From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:67c:670:201:290:27ff:fe1d:cc33]) by bombadil.infradead.org with esmtps (Exim 4.90_1 #2 (Red Hat Linux)) id 1f6AsC-0008Sg-6g for barebox@lists.infradead.org; Wed, 11 Apr 2018 08:12:59 +0000 Date: Wed, 11 Apr 2018 10:12:40 +0200 From: Sascha Hauer Message-ID: <20180411081240.st6jjhg2vzq7g3gc@pengutronix.de> References: <1522934149.24545.3.camel@googlemail.com> <1523274839.3785.25.camel@googlemail.com> MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: <1523274839.3785.25.camel@googlemail.com> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: [PATCH v2] ARM: Add Advantech imx6 board support To: Christoph Fritz Cc: barebox@lists.infradead.org On Mon, Apr 09, 2018 at 01:53:59PM +0200, Christoph Fritz wrote: > Add support for Advantech i.MX6 SOM named ROM-7421. > > Signed-off-by: Christoph Fritz > --- > Changes since v0: > - distinguish between MMC environment names in pr_notice() board.c > - rework eMMC partition layout and don't use its hw-bootpartition for now > - purge writing clock registers > - rework and simplify lowlevel.c init and use imx6q_barebox_entry(fdt) > - s/linux,stdout-path/stdout-path in dts > - rework and simplify spi nor partition layout > - remove additional pinctrl subnode from dts > - remove setting of explicit ARCH_TEXT_BASE in Kconfig > - use bitop Macro for ar8035_phy_fixup() > - use imx_setup_pad() for early debug uart > --- Applied, thanks Sascha > arch/arm/boards/Makefile | 1 + > arch/arm/boards/advantech-mx6/Makefile | 2 + > arch/arm/boards/advantech-mx6/board.c | 101 +++++++++ > .../flash-header-advantech-rom-7421.imxcfg | 66 ++++++ > arch/arm/boards/advantech-mx6/lowlevel.c | 56 +++++ > arch/arm/configs/imx_v7_defconfig | 1 + > arch/arm/dts/Makefile | 1 + > arch/arm/dts/imx6dl-advantech-rom-7421.dts | 225 +++++++++++++++++++++ > arch/arm/mach-imx/Kconfig | 5 + > images/Makefile.imx | 5 + > 10 files changed, 463 insertions(+) > create mode 100644 arch/arm/boards/advantech-mx6/Makefile > create mode 100644 arch/arm/boards/advantech-mx6/board.c > create mode 100644 arch/arm/boards/advantech-mx6/flash-header-advantech-rom-7421.imxcfg > create mode 100644 arch/arm/boards/advantech-mx6/lowlevel.c > create mode 100755 arch/arm/dts/imx6dl-advantech-rom-7421.dts > > diff --git a/arch/arm/boards/Makefile b/arch/arm/boards/Makefile > index ca187cc..521f37d 100644 > --- a/arch/arm/boards/Makefile > +++ b/arch/arm/boards/Makefile > @@ -1,4 +1,5 @@ > # keep sorted by CONFIG_* macro name. > +obj-$(CONFIG_MACH_ADVANTECH_ROM_742X) += advantech-mx6/ > obj-$(CONFIG_MACH_AFI_GF) += afi-gf/ > obj-$(CONFIG_MACH_ANIMEO_IP) += animeo_ip/ > obj-$(CONFIG_MACH_ARCHOSG9) += archosg9/ > diff --git a/arch/arm/boards/advantech-mx6/Makefile b/arch/arm/boards/advantech-mx6/Makefile > new file mode 100644 > index 0000000..01c7a25 > --- /dev/null > +++ b/arch/arm/boards/advantech-mx6/Makefile > @@ -0,0 +1,2 @@ > +obj-y += board.o > +lwl-y += lowlevel.o > diff --git a/arch/arm/boards/advantech-mx6/board.c b/arch/arm/boards/advantech-mx6/board.c > new file mode 100644 > index 0000000..4a30a84 > --- /dev/null > +++ b/arch/arm/boards/advantech-mx6/board.c > @@ -0,0 +1,101 @@ > +/* > + * Copyright (C) 2018 Christoph Fritz > + * > + * This program is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation; either version 2 of > + * the License, or (at your option) any later version. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + */ > + > +#include > +#include > +#include > +#include > +#include > + > +static int ar8035_phy_fixup(struct phy_device *dev) > +{ > + u16 val; > + > + /* Ar803x phy SmartEEE feature cause link status generates glitch, > + * which cause ethernet link down/up issue, so disable SmartEEE > + */ > + phy_write(dev, 0xd, 0x3); > + phy_write(dev, 0xe, 0x805d); > + phy_write(dev, 0xd, 0x4003); > + > + val = phy_read(dev, 0xe); > + phy_write(dev, 0xe, val & ~BIT(8)); > + > + /* To enable AR8031 ouput a 125MHz clk from CLK_25M */ > + phy_write(dev, 0xd, 0x7); > + phy_write(dev, 0xe, 0x8016); > + phy_write(dev, 0xd, 0x4007); > + > + val = phy_read(dev, 0xe); > + val &= 0xffe3; > + val |= 0x18; > + phy_write(dev, 0xe, val); > + > + /* introduce tx clock delay */ > + phy_write(dev, 0x1d, 0x5); > + val = phy_read(dev, 0x1e); > + val |= 0x0100; > + phy_write(dev, 0x1e, val); > + > + return 0; > +} > + > +static int advantech_mx6_devices_init(void) > +{ > + int ret; > + char *environment_path, *envdev; > + > + if (!of_machine_is_compatible("advantech,imx6dl-rom-7421")) > + return 0; > + > + phy_register_fixup_for_uid(0x004dd072, 0xffffffef, ar8035_phy_fixup); > + > + switch (bootsource_get()) { > + case BOOTSOURCE_MMC: > + environment_path = basprintf("/chosen/environment-sd%d", > + bootsource_get_instance() + 1); > + if (bootsource_get_instance() + 1 == 4) > + envdev = "eMMC"; > + else if (bootsource_get_instance() + 1 == 2) > + envdev = "microSD"; > + else > + envdev = "MMC"; > + break; > + case BOOTSOURCE_SPI: > + envdev = "SPI"; > + environment_path = basprintf("/chosen/environment-spi"); > + break; > + default: > + environment_path = basprintf("/chosen/environment-sd4"); > + envdev = "MMC"; > + break; > + } > + > + if (environment_path) { > + ret = of_device_enable_path(environment_path); > + if (ret < 0) > + pr_warn("Failed to enable env partition '%s' (%d)\n", > + environment_path, ret); > + free(environment_path); > + } > + > + pr_notice("Using environment in %s\n", envdev); > + > + imx6_bbu_internal_mmc_register_handler("mmc3", "/dev/mmc3", > + BBU_HANDLER_FLAG_DEFAULT); > + > + return 0; > +} > +device_initcall(advantech_mx6_devices_init); > diff --git a/arch/arm/boards/advantech-mx6/flash-header-advantech-rom-7421.imxcfg b/arch/arm/boards/advantech-mx6/flash-header-advantech-rom-7421.imxcfg > new file mode 100644 > index 0000000..996ecc7 > --- /dev/null > +++ b/arch/arm/boards/advantech-mx6/flash-header-advantech-rom-7421.imxcfg > @@ -0,0 +1,66 @@ > +soc imx6 > +loadaddr 0x10000000 > +dcdofs 0x400 > + > +wm 32 0x020e0774 0x000C0000 > +wm 32 0x020e0754 0x00000000 > +wm 32 0x020e04ac 0x00000030 > +wm 32 0x020e04b0 0x00000030 > +wm 32 0x020e0464 0x00000030 > +wm 32 0x020e0490 0x00000030 > +wm 32 0x020e074c 0x00000030 > +wm 32 0x020e0494 0x00000030 > +wm 32 0x020e04a0 0x00000000 > +wm 32 0x020e04b4 0x00000030 > +wm 32 0x020e04b8 0x00000030 > +wm 32 0x020e076c 0x00000030 > +wm 32 0x020e0750 0x00020000 > +wm 32 0x020e04bc 0x00000030 > +wm 32 0x020e04c0 0x00000030 > +wm 32 0x020e04c4 0x00000030 > +wm 32 0x020e04c8 0x00000030 > +wm 32 0x020e0760 0x00020000 > +wm 32 0x020e0764 0x00000030 > +wm 32 0x020e0770 0x00000030 > +wm 32 0x020e0778 0x00000030 > +wm 32 0x020e077c 0x00000030 > +wm 32 0x020e0470 0x00000030 > +wm 32 0x020e0474 0x00000030 > +wm 32 0x020e0478 0x00000030 > +wm 32 0x020e047c 0x00000030 > +wm 32 0x021b0800 0xa1390003 > +wm 32 0x021b080c 0x001F001F > +wm 32 0x021b0810 0x001F001F > +wm 32 0x021b083c 0x42480248 > +wm 32 0x021b0840 0x022C0234 > +wm 32 0x021b0848 0x3E404244 > +wm 32 0x021b0850 0x30302C30 > +wm 32 0x021b081c 0x33333333 > +wm 32 0x021b0820 0x33333333 > +wm 32 0x021b0824 0x33333333 > +wm 32 0x021b0828 0x33333333 > +wm 32 0x021b08b8 0x00000800 > +wm 32 0x021b0004 0x0002002D > +wm 32 0x021b0008 0x00333030 > +wm 32 0x021b000c 0x3F435333 > +wm 32 0x021b0010 0xB68E8B63 > +wm 32 0x021b0014 0x01FF00DB > +wm 32 0x021b0018 0x00001740 > +wm 32 0x021b001c 0x00008000 > +wm 32 0x021b002c 0x000026d2 > +wm 32 0x021b0030 0x00431023 > +wm 32 0x021b0040 0x00000017 > +wm 32 0x021b0000 0x83190000 > +wm 32 0x021b001c 0x04008032 > +wm 32 0x021b001c 0x00008033 > +wm 32 0x021b001c 0x00048031 > +wm 32 0x021b001c 0x05208030 > +wm 32 0x021b001c 0x04008040 > +wm 32 0x021b0020 0x00005800 > +wm 32 0x021b0818 0x00011117 > +wm 32 0x021b0004 0x0002556D > +wm 32 0x021b0404 0x00011006 > +wm 32 0x021b001c 0x00000000 > +wm 32 0x020e0010 0xF00000CF > +wm 32 0x020e0018 0x007F007F > +wm 32 0x020e001c 0x007F007F > diff --git a/arch/arm/boards/advantech-mx6/lowlevel.c b/arch/arm/boards/advantech-mx6/lowlevel.c > new file mode 100644 > index 0000000..8921cd4 > --- /dev/null > +++ b/arch/arm/boards/advantech-mx6/lowlevel.c > @@ -0,0 +1,56 @@ > +/* > + * Copyright (C) 2018 Christoph Fritz > + * > + * This program is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation; either version 2 of > + * the License, or (at your option) any later version. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + */ > + > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > + > +#include > +#include > +#include > +static inline void setup_uart(void) > +{ > + void __iomem *iomuxbase = (void *)MX6_IOMUXC_BASE_ADDR; > + > + imx6_ungate_all_peripherals(); > + > + imx_setup_pad(iomuxbase, MX6Q_PAD_CSI0_DAT10__UART1_TXD); > + > + imx6_uart_setup_ll(); > + > + putc_ll('>'); > +} > + > +extern char __dtb_imx6dl_advantech_rom_7421_start[]; > + > +ENTRY_FUNCTION(start_advantech_imx6dl_rom_7421, r0, r1, r2) > +{ > + imx6_cpu_lowlevel_init(); > + > + relocate_to_current_adr(); > + setup_c(); > + barrier(); > + > + if (IS_ENABLED(CONFIG_DEBUG_LL)) > + setup_uart(); > + > + imx6q_barebox_entry(__dtb_imx6dl_advantech_rom_7421_start); > +} > diff --git a/arch/arm/configs/imx_v7_defconfig b/arch/arm/configs/imx_v7_defconfig > index 62d6238..7a563a5 100644 > --- a/arch/arm/configs/imx_v7_defconfig > +++ b/arch/arm/configs/imx_v7_defconfig > @@ -30,6 +30,7 @@ CONFIG_MACH_UDOO=y > CONFIG_MACH_VARISCITE_MX6=y > CONFIG_MACH_GW_VENTANA=y > CONFIG_MACH_CM_FX6=y > +CONFIG_MACH_ADVANTECH_ROM_742X=y > CONFIG_MACH_PHYTEC_PHYCORE_IMX7=y > CONFIG_IMX_IIM=y > CONFIG_IMX_IIM_FUSE_BLOW=y > diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile > index 0526a6f..f094bdb 100644 > --- a/arch/arm/dts/Makefile > +++ b/arch/arm/dts/Makefile > @@ -7,6 +7,7 @@ endif > # created. > obj- += dummy.o > > +pbl-dtb-$(CONFIG_MACH_ADVANTECH_ROM_742X) += imx6dl-advantech-rom-7421.dtb.o > pbl-dtb-$(CONFIG_MACH_AFI_GF) += am335x-afi-gf.dtb.o > pbl-dtb-$(CONFIG_MACH_BEAGLEBONE) += am335x-bone.dtb.o am335x-boneblack.dtb.o am335x-bone-common.dtb.o > pbl-dtb-$(CONFIG_MACH_CM_FX6) += imx6dl-cm-fx6.dtb.o imx6q-cm-fx6.dtb.o imx6q-utilite.dtb.o > diff --git a/arch/arm/dts/imx6dl-advantech-rom-7421.dts b/arch/arm/dts/imx6dl-advantech-rom-7421.dts > new file mode 100755 > index 0000000..1d5fd89 > --- /dev/null > +++ b/arch/arm/dts/imx6dl-advantech-rom-7421.dts > @@ -0,0 +1,225 @@ > +/* > + * Copyright(c) 2018 Christoph Fritz > + * > + * The code contained herein is licensed under the GNU General Public > + * License. You may obtain a copy of the GNU General Public License > + * Version 2 or later at the following locations: > + * > + * http://www.opensource.org/licenses/gpl-license.html > + * http://www.gnu.org/copyleft/gpl.html > + */ > + > +/dts-v1/; > + > +#include > +#include > +#include "imx6dl.dtsi" > + > +/ { > + model = "Advantech i.MX6 ROM-7421"; > + compatible = "advantech,imx6dl-rom-7421", "fsl,imx6dl"; > + > + chosen { > + stdout-path = &uart1; > + > + environment-sd2 { /* Micro SD */ > + compatible = "barebox,environment"; > + device-path = &usdhc2, "partname:barebox-environment"; > + status = "disabled"; > + }; > + > + environment-sd4 { /* eMMC */ > + compatible = "barebox,environment"; > + device-path = &usdhc4, "partname:barebox-environment"; > + status = "disabled"; > + }; > + > + environment-spi { /* spi nor */ > + compatible = "barebox,environment"; > + device-path = &ecspi1, "partname:barebox-environment"; > + status = "disabled"; > + }; > + }; > +}; > + > +&ecspi1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_ecspi1>; > + fsl,spi-num-chipselects = <1>; > + cs-gpios = <&gpio3 19 0>; > + status = "okay"; > + > + flash: m25p80@0 { > + compatible = "m25p80"; > + spi-max-frequency = <20000000>; > + reg = <0>; > + status = "okay"; > + > + #address-cells = <1>; > + #size-cells = <1>; > + > + partition@0 { > + label = "barebox"; > + reg = <0x0 0xe0000>; > + }; > + > + partition@e0000 { > + label = "barebox-environment"; > + reg = <0xe0000 0x20000>; > + }; > + }; > +}; > + > +&fec { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_enet1>; > + phy-mode = "rgmii"; > + phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; > + fsl,magic-packet; > + status = "okay"; > +}; > + > +&uart1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart1>; > + status = "okay"; > +}; > + > +&usbh1 { > + status = "okay"; > +}; > + > +&usdhc2 { /* Micro SD */ > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_usdhc2>; > + bus-width = <8>; > + cd-gpios = <&gpio2 0 0>; > + status = "okay"; > + > + #address-cells = <1>; > + #size-cells = <1>; > + > + partition@0 { > + label = "barebox"; > + reg = <0x0 0xe0000>; > + }; > + > + partition@e0000 { > + label = "barebox-environment"; > + reg = <0xe0000 0x20000>; > + }; > +}; > + > +&usdhc3 { /* SD Card */ > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_usdhc3>; > + bus-width = <4>; > + cd-gpios = <&gpio2 1 0>; > + en-gpios = <&gpio2 2 0>; > + wp-gpios = <&gpio2 3 0>; > + status = "okay"; > +}; > + > +&usdhc4 { /* eMMC */ > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_usdhc4>; > + bus-width = <8>; > + non-removable; > + no-1-8-v; > + status = "okay"; > + > + #address-cells = <1>; > + #size-cells = <1>; > + > + partition@0 { > + label = "barebox"; > + reg = <0x0 0xe0000>; > + }; > + > + partition@e0000 { > + label = "barebox-environment"; > + reg = <0xe0000 0x20000>; > + }; > +}; > + > +&iomuxc { > + pinctrl-names = "default"; > + > + pinctrl_ecspi1: ecspi1grp { > + fsl,pins = < > + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 > + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 > + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 > + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x80000000 > + >; > + }; > + > + pinctrl_enet1: enet1grp { > + fsl,pins = < > + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 > + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 > + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 > + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 > + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 > + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 > + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 > + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 > + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x0A0B1 > + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 > + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 > + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 > + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 > + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 > + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 > + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x80000000 > + >; > + }; > + > + pinctrl_uart1: uart1grp { > + fsl,pins = < > + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 > + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 > + >; > + }; > + > + pinctrl_usdhc2: usdhc2grp { > + fsl,pins = < > + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 > + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 > + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 > + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 > + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 > + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 > + MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0 > + >; > + }; > + > + pinctrl_usdhc3: usdhc3grp { > + fsl,pins = < > + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 > + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 > + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 > + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 > + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 > + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 > + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 > + MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0 > + MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0 > + >; > + }; > + > + pinctrl_usdhc4: usdhc4grp { > + fsl,pins = < > + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 > + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059 > + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 > + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 > + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 > + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 > + MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059 > + MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059 > + MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059 > + MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 > + >; > + }; > +}; > diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig > index eb135c3..0902ba6 100644 > --- a/arch/arm/mach-imx/Kconfig > +++ b/arch/arm/mach-imx/Kconfig > @@ -383,6 +383,11 @@ config MACH_CM_FX6 > bool "CM FX6" > select ARCH_IMX6 > > +config MACH_ADVANTECH_ROM_742X > + bool "Advantech ROM 742X" > + select ARCH_IMX6 > + select ARM_USE_COMPRESSED_DTB > + > config MACH_WARP7 > bool "NXP i.MX7: element 14 WaRP7 Board" > select ARCH_IMX7 > diff --git a/images/Makefile.imx b/images/Makefile.imx > index 5e0043f..131b3f2 100644 > --- a/images/Makefile.imx > +++ b/images/Makefile.imx > @@ -465,6 +465,11 @@ CFG_start_imx6dl_eltec_hipercam.pblx.imximg = $(board)/eltec-hipercam/flash-head > FILE_barebox-eltec-hipercam.img = start_imx6dl_eltec_hipercam.pblx.imximg > image-$(CONFIG_MACH_ELTEC_HIPERCAM) += barebox-eltec-hipercam.img > > +pblx-$(CONFIG_MACH_ADVANTECH_ROM_742X) += start_advantech_imx6dl_rom_7421 > +CFG_start_advantech_imx6dl_rom_7421.pblx.imximg = $(board)/advantech-mx6/flash-header-advantech-rom-7421.imxcfg > +FILE_barebox-advantech-imx6dl-rom-7421.img = start_advantech_imx6dl_rom_7421.pblx.imximg > +image-$(CONFIG_MACH_ADVANTECH_ROM_742X) += barebox-advantech-imx6dl-rom-7421.img > + > pblx-$(CONFIG_MACH_WARP7) += start_imx7s_element14_warp7 > CFG_start_imx7s_element14_warp7.pblx.imximg = $(board)/element14-warp7/flash-header-mx7-warp.imxcfg > FILE_barebox-element14-imx7s-warp7.img = start_imx7s_element14_warp7.pblx.imximg > -- > 2.1.4 > > > _______________________________________________ > barebox mailing list > barebox@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/barebox > -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox