From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:67c:670:201:290:27ff:fe1d:cc33]) by bombadil.infradead.org with esmtps (Exim 4.90_1 #2 (Red Hat Linux)) id 1exqps-0000gq-6n for barebox@lists.infradead.org; Mon, 19 Mar 2018 09:12:24 +0000 From: Sascha Hauer Date: Mon, 19 Mar 2018 10:11:38 +0100 Message-Id: <20180319091146.4112-7-s.hauer@pengutronix.de> In-Reply-To: <20180319091146.4112-1-s.hauer@pengutronix.de> References: <20180319091146.4112-1-s.hauer@pengutronix.de> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: [PATCH 06/14] ARM: i.MX8: Add i.MX8mq EVK support To: Barebox List Signed-off-by: Sascha Hauer --- arch/arm/boards/Makefile | 1 + arch/arm/boards/nxp-imx8mq-evk/Makefile | 2 + arch/arm/boards/nxp-imx8mq-evk/board.c | 44 +++ arch/arm/boards/nxp-imx8mq-evk/lowlevel.c | 43 +++ arch/arm/dts/Makefile | 1 + arch/arm/dts/imx8mq-evk.dts | 446 ++++++++++++++++++++++++++++++ arch/arm/mach-imx/Kconfig | 4 + images/Makefile.imx | 6 + 8 files changed, 547 insertions(+) create mode 100644 arch/arm/boards/nxp-imx8mq-evk/Makefile create mode 100644 arch/arm/boards/nxp-imx8mq-evk/board.c create mode 100644 arch/arm/boards/nxp-imx8mq-evk/lowlevel.c create mode 100644 arch/arm/dts/imx8mq-evk.dts diff --git a/arch/arm/boards/Makefile b/arch/arm/boards/Makefile index ca187ccb89..8a14383ce6 100644 --- a/arch/arm/boards/Makefile +++ b/arch/arm/boards/Makefile @@ -78,6 +78,7 @@ obj-$(CONFIG_MACH_NVIDIA_BEAVER) += nvidia-beaver/ obj-$(CONFIG_MACH_NVIDIA_JETSON) += nvidia-jetson-tk1/ obj-$(CONFIG_MACH_NXDB500) += netx/ obj-$(CONFIG_MACH_NXP_IMX6ULL_EVK) += nxp-imx6ull-evk/ +obj-$(CONFIG_MACH_NXP_IMX8MQ_EVK) += nxp-imx8mq-evk/ obj-$(CONFIG_MACH_OMAP343xSDP) += omap343xdsp/ obj-$(CONFIG_MACH_OMAP3EVM) += omap3evm/ obj-$(CONFIG_MACH_PANDA) += panda/ diff --git a/arch/arm/boards/nxp-imx8mq-evk/Makefile b/arch/arm/boards/nxp-imx8mq-evk/Makefile new file mode 100644 index 0000000000..01c7a259e9 --- /dev/null +++ b/arch/arm/boards/nxp-imx8mq-evk/Makefile @@ -0,0 +1,2 @@ +obj-y += board.o +lwl-y += lowlevel.o diff --git a/arch/arm/boards/nxp-imx8mq-evk/board.c b/arch/arm/boards/nxp-imx8mq-evk/board.c new file mode 100644 index 0000000000..d93e21da17 --- /dev/null +++ b/arch/arm/boards/nxp-imx8mq-evk/board.c @@ -0,0 +1,44 @@ +/* + * Copyright (C) 2018 Sascha Hauer, Pengutronix + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation. + * + */ + +#include +#include +#include +#include + +static int imx8mq_evk_mem_init(void) +{ + arm_add_mem_device("ram0", 0x40000000, SZ_2G); + + request_sdram_region("ATF", 0x40000000, SZ_128K); + + return 0; +} +mem_initcall(imx8mq_evk_mem_init); + +static int nxp_imx8mq_evk_init(void) +{ + if (!of_machine_is_compatible("fsl,imx8mq-evk")) + return 0; + + barebox_set_hostname("imx8mq-evk"); + + return 0; +} +device_initcall(nxp_imx8mq_evk_init); diff --git a/arch/arm/boards/nxp-imx8mq-evk/lowlevel.c b/arch/arm/boards/nxp-imx8mq-evk/lowlevel.c new file mode 100644 index 0000000000..98198b3297 --- /dev/null +++ b/arch/arm/boards/nxp-imx8mq-evk/lowlevel.c @@ -0,0 +1,43 @@ +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +extern char __dtb_imx8mq_evk_start[]; + +static noinline void nxp_imx8mq_evk(void) +{ + pbl_set_putc(imx_uart_putc, IOMEM(0x30860000)); + + printf("i.MX8MQ EVK\n"); + + barebox_arm_entry(0x40000000, 0xc0000000, __dtb_imx8mq_evk_start); +} + +ENTRY_FUNCTION(start_nxp_imx8mq_evk, r0, r1, r2) +{ + arm_cpu_lowlevel_init(); + + relocate_to_current_adr(); + setup_c(); + + nxp_imx8mq_evk(); +} diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 0526a6f407..75d29bf85d 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -81,6 +81,7 @@ pbl-dtb-$(CONFIG_MACH_SOLIDRUN_MICROSOM) += imx6dl-hummingboard.dtb.o imx6q-humm pbl-dtb-$(CONFIG_MACH_TECHNEXION_WANDBOARD) += imx6q-wandboard.dtb.o imx6dl-wandboard.dtb.o pbl-dtb-$(CONFIG_MACH_TECHNEXION_PICO_HOBBIT) += imx6ul-pico-hobbit.dtb.o pbl-dtb-$(CONFIG_MACH_NXP_IMX6ULL_EVK) += imx6ull-14x14-evk.dtb.o +pbl-dtb-$(CONFIG_MACH_NXP_IMX8MQ_EVK) += imx8mq-evk.dtb.o pbl-dtb-$(CONFIG_MACH_TORADEX_COLIBRI_T20) += tegra20-colibri-iris.dtb.o pbl-dtb-$(CONFIG_MACH_TOSHIBA_AC100) += tegra20-paz00.dtb.o pbl-dtb-$(CONFIG_MACH_TQMA53) += imx53-mba53.dtb.o diff --git a/arch/arm/dts/imx8mq-evk.dts b/arch/arm/dts/imx8mq-evk.dts new file mode 100644 index 0000000000..fd9f780b65 --- /dev/null +++ b/arch/arm/dts/imx8mq-evk.dts @@ -0,0 +1,446 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2017 NXP + * Copyright (C) 2017 Pengutronix, Lucas Stach + */ + +/dts-v1/; + +#include "imx8mq.dtsi" + +/ { + model = "NXP i.MX8MQ EVK"; + compatible = "fsl,imx8mq-evk", "fsl,imx8mq"; + + chosen { + bootargs = "console=ttymxc0,115200 ip=dhcp root=/dev/nfs nfsroot=/home/lst/nfsroot/mx8,v3,tcp"; + //bootargs = "console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait rw"; + stdout-path = &uart1; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0x00000000 0x40000000 0 0xc0000000>; + }; + + reg_usdhc2_vmmc: regulator-vsd-3v3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usdhc2>; + compatible = "regulator-fixed"; + regulator-name = "VSD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&dcss { + status = "okay"; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1_mdc>, <&pinctrl_fec1_mdio>, + <&pinctrl_fec1_data_tx>, <&pinctrl_fec1_data_rx>, + <&pinctrl_fec1_phy_reset>; + phy-mode = "rgmii-id"; + status = "okay"; +}; + +&hdmi { + status ="okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pmic@8 { + compatible = "fsl,pfuze100"; + reg = <0x8>; + + regulators { + sw1a_reg: sw1ab { + regulator-min-microvolt = <825000>; + regulator-max-microvolt = <1100000>; + }; + + sw1c_reg: sw1c { + regulator-min-microvolt = <825000>; + regulator-max-microvolt = <1100000>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + sw3a_reg: sw3ab { + regulator-min-microvolt = <825000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-always-on; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <975000>; + regulator-always-on; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1675000>; + regulator-max-microvolt = <1975000>; + regulator-always-on; + }; + + vgen4_reg: vgen4 { + regulator-min-microvolt = <1625000>; + regulator-max-microvolt = <1875000>; + regulator-always-on; + }; + + vgen5_reg: vgen5 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3625000>; + regulator-always-on; + }; + + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; +}; + +&ocotp { + barebox,provide-mac-address = <&fec1 0x640>; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&usb3_phy1 { + status = "okay"; +}; + +&usb3_1 { + status = "okay"; +}; + +&usb_dwc3_1 { + status = "okay"; + dr_mode = "host"; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1_cd_reset>, <&pinctrl_usdhc1_clk_strobe>, + <&pinctrl_usdhc1_data>; + pinctrl-1 = <&pinctrl_usdhc1_cd_reset>, + <&pinctrl_usdhc1_clk_strobe_100mhz>, + <&pinctrl_usdhc1_data_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_cd_reset>, + <&pinctrl_usdhc1_clk_strobe_200mhz>, + <&pinctrl_usdhc1_data_200mhz>; + vqmmc-supply = <&sw4_reg>; + bus-width = <8>; + non-removable; + no-sd; + no-sdio; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2_vselect>, <&pinctrl_usdhc2_clk>, + <&pinctrl_usdhc2_data>; + pinctrl-1 = <&pinctrl_usdhc2_vselect>, <&pinctrl_usdhc2_clk_100mhz>, + <&pinctrl_usdhc2_data_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_vselect>, <&pinctrl_usdhc2_clk_200mhz>, + <&pinctrl_usdhc2_data_200mhz>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_usdhc2_vmmc>; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl_fec1_mdc: fec1mdcgrp { + pinmux = ; + drive-strength = <3>; + slew-rate = <0>; + }; + + pinctrl_fec1_mdio: fec1mdiogrp { + pinmux = ; + drive-strength = <3>; + slew-rate = <0>; + drive-open-drain; + }; + + pinctrl_fec1_phy_reset: fec1phyresetgrp { + pinmux = ; + drive-strength = <1>; + slew-rate = <0>; + }; + + pinctrl_fec1_data_tx: fec1datatxgrp { + pinmux = < + MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 + MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 + MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 + MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 + MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC + MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL + >; + drive-strength = <7>; + slew-rate = <3>; + }; + + pinctrl_fec1_data_rx: fec1datarxgrp { + pinmux = < + MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 + MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 + MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 + MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 + MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC + MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL + >; + drive-strength = <1>; + slew-rate = <2>; + input-schmitt-enable; + }; + + pinctrl_i2c1: i2c1grp { + pinmux = < + MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL + MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA + >; + drive-strength = <7>; + slew-rate = <0>; + drive-open-drain; + input-enable; + }; + + pinctrl_reg_usdhc2: regusdhc2grpgpio { + pinmux = ; + drive-strength = <1>; + slew-rate = <0>; + bias-pull-up; + }; + + pinctrl_uart1: uart1grp { + pinmux = < + MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX + MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX + >; + drive-strength = <1>; + slew-rate = <0>; + bias-pull-up; + }; + + pinctrl_usdhc1_cd_reset: usdhc1cdgrp { + pinmux = < + MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12 + MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B + >; + drive-strength = <1>; + slew-rate = <0>; + bias-pull-up; + }; + + pinctrl_usdhc1_clk_strobe: usdhc1clkgrp { + pinmux = < + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE + >; + drive-strength = <3>; + slew-rate = <0>; + }; + + pinctrl_usdhc1_data: usdhc1datagrp { + pinmux = < + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 + >; + drive-strength = <3>; + slew-rate = <0>; + bias-pull-up; + input-schmitt-enable; + }; + + pinctrl_usdhc1_clk_strobe_100mhz: usdhc1clk100grp { + pinmux = < + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE + >; + drive-strength = <3>; + slew-rate = <0>; + }; + + pinctrl_usdhc1_data_100mhz: usdhc1data100grp { + pinmux = < + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 + >; + drive-strength = <5>; + slew-rate = <1>; + bias-pull-up; + input-schmitt-enable; + }; + + pinctrl_usdhc1_clk_strobe_200mhz: usdhc1clk200grp { + pinmux = < + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE + >; + drive-strength = <7>; + slew-rate = <3>; + }; + + pinctrl_usdhc1_data_200mhz: usdhc1data200grp { + pinmux = < + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 + >; + drive-strength = <7>; + slew-rate = <3>; + bias-pull-up; + input-schmitt-enable; + }; + + pinctrl_usdhc2_vselect: usdhc2vselectgrp { + pinmux = ; + drive-strength = <1>; + slew-rate = <0>; + bias-pull-up; + }; + + pinctrl_usdhc2_clk: usdhc2clkgrp { + pinmux = ; + drive-strength = <3>; + slew-rate = <0>; + }; + + pinctrl_usdhc2_data: usdhc2datagrp { + pinmux = < + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 + >; + drive-strength = <3>; + slew-rate = <0>; + bias-pull-up; + input-schmitt-enable; + }; + + pinctrl_usdhc2_clk_100mhz: usdhc2clk100grp { + pinmux = ; + drive-strength = <5>; + slew-rate = <1>; + }; + + pinctrl_usdhc2_data_100mhz: usdhc2data100grp { + pinmux = < + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 + >; + drive-strength = <5>; + slew-rate = <1>; + bias-pull-up; + input-schmitt-enable; + }; + + pinctrl_usdhc2_clk_200mhz: usdhc2clk200grp { + pinmux = ; + drive-strength = <7>; + slew-rate = <3>; + }; + + pinctrl_usdhc2_data_200mhz: usdhc2data200grp { + pinmux = < + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 + >; + drive-strength = <7>; + slew-rate = <3>; + bias-pull-up; + input-schmitt-enable; + }; + + pinctrl_wdog: wdoggrp { + pinmux = ; + drive-strength = <6>; + slew-rate = <0>; + bias-pull-up; + }; +}; diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 54078cc65b..5b430b19d6 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -429,6 +429,10 @@ config MACH_NXP_IMX6ULL_EVK bool "NXP i.MX6ull EVK Board" select ARCH_IMX6UL +config MACH_NXP_IMX8MQ_EVK + bool "NXP i.MX8MQ EVK Board" + select ARCH_IMX8MQ + endif # ---------------------------------------------------------- diff --git a/images/Makefile.imx b/images/Makefile.imx index 5e0043f1f0..b2325553bc 100644 --- a/images/Makefile.imx +++ b/images/Makefile.imx @@ -490,7 +490,13 @@ CFG_start_zii_vf610_dev.pblx.imximg = $(board)/zii-vf610-dev/flash-header-zii-vf FILE_barebox-zii-vf610-dev.img = start_zii_vf610_dev.pblx.imximg image-$(CONFIG_MACH_ZII_VF610_DEV) += barebox-zii-vf610-dev.img +# ----------------------- i.MX7 based boards --------------------------- pblx-$(CONFIG_MACH_FREESCALE_MX7_SABRESD) += start_imx7d_sabresd CFG_start_imx7d_sabresd.pblx.imximg = $(board)/freescale-mx7-sabresd/flash-header-mx7-sabresd.imxcfg FILE_barebox-freescale-mx7-sabresd.img = start_imx7d_sabresd.pblx.imximg image-$(CONFIG_MACH_FREESCALE_MX7_SABRESD) += barebox-freescale-mx7-sabresd.img + +# ----------------------- i.MX8mq based boards -------------------------- +pblx-$(CONFIG_MACH_NXP_IMX8MQ_EVK) += start_nxp_imx8mq_evk +FILE_barebox-nxp-imx8mq-evk.img = start_nxp_imx8mq_evk.pblx +image-$(CONFIG_MACH_NXP_IMX8MQ_EVK) += barebox-nxp-imx8mq-evk.img -- 2.16.1 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox