From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:67c:670:201:290:27ff:fe1d:cc33]) by bombadil.infradead.org with esmtps (Exim 4.89 #1 (Red Hat Linux)) id 1eebiM-0002K1-9D for barebox@lists.infradead.org; Thu, 25 Jan 2018 07:12:52 +0000 Date: Thu, 25 Jan 2018 08:12:36 +0100 From: Sascha Hauer Message-ID: <20180125071236.q7ce2jwqnhrngmm6@pengutronix.de> References: <20180122095918.11721-1-antonynpavlov@gmail.com> <20180122095918.11721-4-antonynpavlov@gmail.com> MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: <20180122095918.11721-4-antonynpavlov@gmail.com> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: [PATCH v3 3/3] sandbox: add i2c and spi libftdi1 bit-bang example To: Antony Pavlov Cc: barebox@lists.infradead.org On Mon, Jan 22, 2018 at 12:59:18PM +0300, Antony Pavlov wrote: > Make necessary changes in sandbox_defconfig: > enable gpio, spi, i2c and led stuff. > > Usage: > > barebox$ make sandbox_defconfig > barebox$ sed -i "s/# CONFIG_GPIO_LIBFTDI1.*$/CONFIG_GPIO_LIBFTDI1=y/" .config > > # edit arch/sandbox/dts/sandbox-libftdi-example.dtsi > > barebox$ echo '#include "sandbox-libftdi-example.dtsi"' >> arch/sandbox/dts/sandbox.dts > barebox$ make > barebox$ sudo ./barebox -d arch/sandbox/dts/sandbox.dtb > > Signed-off-by: Antony Pavlov > --- > arch/sandbox/configs/sandbox_defconfig | 21 ++++++- > arch/sandbox/dts/sandbox-libftdi-example.dtsi | 80 +++++++++++++++++++++++++++ > 2 files changed, 100 insertions(+), 1 deletion(-) > > +++ b/arch/sandbox/dts/sandbox-libftdi-example.dtsi > @@ -0,0 +1,80 @@ > +#include > + > +/ { > + gpio0: gpio@0 { > + compatible = "barebox,libftdi1-gpio"; > + usb,id_vendor = <0x0403>; > + usb,id_product = <0x6010>; > + > + /* > + * The serial number can be used to select > + * a specific device in case more than > + * one is connected to the host. > + */ > + /* usb,i_serial_number = "20180120"; */ > + > + /* use ACBUS[7:0] */ > + gpio-controller; > + #gpio-cells = <2>; > + > + status = "okay"; > + }; > + > + spi0: spi0 { > + compatible = "spi-gpio"; > + #address-cells = <1>; > + #size-cells = <0>; > + > + gpio-sck = <&gpio0 0 GPIO_ACTIVE_HIGH>; > + gpio-mosi = <&gpio0 1 GPIO_ACTIVE_HIGH>; > + gpio-miso = <&gpio0 2 GPIO_ACTIVE_HIGH>; > + cs-gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>; > + > + num-chipselects = <1>; > + > + status = "disabled"; Given that this is an example which is not used unless you include it manually I think you can remove the status properties. Otherwise this series looks fine to me. I can remove the properties while applying if you like. Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox