From: Sascha Hauer <s.hauer@pengutronix.de>
To: Sam Ravnborg <sam@ravnborg.org>
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>,
Barebox List <barebox@lists.infradead.org>
Subject: Re: [PATCH v3 0/3] Enable DT support for AT91SAM9263EK
Date: Wed, 17 Jan 2018 11:07:37 +0100 [thread overview]
Message-ID: <20180117100737.bxtbjuojetes7dsf@pengutronix.de> (raw)
In-Reply-To: <20180115213951.GA32669@ravnborg.org>
On Mon, Jan 15, 2018 at 10:39:51PM +0100, Sam Ravnborg wrote:
> This is version 3 of a patchset to enable
> device tree support for AT91SAM9263EK.
>
> The patchset is made on top of previous
> patches posted that move reset code to
> the board files for at91 boards.
> (Which are already part of -next)
>
> On the quest towards getting so far several drivers was
> converted to support DT.
> These patches went in around august.
>
> There was also issues with mach-at91 calling code
> in the board directory (dependency in the
> wrong direction).
> This was fixed in "at91: move reset .." which is
> pending (already posted).
>
> I have failed to get the bootstrap mode to work.
> It stops somewhere - and I have not invested enough
> time to figure out where and why things goes wrong.
> bootstrap mode was also broken before these patches.
> No JTAG debugger available to help me.
> And then I have at91bootstrap that works so motivation
> was not too high.
>
> I do not think the NAND support works either.
> The device tree introduces some nand-controller
> stuff that is not supported by barebox (at least I assume so).
> And this part I did not look further into.
>
> Next step is to get a proprietary board up and
> running (which uses NOR flash).
> But I wanted this patchset out in the open first.
>
> Thanks for feedback so far - especially from Andrey.
>
> Sam
>
> v2 => v3
> - Squashed commit introducing support for multi image
> with the commit to add DT support
> - Fixed init of smc
Applied, thanks
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
prev parent reply other threads:[~2018-01-17 10:07 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-15 21:39 Sam Ravnborg
2018-01-15 21:41 ` [PATCH v3 1/3] arm: at91: move irq_fixup to header file Sam Ravnborg
2018-01-15 21:41 ` [PATCH v3 2/3] arm: at91: simplify soc setup Sam Ravnborg
2018-01-15 21:41 ` [PATCH v3 3/3] at91sam9263ek: enable DT support Sam Ravnborg
2018-01-17 10:07 ` Sascha Hauer [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180117100737.bxtbjuojetes7dsf@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=andrew.smirnov@gmail.com \
--cc=barebox@lists.infradead.org \
--cc=sam@ravnborg.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox