mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Aleksander Morgado <aleksander@aleksander.es>
To: barebox@lists.infradead.org
Cc: Aleksander Morgado <aleksander@aleksander.es>
Subject: [RFC PATCH v2 2/8] ratp: moved logic to its own subdirectory
Date: Thu,  8 Feb 2018 14:22:55 +0100	[thread overview]
Message-ID: <20180208132301.24921-3-aleksander@aleksander.es> (raw)
In-Reply-To: <20180208132301.24921-1-aleksander@aleksander.es>

We are going to add new RATP command implementations in separate files
within this subdirectory.

Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
---
 common/Kconfig           | 13 +------------
 common/Makefile          |  4 ++--
 common/ratp/Kconfig      | 14 ++++++++++++++
 common/ratp/Makefile     |  1 +
 common/{ => ratp}/ratp.c |  0
 5 files changed, 18 insertions(+), 14 deletions(-)
 create mode 100644 common/ratp/Kconfig
 create mode 100644 common/ratp/Makefile
 rename common/{ => ratp}/ratp.c (100%)

diff --git a/common/Kconfig b/common/Kconfig
index 57418cadc..a96c6ef20 100644
--- a/common/Kconfig
+++ b/common/Kconfig
@@ -755,18 +755,7 @@ config PBL_CONSOLE
 	  must be running at the address it's linked at and bss must
 	  be cleared. On ARM that would be after setup_c().

-config CONSOLE_RATP
-	bool
-	select RATP
-	select CRC16
-	select POLLER
-	depends on CONSOLE_FULL
-	prompt "RATP console support"
-	help
-	  This option adds support for remote controlling barebox via serial
-	  port. The regular console is designed for human interaction whereas
-	  this option adds a machine readable interface for controlling barebox.
-	  Say yes here if you want to control barebox from a remote host.
+source common/ratp/Kconfig

 config PARTITION
 	bool
diff --git a/common/Makefile b/common/Makefile
index 8cd0ab300..90d5f19ec 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -46,7 +46,8 @@ obj-$(CONFIG_RESET_SOURCE)	+= reset_source.o
 obj-$(CONFIG_SHELL_HUSH)	+= hush.o
 obj-$(CONFIG_SHELL_SIMPLE)	+= parser.o
 obj-$(CONFIG_STATE)		+= state/
-obj-$(CONFIG_RATP)		+= ratp.o
+obj-$(CONFIG_RATP)		+= ratp/
+obj-$(CONFIG_CONSOLE_RATP)	+= ratp/
 obj-$(CONFIG_BOOTCHOOSER)	+= bootchooser.o
 obj-$(CONFIG_UIMAGE)		+= image.o uimage.o
 obj-$(CONFIG_FITIMAGE)		+= image-fit.o
@@ -60,7 +61,6 @@ obj-$(CONFIG_FILE_LIST)		+= file-list.o
 obj-$(CONFIG_FIRMWARE)		+= firmware.o
 obj-$(CONFIG_UBIFORMAT)		+= ubiformat.o
 obj-$(CONFIG_BAREBOX_UPDATE_IMX_NAND_FCB) += imx-bbu-nand-fcb.o
-obj-$(CONFIG_CONSOLE_RATP)	+= ratp.o
 obj-$(CONFIG_BOOT)		+= boot.o

 quiet_cmd_pwd_h = PWDH    $@
diff --git a/common/ratp/Kconfig b/common/ratp/Kconfig
new file mode 100644
index 000000000..93ff75d64
--- /dev/null
+++ b/common/ratp/Kconfig
@@ -0,0 +1,14 @@
+
+config CONSOLE_RATP
+	bool
+	select RATP
+	select CRC16
+	select POLLER
+	depends on CONSOLE_FULL
+	prompt "RATP console support"
+	help
+	  This option adds support for remote controlling barebox via serial
+	  port. The regular console is designed for human interaction whereas
+	  this option adds a machine readable interface for controlling barebox.
+	  Say yes here if you want to control barebox from a remote host.
+
diff --git a/common/ratp/Makefile b/common/ratp/Makefile
new file mode 100644
index 000000000..cab14c6fb
--- /dev/null
+++ b/common/ratp/Makefile
@@ -0,0 +1 @@
+obj-y += ratp.o
diff --git a/common/ratp.c b/common/ratp/ratp.c
similarity index 100%
rename from common/ratp.c
rename to common/ratp/ratp.c
--
2.15.1

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2018-02-08 13:23 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-02-08 13:22 [RFC PATCH v2 0/8] ratp: new generic RATP command support Aleksander Morgado
2018-02-08 13:22 ` [RFC PATCH v2 1/8] ratp: implement generic " Aleksander Morgado
2018-02-08 13:22 ` Aleksander Morgado [this message]
2018-02-08 13:22 ` [RFC PATCH v2 3/8] ratp: allow building without full console support Aleksander Morgado
2018-02-08 13:22 ` [RFC PATCH v2 4/8] ratp: implement ping as a standard ratp command Aleksander Morgado
2018-02-08 13:22 ` [RFC PATCH v2 5/8] ratp: implement getenv " Aleksander Morgado
2018-02-08 13:22 ` [RFC PATCH v2 6/8] ratp: use xstrndup() instead of a custom xmemdup_add_zero() Aleksander Morgado
2018-02-08 13:23 ` [RFC PATCH v2 7/8] ratp: new md and mw commands Aleksander Morgado
2018-02-13  7:55   ` Sascha Hauer
2018-02-21 13:10     ` Aleksander Morgado
2018-02-22  7:59       ` Sascha Hauer
2018-02-08 13:23 ` [RFC PATCH v2 8/8] ratp: new reset command Aleksander Morgado

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180208132301.24921-3-aleksander@aleksander.es \
    --to=aleksander@aleksander.es \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox