From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:67c:670:201:290:27ff:fe1d:cc33]) by bombadil.infradead.org with esmtps (Exim 4.89 #1 (Red Hat Linux)) id 1eqyRX-00037U-0w for barebox@lists.infradead.org; Wed, 28 Feb 2018 09:54:39 +0000 Received: from dude.hi.pengutronix.de ([2001:67c:670:100:1d::7]) by metis.ext.pengutronix.de with esmtps (TLS1.2:ECDHE_RSA_AES_256_GCM_SHA384:256) (Exim 4.89) (envelope-from ) id 1eqyRL-0005x7-Ey for barebox@lists.infradead.org; Wed, 28 Feb 2018 10:54:23 +0100 Received: from mgr by dude.hi.pengutronix.de with local (Exim 4.90_1) (envelope-from ) id 1eqyRL-0007lX-7A for barebox@lists.infradead.org; Wed, 28 Feb 2018 10:54:23 +0100 From: Michael Grzeschik Date: Wed, 28 Feb 2018 10:54:20 +0100 Message-Id: <20180228095420.29662-1-m.grzeschik@pengutronix.de> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: [PATCH] boards: samx6: add initial support for kontron samx6i To: barebox@lists.infradead.org Signed-off-by: Michael Grzeschik --- arch/arm/boards/Makefile | 1 + arch/arm/boards/kontron-samx6i/Makefile | 2 + arch/arm/boards/kontron-samx6i/board.c | 134 ++++++ .../flash-header-samx6i-duallite.imxcfg | 111 +++++ .../kontron-samx6i/flash-header-samx6i-quad.imxcfg | 127 ++++++ arch/arm/boards/kontron-samx6i/lowlevel.c | 78 ++++ arch/arm/configs/imx_v7_defconfig | 1 + arch/arm/dts/Makefile | 2 + arch/arm/dts/imx6dl-samx6i.dts | 21 + arch/arm/dts/imx6q-samx6i.dts | 21 + arch/arm/dts/imx6qdl-samx6i.dtsi | 137 ++++++ arch/arm/dts/imx6qdl-smarc-samx6i.dtsi | 470 +++++++++++++++++++++ arch/arm/mach-imx/Kconfig | 4 + images/Makefile.imx | 30 ++ 14 files changed, 1139 insertions(+) create mode 100644 arch/arm/boards/kontron-samx6i/Makefile create mode 100644 arch/arm/boards/kontron-samx6i/board.c create mode 100644 arch/arm/boards/kontron-samx6i/flash-header-samx6i-duallite.imxcfg create mode 100644 arch/arm/boards/kontron-samx6i/flash-header-samx6i-quad.imxcfg create mode 100644 arch/arm/boards/kontron-samx6i/lowlevel.c create mode 100644 arch/arm/dts/imx6dl-samx6i.dts create mode 100644 arch/arm/dts/imx6q-samx6i.dts create mode 100644 arch/arm/dts/imx6qdl-samx6i.dtsi create mode 100644 arch/arm/dts/imx6qdl-smarc-samx6i.dtsi diff --git a/arch/arm/boards/Makefile b/arch/arm/boards/Makefile index ca187ccb89..30f4c299f1 100644 --- a/arch/arm/boards/Makefile +++ b/arch/arm/boards/Makefile @@ -61,6 +61,7 @@ obj-$(CONFIG_MACH_IMX21ADS) += freescale-mx21-ads/ obj-$(CONFIG_MACH_IMX233_OLINUXINO) += imx233-olinuxino/ obj-$(CONFIG_MACH_IMX27ADS) += freescale-mx27-ads/ obj-$(CONFIG_MACH_KINDLE3) += kindle3/ +obj-$(CONFIG_MACH_KONTRON_SAMX6I) += kontron-samx6i/ obj-$(CONFIG_MACH_LENOVO_IX4_300D) += lenovo-ix4-300d/ obj-$(CONFIG_MACH_LUBBOCK) += lubbock/ obj-$(CONFIG_MACH_MAINSTONE) += mainstone/ diff --git a/arch/arm/boards/kontron-samx6i/Makefile b/arch/arm/boards/kontron-samx6i/Makefile new file mode 100644 index 0000000000..01c7a259e9 --- /dev/null +++ b/arch/arm/boards/kontron-samx6i/Makefile @@ -0,0 +1,2 @@ +obj-y += board.o +lwl-y += lowlevel.o diff --git a/arch/arm/boards/kontron-samx6i/board.c b/arch/arm/boards/kontron-samx6i/board.c new file mode 100644 index 0000000000..a6e2fc3c35 --- /dev/null +++ b/arch/arm/boards/kontron-samx6i/board.c @@ -0,0 +1,134 @@ +/* + * Copyright (C) 2017 Michael Grzeschik, Pengutronix + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation. + * + */ + +#define pr_fmt(fmt) "samx6i: " fmt + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include + +#define PCBVERSION_PIN IMX_GPIO_NR(2, 2) +#define PCBID0_PIN IMX_GPIO_NR(6, 7) +#define PCBID1_PIN IMX_GPIO_NR(6, 9) + +#define SZ_4G 0xEFFFFFF8 + +static int samx6i_mem_init(void) +{ + int ver, id0, id1; + resource_size_t size = 0; + + ver = gpio_get_value(PCBVERSION_PIN); + id0 = gpio_get_value(PCBID0_PIN); + id1 = gpio_get_value(PCBID1_PIN); + + if (of_machine_is_compatible("kontron,imx6q-samx6i")) { + if (ver) + size = SZ_1G; + else if (id0 && id1) + size = SZ_4G; + else if (id0) + size = SZ_2G; + else if (id1) + size = SZ_1G; + else + size = SZ_512M; + } else if (of_machine_is_compatible("kontron,imx6dl-samx6i")) { + if (ver) + size = SZ_512M; + if (id0 && id1) + size = SZ_2G; + else if (id0) + size = SZ_1G; + else if (id1) + size = SZ_512M; + else + size = SZ_128M; + } + + if (size) + arm_add_mem_device("ram0", 0x10000000, size); + + return 0; +} +mem_initcall(samx6i_mem_init); + +static int samx6i_devices_init(void) +{ + int ret; + char *environment_path, *default_environment_path; + char *envdev, *default_envdev; + + if (!(of_machine_is_compatible("kontron,imx6q-samx6i") || + of_machine_is_compatible("kontron,imx6dl-samx6i"))) + return 0; + + barebox_set_hostname("samx6ii"); + default_environment_path = "/chosen/environment-spinor"; + default_envdev = "SPI NOR flash"; + + switch (bootsource_get()) { + case BOOTSOURCE_MMC: + environment_path = basprintf("/chosen/environment-sd%d", + bootsource_get_instance() + 1); + envdev = "MMC"; + break; + case BOOTSOURCE_SPI: + environment_path = basprintf("/chosen/environment-spinor"); + envdev = "SPI NOR flash"; + break; + default: + environment_path = basprintf(default_environment_path); + envdev = default_envdev; + break; + } + + if (environment_path) { + ret = of_device_enable_path(environment_path); + if (ret < 0) + pr_warn("Failed to enable environment partition '%s' (%d)\n", + environment_path, ret); + free(environment_path); + } + + pr_notice("Using environment in %s\n", envdev); + + imx6_bbu_internal_spi_i2c_register_handler("m25p80", + "/dev/m25p0.bootloader", + BBU_HANDLER_FLAG_DEFAULT); + + imx6_bbu_internal_mmc_register_handler("mmc3", + "/dev/mmc3.bootloader", + BBU_HANDLER_FLAG_DEFAULT); + + return 0; +} +device_initcall(samx6i_devices_init); diff --git a/arch/arm/boards/kontron-samx6i/flash-header-samx6i-duallite.imxcfg b/arch/arm/boards/kontron-samx6i/flash-header-samx6i-duallite.imxcfg new file mode 100644 index 0000000000..761716dd4d --- /dev/null +++ b/arch/arm/boards/kontron-samx6i/flash-header-samx6i-duallite.imxcfg @@ -0,0 +1,111 @@ +soc imx6 +loadaddr 0x10000000 +dcdofs 0x400 + +wm 32 0x020e0774 0x000c0000 +wm 32 0x020e0754 0x00000000 + +wm 32 0x020e04ac 0x00000030 +wm 32 0x020e04b0 0x00000030 + +wm 32 0x020e0464 0x00000030 +wm 32 0x020e0490 0x00000030 +wm 32 0x020e074c 0x00000030 + +wm 32 0x020e0494 0x000c0030 +wm 32 0x020e04a4 0x00003000 +wm 32 0x020e04a8 0x00003000 +wm 32 0x020e04a0 0x00000000 +wm 32 0x020e04b4 0x00003030 +wm 32 0x020e04b8 0x00003030 +wm 32 0x020e076c 0x00000030 + +wm 32 0x020e0750 0x00020000 +wm 32 0x020e04bc 0x00000038 +wm 32 0x020e04c0 0x00000038 +wm 32 0x020e04c4 0x00000038 +wm 32 0x020e04c8 0x00000038 +wm 32 0x020e04cc 0x00000038 +wm 32 0x020e04d0 0x00000038 +wm 32 0x020e04d4 0x00000038 +wm 32 0x020e04d8 0x00000038 + +wm 32 0x020e0760 0x00020000 +wm 32 0x020e0764 0x00000030 +wm 32 0x020e0770 0x00000030 +wm 32 0x020e0778 0x00000030 +wm 32 0x020e077c 0x00000030 +wm 32 0x020e0780 0x00000030 +wm 32 0x020e0784 0x00000030 +wm 32 0x020e078c 0x00000030 +wm 32 0x020e0748 0x00000030 + +wm 32 0x020e0470 0x00000030 +wm 32 0x020e0474 0x00000030 +wm 32 0x020e0478 0x00000030 +wm 32 0x020e047c 0x00000030 +wm 32 0x020e0480 0x00000030 +wm 32 0x020e0484 0x00000030 +wm 32 0x020e0488 0x00000030 +wm 32 0x020e048c 0x000C0030 + +wm 32 0x021b0800 0xa1390003 +wm 32 0x021b4800 0xa1390003 + +wm 32 0x021b080c 0x0040003c +wm 32 0x021b0810 0x0032003e + +wm 32 0x021b083c 0x42350231 +wm 32 0x021b0840 0x021a0218 +wm 32 0x021b0848 0x4b4b4e49 +wm 32 0x021b0850 0x3f3f3035 + +wm 32 0x021b081c 0x33333333 +wm 32 0x021b0820 0x33333333 +wm 32 0x021b0824 0x33333333 +wm 32 0x021b0828 0x33333333 +wm 32 0x021b481c 0x33333333 +wm 32 0x021b4820 0x33333333 +wm 32 0x021b4824 0x33333333 +wm 32 0x021b4828 0x33333333 + + +wm 32 0x021b08b8 0x00000800 +wm 32 0x021b48b8 0x00000800 + +wm 32 0x021b0004 0x0002002d +wm 32 0x021b0008 0x00333030 +wm 32 0x021b000c 0x696d5323 +wm 32 0x021b0010 0xb66e8c63 +wm 32 0x021b0014 0x01ff00db +wm 32 0x021b0018 0x00001740 +wm 32 0x021b001c 0x00008000 +wm 32 0x021b002c 0x000026d2 +wm 32 0x021b0030 0x006d0e21 +wm 32 0x021b0040 0x00000027 +wm 32 0x021b0000 0x84190000 +wm 32 0x021b001c 0x04008032 +wm 32 0x021b001c 0x00008033 +wm 32 0x021b001c 0x00048031 +wm 32 0x021b001c 0x07208030 +wm 32 0x021b001c 0x04008040 +wm 32 0x021b0020 0x00005800 +wm 32 0x021b0818 0x00022227 +wm 32 0x021b4818 0x00022227 +wm 32 0x021b0004 0x0002556d +wm 32 0x021b4004 0x00011006 +wm 32 0x021b001c 0x00000000 + +/* set the default clock gate to save power */ +wm 32 0x020c4068 0x00C03F3F +wm 32 0x020c406c 0x0030FC03 +wm 32 0x020c4070 0x0FFFC000 +wm 32 0x020c4074 0x3FF00000 +wm 32 0x020c4078 0x00FFF300 +wm 32 0x020c407c 0x0F0000C3 +wm 32 0x020c4080 0x000003FF + +wm 32 0x020e0010 0xf00000ff + +wm 32 0x020e0018 0x00070007 +wm 32 0x020e001c 0x00070007 diff --git a/arch/arm/boards/kontron-samx6i/flash-header-samx6i-quad.imxcfg b/arch/arm/boards/kontron-samx6i/flash-header-samx6i-quad.imxcfg new file mode 100644 index 0000000000..80dadfcac5 --- /dev/null +++ b/arch/arm/boards/kontron-samx6i/flash-header-samx6i-quad.imxcfg @@ -0,0 +1,127 @@ +soc imx6 +loadaddr 0x10000000 +dcdofs 0x400 + +wm 32 0x020e05a8 0x00000030 +wm 32 0x020e05b0 0x00000030 +wm 32 0x020e0524 0x00000030 +wm 32 0x020e051c 0x00000030 + +wm 32 0x020e0518 0x00000030 +wm 32 0x020e050c 0x00000030 +wm 32 0x020e05b8 0x00000030 +wm 32 0x020e05c0 0x00000030 + +wm 32 0x020e05ac 0x00020030 +wm 32 0x020e05b4 0x00020030 +wm 32 0x020e0528 0x00020030 +wm 32 0x020e0520 0x00020030 + +wm 32 0x020e0514 0x00020030 +wm 32 0x020e0510 0x00020030 +wm 32 0x020e05bc 0x00020030 +wm 32 0x020e05c4 0x00020030 + +wm 32 0x020e056c 0x00020030 +wm 32 0x020e0578 0x00020030 +wm 32 0x020e0588 0x00020030 +wm 32 0x020e0594 0x00020030 + +wm 32 0x020e057c 0x00020030 +wm 32 0x020e0590 0x00003000 +wm 32 0x020e0598 0x00003000 +wm 32 0x020e058c 0x00000000 + +wm 32 0x020e059c 0x00003030 +wm 32 0x020e05a0 0x00003030 +wm 32 0x020e0784 0x00000030 +wm 32 0x020e0788 0x00000030 + +wm 32 0x020e0794 0x00000030 +wm 32 0x020e079c 0x00000030 +wm 32 0x020e07a0 0x00000030 +wm 32 0x020e07a4 0x00000030 + +wm 32 0x020e07a8 0x00000030 +wm 32 0x020e0748 0x00000030 +wm 32 0x020e074c 0x00000030 +wm 32 0x020e0750 0x00020000 + +wm 32 0x020e0758 0x00000000 +wm 32 0x020e0774 0x00020000 +wm 32 0x020e078c 0x00000030 +wm 32 0x020e0798 0x000C0000 + +wm 32 0x021b081c 0x33333333 +wm 32 0x021b0820 0x33333333 +wm 32 0x021b0824 0x33333333 +wm 32 0x021b0828 0x33333333 + +wm 32 0x021b481c 0x33333333 +wm 32 0x021b4820 0x33333333 +wm 32 0x021b4824 0x33333333 +wm 32 0x021b4828 0x33333333 + +wm 32 0x021b0018 0x00081740 + +wm 32 0x021b001c 0x00008000 +wm 32 0x021b000c 0x898E7975 +wm 32 0x021b0010 0xFF538E64 +wm 32 0x021b0014 0x01FF00DD +wm 32 0x021b002c 0x000026D2 + +wm 32 0x021b0030 0x005B0E21 +wm 32 0x021b0008 0x09444040 +wm 32 0x021b0004 0x00025576 +/* CS0_END = 4GB */ +wm 32 0x021b0040 0x0000007F + +wm 32 0x021b0000 0x841A0000 + +wm 32 0x021b001c 0x04088032 +wm 32 0x021b001c 0x00008033 +wm 32 0x021b001c 0x00428031 +wm 32 0x021b001c 0x09408030 + +wm 32 0x021b001c 0x04008040 +wm 32 0x021b0800 0xA1390003 +wm 32 0x021b4800 0xA1390003 +wm 32 0x021b0020 0x00007800 +wm 32 0x021b0818 0x00022227 +wm 32 0x021b4818 0x00022227 + +wm 32 0x021b083c 0x42740304 +wm 32 0x021b0840 0x026e0265 +wm 32 0x021b483c 0x02750306 +wm 32 0x021b4840 0x02720244 +wm 32 0x021b0848 0x463d4041 +wm 32 0x021b4848 0x42413c47 +wm 32 0x021b0850 0x37414441 +wm 32 0x021b4850 0x4633473b + +wm 32 0x021b080c 0x0025001f +wm 32 0x021b0810 0x00290027 + +wm 32 0x021b480c 0x001f002b +wm 32 0x021b4810 0x000f0029 + +wm 32 0x021b08b8 0x00000800 +wm 32 0x021b48b8 0x00000800 + +wm 32 0x021b001c 0x00000000 +wm 32 0x021b0404 0x00011006 + +/* set the default clock gate to save power */ +wm 32 0x020c4068 0x00C03F3F +wm 32 0x020c406c 0x0030FC03 +wm 32 0x020c4070 0x0FFFC000 +wm 32 0x020c4074 0x3FF00000 +wm 32 0x020c4078 0x00FFF300 +wm 32 0x020c407c 0x0F0000C3 +wm 32 0x020c4080 0x000003FF + +/* enable AXI cache for VDOA/VPU/IPU */ +wm 32 0x020e0010 0xF00000FF +/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */ +wm 32 0x020e0018 0x007F007F +wm 32 0x020e001c 0x007F007F diff --git a/arch/arm/boards/kontron-samx6i/lowlevel.c b/arch/arm/boards/kontron-samx6i/lowlevel.c new file mode 100644 index 0000000000..b01f7d7fbc --- /dev/null +++ b/arch/arm/boards/kontron-samx6i/lowlevel.c @@ -0,0 +1,78 @@ +/* + * Copyright (C) 2017 Michael Grzeschik + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static inline void setup_uart(void) +{ + void __iomem *iomuxbase = (void *)MX6_IOMUXC_BASE_ADDR; + + writel(0x4, iomuxbase + 0x016c); + + imx6_ungate_all_peripherals(); + imx6_uart_setup_ll(); + + putc_ll('>'); +} + +BAREBOX_IMD_TAG_STRING(samx6i_memsize_SZ_512M, IMD_TYPE_PARAMETER, "memsize=512", 0); +BAREBOX_IMD_TAG_STRING(samx6i_memsize_SZ_1G, IMD_TYPE_PARAMETER, "memsize=1024", 0); +BAREBOX_IMD_TAG_STRING(samx6i_memsize_SZ_2G, IMD_TYPE_PARAMETER, "memsize=2048", 0); + +static void __noreturn start_imx6_samx6i_common(uint32_t size, + bool do_early_uart_config, + void *fdt_blob_fixed_offset) +{ + void *fdt; + + imx6_cpu_lowlevel_init(); + /* OCRAM Free Area is 0x00907000 to 0x00938000 (196KB) */ + arm_setup_stack(0x00920000 - 8); + + if (do_early_uart_config && IS_ENABLED(CONFIG_DEBUG_LL)) + setup_uart(); + + fdt = fdt_blob_fixed_offset - get_runtime_offset(); + + barebox_arm_entry(0x10000000, size, fdt); +} + +#define SAMX6I_ENTRY(name, fdt_name, memory_size, do_early_uart_config) \ + ENTRY_FUNCTION(name, r0, r1, r2) \ + { \ + extern char __dtb_##fdt_name##_start[]; \ + \ + IMD_USED(samx6i_memsize_##memory_size); \ + \ + start_imx6_samx6i_common(memory_size, do_early_uart_config, \ + __dtb_##fdt_name##_start); \ + } + +SAMX6I_ENTRY(start_imx6q_samx6i_512m, imx6q_samx6i, SZ_512M, true); +SAMX6I_ENTRY(start_imx6q_samx6i_1g, imx6q_samx6i, SZ_1G, true); +SAMX6I_ENTRY(start_imx6q_samx6i_2g, imx6q_samx6i, SZ_2G, true); + +SAMX6I_ENTRY(start_imx6dl_samx6i_512m, imx6dl_samx6i, SZ_512M, true); +SAMX6I_ENTRY(start_imx6dl_samx6i_1g, imx6dl_samx6i, SZ_1G, true); +SAMX6I_ENTRY(start_imx6dl_samx6i_2g, imx6dl_samx6i, SZ_2G, true); diff --git a/arch/arm/configs/imx_v7_defconfig b/arch/arm/configs/imx_v7_defconfig index 62d623806c..08ec6eb862 100644 --- a/arch/arm/configs/imx_v7_defconfig +++ b/arch/arm/configs/imx_v7_defconfig @@ -11,6 +11,7 @@ CONFIG_MACH_GUF_VINCELL_XLOAD=y CONFIG_MACH_TQMA53=y CONFIG_MACH_FREESCALE_MX53_VMX53=y CONFIG_MACH_PHYTEC_SOM_IMX6=y +CONFIG_MACH_KONTRON_SAMX6I=y CONFIG_MACH_DFI_FS700_M60=y CONFIG_MACH_GUF_SANTARO=y CONFIG_MACH_REALQ7=y diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 0526a6f407..db703c1e0f 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -28,6 +28,8 @@ pbl-dtb-$(CONFIG_MACH_GLOBALSCALE_MIRABOX) += armada-370-mirabox-bb.dtb.o pbl-dtb-$(CONFIG_MACH_GUF_SANTARO) += imx6q-guf-santaro.dtb.o pbl-dtb-$(CONFIG_MACH_GUF_VINCELL) += imx53-guf-vincell.dtb.o imx53-guf-vincell-lt.dtb.o pbl-dtb-$(CONFIG_MACH_GW_VENTANA) += imx6q-gw54xx.dtb.o +pbl-dtb-$(CONFIG_MACH_KONTRON_SAMX6I) += imx6q-samx6i.dtb.o \ + imx6dl-samx6i.dtb.o pbl-dtb-$(CONFIG_MACH_LENOVO_IX4_300D) += armada-xp-lenovo-ix4-300d-bb.dtb.o pbl-dtb-$(CONFIG_MACH_MARVELL_ARMADA_XP_GP) += armada-xp-gp-bb.dtb.o pbl-dtb-$(CONFIG_MACH_NETGEAR_RN104) += armada-370-rn104-bb.dtb.o diff --git a/arch/arm/dts/imx6dl-samx6i.dts b/arch/arm/dts/imx6dl-samx6i.dts new file mode 100644 index 0000000000..b060fc075a --- /dev/null +++ b/arch/arm/dts/imx6dl-samx6i.dts @@ -0,0 +1,21 @@ +/* + * Copyright 2017 Michael Grzeschik, Pengutronix + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include +#include "imx6dl.dtsi" +#include "imx6qdl-smarc-samx6i.dtsi" +#include "imx6qdl-samx6i.dtsi" + +/ { + model = "Kontron sAMX6i"; + compatible = "kontron,imx6dl-samx6i", "fsl,imx6dl"; +}; diff --git a/arch/arm/dts/imx6q-samx6i.dts b/arch/arm/dts/imx6q-samx6i.dts new file mode 100644 index 0000000000..13210cd5c1 --- /dev/null +++ b/arch/arm/dts/imx6q-samx6i.dts @@ -0,0 +1,21 @@ +/* + * Copyright 2017 Michael Grzeschik, Pengutronix + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include +#include "imx6q.dtsi" +#include "imx6qdl-smarc-samx6i.dtsi" +#include "imx6qdl-samx6i.dtsi" + +/ { + model = "Kontron sAMX6i"; + compatible = "kontron,imx6q-samx6i", "fsl,imx6q"; +}; diff --git a/arch/arm/dts/imx6qdl-samx6i.dtsi b/arch/arm/dts/imx6qdl-samx6i.dtsi new file mode 100644 index 0000000000..6783fbb48d --- /dev/null +++ b/arch/arm/dts/imx6qdl-samx6i.dtsi @@ -0,0 +1,137 @@ +/* + * Copyright 2018 Pengutronix, Michael Grzeschik + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/ { + chosen { + linux,stdout-path = &uart2; + + environment-spinor { + compatible = "barebox,environment"; + device-path = &flash, "partname:environment"; + status = "disabled"; + }; + + environment-sd4 { + compatible = "barebox,environment"; + device-path = &usdhc4, "partname:environment"; + status = "disabled"; + }; + }; +}; + +&ecspi4 { + status = "okay"; +}; + +&fec { + status = "okay"; +}; + +&flash { + status = "okay"; + + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "bootloader"; + reg = <0x000000 0x0c0000>; + }; + + partition@c0000 { + label = "environment"; + reg = <0x0c0000 0x010000>; + }; + + partition@d0000 { + label = "user"; + reg = <0x0d0000 0x200000>; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_boot>; + + pinctrl_boot: boot { + fsl,pins = < + /* GPIOS for version and id detection */ + MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x80000000 + MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x80000000 + MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x80000000 + >; + }; +}; + +&mmdc0 { + /* We define RAM by version and id pins in boardfile */ + status = "disabled"; +}; + +&uart2 { + status = "okay"; +}; + +&usbotg { + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; + +&usdhc4 { + status = "okay"; + + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "bootloader"; + reg = <0x0 0xe0000>; + }; + + partition@e0000 { + label = "environment"; + reg = <0xe0000 0x20000>; + }; +}; diff --git a/arch/arm/dts/imx6qdl-smarc-samx6i.dtsi b/arch/arm/dts/imx6qdl-smarc-samx6i.dtsi new file mode 100644 index 0000000000..e259a97d5d --- /dev/null +++ b/arch/arm/dts/imx6qdl-smarc-samx6i.dtsi @@ -0,0 +1,470 @@ +/* + * Copyright 2017 Priit Laes + * + * Based on initial work by Nikita Yushchenko + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + * + */ + +#include + +/ { + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_3v3_s5: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "V_3V3_S5"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_1v8_s5: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "V_1V8_S5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3v3_s0: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "V_3V3_S0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_1v0_s0: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "V_1V0_S0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-boot-on; + regulator-always-on; + }; + }; + + i2c_pfuze: i2c-gpio-0 { + compatible = "i2c-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c_gpio_0>; + sda-gpios = <&gpio1 28 0>; + scl-gpios = <&gpio1 30 0>; + #address-cells = <1>; + #size-cells = <0>; + i2c-gpio,delay-us = <2>; + }; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + status = "disabled"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + status = "disabled"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet_smarc>; + phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; + phy-mode = "rgmii"; + status = "disabled"; +}; + +&i2c_pfuze { + pfuze100@08 { + compatible = "fsl,pfuze100"; + reg = <0x08>; + + /* Looks unused by pfuze100 driver */ + interrupt-parent = <&gpio7>; + interrupts = <13 8>; /* 8 = level, active low */ + + regulators { + reg_v_core_s0: sw1ab { + regulator-name = "V_CORE_S0"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_vddsoc_s0: sw1c { + regulator-name = "V_VDDSOC_S0"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3v15_s0: sw2 { + regulator-name = "V_3V15_S0"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + /* sw3a/b is used in dual mode, but driver does not + * support it? Although, there's no need to control + * DDR power - so just leaving dummy entries for sw3a + * and sw3b for now. + */ + sw3a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3b { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_1v8_s0: sw4 { + regulator-name = "V_1V8_S0"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + /* Regulator for USB */ + reg_5v0_s0: swbst { + regulator-name = "V_5V0_S0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + regulator-boot-on; + }; + + reg_vsnvs: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_vrefddr: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + /* Per schematics, of all VGEN's, only VGEN5 has some + * usage ... but even that - over DNI resistor + */ + vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + reg_2v5_s0: vgen5 { + regulator-name = "V_2V5_S0"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; +}; + +&ecspi4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi4>; + fsl,spi-num-chipselects = <3>; + cs-gpios = <&gpio3 24 0>, <&gpio3 29 0>, <&gpio3 25 0>; + status = "disabled"; + + flash: m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "winbond,w25q64dw", "jedec,spi-nor"; + spi-max-frequency = <20000000>; + reg = <0>; + status = "disabled"; + }; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "disabled"; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + wake-up-gpio = <&gpio6 18 GPIO_ACTIVE_HIGH>; + reset-gpio = <&gpio3 13 GPIO_ACTIVE_HIGH>; + status = "disabled"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_smarc>; + fsl,uart-has-rtscts; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2_smarc>; + status = "disabled"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4_smarc>; + fsl,uart-has-rtscts; + status = "disabled"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5_smarc>; + status = "disabled"; +}; + +&usbotg { + /* + * no 'imx6-usb-charger-detection' + * since USB_OTG_CHD_B pin is not wired + */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + status = "disabled"; +}; + +&usbh1 { + vbus-supply = <®_5v0_s0>; + status = "disabled"; +}; + +&usdhc4 { + /* Internal eMMC, optional on some boards */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + bus-width = <8>; + no-1-8-v; + non-removable; + status = "disabled"; +}; + +&iomuxc { + pinctrl_flexcan1: flexcan1-smarc { + fsl,pins = < + MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x80000000 + MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x80000000 + >; + }; + + pinctrl_flexcan2: flexcan2-smarc { + fsl,pins = < + MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x80000000 + MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x80000000 + >; + }; + + pinctrl_enet_smarc: fecgrp-smarc { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x80000000 + >; + }; + + pinctrl_i2c_gpio_0: i2c-gpio-0-smarc { + fsl,pins = < + /* SCL GPIO */ + MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 + /* SDA GPIO */ + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 + >; + }; + + pinctrl_i2c3: i2c3-smarc { + fsl,pins = < + MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_ecspi4: ecspi4-smarc { + fsl,pins = < + MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x80000000 + MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x80000000 + MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x80000000 + MX6QDL_PAD_EIM_D29__ECSPI4_SS0 0x80000000 + + /* In hardware, ECSPI4's SS0,SS1,SS3 are wired. + But spi-imx driver support only continuous + numbering, and only can use GPIOs (and not + ECSPI's hardware SS) for CS. So linux view + of CS numbers differs from hw view, and + pins are configured as GPIOs */ + + /* physical - CS2, in linux - CS0, either internal flash or SMARC CS0 */ + MX6QDL_PAD_EIM_D24__GPIO3_IO24 0x80000000 + /* physical - CS0, in linux - CS1, either SMARC CS0 or not-connected */ + MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x80000000 + /* physical - CS3, in linux - CS2, SMARC CS1 */ + MX6QDL_PAD_EIM_D25__GPIO3_IO25 0x80000000 + >; + }; + + pinctrl_pcie: pcie-smarc { + fsl,pins = < + /* RST_PCIE_A# */ + MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x80000000 + /* PCIE_WAKE# */ + MX6QDL_PAD_SD3_DAT6__GPIO6_IO18 0x80000000 + >; + }; + + pinctrl_uart1_smarc: uart1grp-smarc { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D20__UART1_RTS_B 0x1b0b1 + MX6QDL_PAD_EIM_D19__UART1_CTS_B 0x1b0b1 + >; + }; + + pinctrl_uart2_smarc: uart2grp-smarc { + fsl,pins = < + MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart4_smarc: uart4grp-smarc { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1 + MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1 + >; + }; + + pinctrl_uart5_smarc: uart5grp-smarc { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbotg: usbotg-grp-smarc { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x1f8b0 + /* TODO: Comment out power and OC gpio's for now, since + * these are not used by driver + */ + /* USB power */ + // MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x80000000 + /* USB OC */ + // MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x80000000 + >; + }; + + pinctrl_usdhc4: usdhc4grp-smarc { + fsl,pins = < + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x17059 + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 + MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059 + MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059 + MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059 + MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 + >; + }; +}; diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index eb135c3f53..cf5338e5fa 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -294,6 +294,10 @@ config MACH_PHYTEC_SOM_IMX6 select ARCH_IMX6 select ARCH_IMX6UL +config MACH_KONTRON_SAMX6I + bool "Kontron sAMX6i" + select ARCH_IMX6 + config MACH_DFI_FS700_M60 bool "DFI i.MX6 FS700 M60 Q7 Board" select ARCH_IMX6 diff --git a/images/Makefile.imx b/images/Makefile.imx index 5e0043f1f0..4ed75ea3b9 100644 --- a/images/Makefile.imx +++ b/images/Makefile.imx @@ -455,6 +455,36 @@ CFG_start_phytec_phycore_imx6ull_som_256mb.pblx.imximg = $(board)/phytec-som-imx FILE_barebox-phytec-phycore-imx6ull-256mb.img = start_phytec_phycore_imx6ull_som_256mb.pblx.imximg image-$(CONFIG_MACH_PHYTEC_SOM_IMX6) += barebox-phytec-phycore-imx6ull-256mb.img +pblx-$(CONFIG_MACH_KONTRON_SAMX6I) += start_imx6q_samx6i_512m +CFG_start_imx6q_samx6i_512m.pblx.imximg = $(board)/kontron-samx6i/flash-header-samx6i-quad.imxcfg +FILE_barebox-imx6q-samx6i-512m.img = start_imx6q_samx6i_512m.pblx.imximg +image-$(CONFIG_MACH_KONTRON_SAMX6I) += barebox-imx6q-samx6i-512m.img + +pblx-$(CONFIG_MACH_KONTRON_SAMX6I) += start_imx6q_samx6i_1g +CFG_start_imx6q_samx6i_1g.pblx.imximg = $(board)/kontron-samx6i/flash-header-samx6i-quad.imxcfg +FILE_barebox-imx6q-samx6i-1g.img = start_imx6q_samx6i_1g.pblx.imximg +image-$(CONFIG_MACH_KONTRON_SAMX6I) += barebox-imx6q-samx6i-1g.img + +pblx-$(CONFIG_MACH_KONTRON_SAMX6I) += start_imx6q_samx6i_2g +CFG_start_imx6q_samx6i_2g.pblx.imximg = $(board)/kontron-samx6i/flash-header-samx6i-quad.imxcfg +FILE_barebox-imx6q-samx6i-2g.img = start_imx6q_samx6i_2g.pblx.imximg +image-$(CONFIG_MACH_KONTRON_SAMX6I) += barebox-imx6q-samx6i-2g.img + +pblx-$(CONFIG_MACH_KONTRON_SAMX6I) += start_imx6dl_samx6i_512m +CFG_start_imx6dl_samx6i_512m.pblx.imximg = $(board)/kontron-samx6i/flash-header-samx6i-duallite.imxcfg +FILE_barebox-imx6dl-samx6i-512m.img = start_imx6dl_samx6i_512m.pblx.imximg +image-$(CONFIG_MACH_KONTRON_SAMX6I) += barebox-imx6dl-samx6i-512m.img + +pblx-$(CONFIG_MACH_KONTRON_SAMX6I) += start_imx6dl_samx6i_1g +CFG_start_imx6dl_samx6i_1g.pblx.imximg = $(board)/kontron-samx6i/flash-header-samx6i-duallite.imxcfg +FILE_barebox-imx6dl-samx6i-1g.img = start_imx6dl_samx6i_1g.pblx.imximg +image-$(CONFIG_MACH_KONTRON_SAMX6I) += barebox-imx6dl-samx6i-1g.img + +pblx-$(CONFIG_MACH_KONTRON_SAMX6I) += start_imx6dl_samx6i_2g +CFG_start_imx6dl_samx6i_2g.pblx.imximg = $(board)/kontron-samx6i/flash-header-samx6i-duallite.imxcfg +FILE_barebox-imx6dl-samx6i-2g.img = start_imx6dl_samx6i_2g.pblx.imximg +image-$(CONFIG_MACH_KONTRON_SAMX6I) += barebox-imx6dl-samx6i-2g.img + pblx-$(CONFIG_MACH_GW_VENTANA) += start_imx6q_gw54xx_1gx64 CFG_start_imx6q_gw54xx_1gx64.pblx.imximg = $(board)/gateworks-ventana/flash-header-ventana-quad-1gx64.imxcfg FILE_barebox-gateworks-imx6q-ventana-1gx64.img = start_imx6q_gw54xx_1gx64.pblx.imximg -- 2.16.1 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox