_storage.c
> index c6ebe86..f0a169d 100644
> --- a/common/state/backend_storage.c
> +++ b/common/state/backend_storage.c
> @@ -152,6 +152,7 @@ int state_storage_read(struct state_backend_storage *storage,
> * one we want to use.
> */
> list_for_each_entry(bucket, &storage->buckets, bucket_list) {
> + bucket->wrong_magic = 0;
> ret = bucket->read(bucket, &bucket->buf, &bucket->len);
> if (ret == -EUCLEAN)
> bucket->needs_refresh = 1;
> diff --git a/common/state/state.c b/common/state/state.c
> index 6399bd3..e110542 100644
> --- a/common/state/state.c
> +++ b/common/state/state.c
> @@ -44,6 +44,9 @@ int state_save(struct state *state)
> void *buf;
> ssize_t len;
> int ret;
> + struct state_backend_storage_bucket *bucket;
> + struct state_backend_storage *storage;
> + bool has_content;
>
> if (!state->dirty)
> return 0;
> @@ -55,7 +58,18 @@ int state_save(struct state *state)
> return ret;
> }
>
> - ret = state_storage_write(&state->storage, buf, len);
> + storage = &state->storage;
> + if (state->keep_prev_content) {
> + has_content = 0;
> + list_for_each_entry(bucket, &storage->buckets, bucket_list)
> + has_content |= bucket->wrong_magic;
> + if (has_content) {
> + dev_dbg(&state->dev, "Found content on a backend.\n");
> + goto out;
> + }
> + }
> +
> + ret = state_storage_write(storage, buf, len);
> if (ret) {
> dev_err(&state->dev, "Failed to write packed state, %d\n", ret);
> goto out;
> @@ -605,6 +619,9 @@ struct state *state_new_from_node(struct device_node *node, char *path,
> }
> }
>
> + state->keep_prev_content = of_property_read_bool(node,
> + "keep-previous-content");
> +
> state->backend_path = xstrdup(path);
>
> ret = of_property_read_string(node, "backend-type", &backend_type);
> diff --git a/common/state/state.h b/common/state/state.h
> index fcc6b9f..a411b96 100644
> --- a/common/state/state.h
> +++ b/common/state/state.h
> @@ -46,6 +46,7 @@ struct state_backend_storage_bucket {
> void *buf;
> ssize_t len;
> bool needs_refresh;
> + bool wrong_magic;
> };
>
> /**
> @@ -105,6 +106,7 @@ struct state {
> char *of_path;
> const char *name;
> uint32_t magic;
> + bool keep_prev_content;
>
> struct list_head variables; /* Sorted list of variables */
> unsigned int dirty;
--
Mit freundlichen Grüßen,
With best regards,
Daniel Schultz
- Entwicklung -
Tel.: +49 6131 92 21 457
d.schultz@phytec.de
www.phytec.de
Sie finden uns auch auf: Facebook, LinkedIn, Xing, YouTube
PHYTEC Messtechnik GmbH | Robert-Koch-Str. 39 | 55129 Mainz, Germany
Geschäftsführer: Dipl.-Ing. Michael Mitezki, Dipl.-Ing. Bodo Huber |
Handelsregister Mainz HRB 4656 | Finanzamt Mainz-Mitte | St.Nr. 266500608,
DE 149059855
This E-Mail may contain confidential or privileged information. If you are
not the intended recipient (or have received this E-Mail in error) please
notify the sender immediately and destroy this E-Mail. Any unauthorized
copying, disclosure or distribution of the material in this E-Mail is
strictly forbidden.
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH 1/2] common: state: Add property to protect existing data
2017-12-14 15:51 [PATCH 1/2] common: state: Add property to protect existing data Daniel Schultz
2017-12-14 15:51 ` [PATCH 2/2] ARM: dts: AM335x: Add keep-previous-content property Daniel Schultz
2018-01-15 13:52 ` [PATCH 1/2] common: state: Add property to protect existing data Daniel Schultz
@ 2018-01-17 8:58 ` Sascha Hauer
2 siblings, 0 replies; 4+ messages in thread
From: Sascha Hauer @ 2018-01-17 8:58 UTC (permalink / raw)
To: Daniel Schultz; +Cc: barebox
Sorry for replying only after reminding me. This patch is still
in my inbox as I have some problems with it. Anyway let's solve
them.
On Thu, Dec 14, 2017 at 04:51:36PM +0100, Daniel Schultz wrote:
> After an update to a newer barebox version with an enabled state
> framework, existing data in storage memories could be overwritten.
>
> Add a new property to check in front of every write task, if the meta
> magic field only contains the magic number, zeros or ones.
What is the case you are trying to protect against? I assume partition
size changes and possibly old bootloaders with an old partitioning.
Could you explain?
Whatever solution we come up with should work for the circular backend
aswell.
What I am missing in this patch is a clear way how to overcome this
situation. For mtd it would be: erase the device and reset, but what
about devices that don't have to be erased? We might just need a -f aka
"I know what I am doing" parameter.
>
> Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
> ---
> .../devicetree/bindings/barebox/barebox,state.rst | 3 +++
> common/state/backend_bucket_direct.c | 2 ++
> common/state/backend_storage.c | 1 +
> common/state/state.c | 19 ++++++++++++++++++-
> common/state/state.h | 2 ++
> 5 files changed, 26 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/barebox/barebox,state.rst b/Documentation/devicetree/bindings/barebox/barebox,state.rst
> index cebb5f8..db5b041 100644
> --- a/Documentation/devicetree/bindings/barebox/barebox,state.rst
> +++ b/Documentation/devicetree/bindings/barebox/barebox,state.rst
> @@ -55,6 +55,9 @@ Optional Properties
> * ``algo``: A HMAC algorithm used to detect manipulation of the data
> or header, sensible values follow this pattern ``hmac(<HASH>)``,
> e.g. ``hmac(sha256)``. Only available for the ``backend-type`` ``raw``.
> +* ``keep-previous-content``: Check if a the bucket meta magic field contains
> + other data than the magic value. If so, the backend will not write the state
> + to prevent unconditionally overwrites of existing data.
>
> .. note:: For the ``backend-storage-type`` the keyword ``noncircular`` is still
> supported as a fall back to an old storage format. Recommendation is to not
> diff --git a/common/state/backend_bucket_direct.c b/common/state/backend_bucket_direct.c
> index 958696e..9d6a337 100644
> --- a/common/state/backend_bucket_direct.c
> +++ b/common/state/backend_bucket_direct.c
> @@ -69,6 +69,8 @@ static int state_backend_bucket_direct_read(struct state_backend_storage_bucket
> if (meta.magic == direct_magic) {
> read_len = meta.written_length;
> } else {
> + if (meta.magic != ~0 && !!meta.magic)
> + bucket->wrong_magic = 1;
This only handles the direct backend, but not the circular backend.
> if (!IS_ENABLED(CONFIG_STATE_BACKWARD_COMPATIBLE)) {
> dev_err(direct->dev, "No meta data header found\n");
> dev_dbg(direct->dev, "Enable backward compatibility or increase stride size\n");
> diff --git a/common/state/backend_storage.c b/common/state/backend_storage.c
> index c6ebe86..f0a169d 100644
> --- a/common/state/backend_storage.c
> +++ b/common/state/backend_storage.c
> @@ -152,6 +152,7 @@ int state_storage_read(struct state_backend_storage *storage,
> * one we want to use.
> */
> list_for_each_entry(bucket, &storage->buckets, bucket_list) {
> + bucket->wrong_magic = 0;
> ret = bucket->read(bucket, &bucket->buf, &bucket->len);
> if (ret == -EUCLEAN)
> bucket->needs_refresh = 1;
> diff --git a/common/state/state.c b/common/state/state.c
> index 6399bd3..e110542 100644
> --- a/common/state/state.c
> +++ b/common/state/state.c
> @@ -44,6 +44,9 @@ int state_save(struct state *state)
> void *buf;
> ssize_t len;
> int ret;
> + struct state_backend_storage_bucket *bucket;
> + struct state_backend_storage *storage;
> + bool has_content;
>
> if (!state->dirty)
> return 0;
> @@ -55,7 +58,18 @@ int state_save(struct state *state)
> return ret;
> }
>
> - ret = state_storage_write(&state->storage, buf, len);
> + storage = &state->storage;
> + if (state->keep_prev_content) {
> + has_content = 0;
has_content is only used in this if(){}, can you move its declaration
here?
> + list_for_each_entry(bucket, &storage->buckets, bucket_list)
> + has_content |= bucket->wrong_magic;
> + if (has_content) {
> + dev_dbg(&state->dev, "Found content on a backend.\n");
I think dev_dbg() is a bit quiet. This really deserves a warning saying
"Found foreign content on backend, won't overwrite.\n"
> + goto out;
You should initialize 'ret' with some error value before not saving the
state.
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2018-01-17 8:58 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-12-14 15:51 [PATCH 1/2] common: state: Add property to protect existing data Daniel Schultz
2017-12-14 15:51 ` [PATCH 2/2] ARM: dts: AM335x: Add keep-previous-content property Daniel Schultz
2018-01-15 13:52 ` [PATCH 1/2] common: state: Add property to protect existing data Daniel Schultz
2018-01-17 8:58 ` Sascha Hauer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox