* [PATCH] net: phy: micrel: fix too late link up
@ 2018-04-12 7:34 Sascha Hauer
0 siblings, 0 replies; only message in thread
From: Sascha Hauer @ 2018-04-12 7:34 UTC (permalink / raw)
To: Barebox List
From: Christian Hemp <c.hemp@phytec.de>
Since commit a4cee7207a1 ("net: phy: micrel: Add workaround for bad
autoneg") by Philipp Zabel <p.zabel@pengutronix.de>:
Based on kernel commit d2fd719bcb0e ("net/phy: micrel: Add workaround
for bad autoneg") by Nathan Sullivan <nathan.sullivan@ni.com>:
Very rarely, the KSZ9031 will appear to complete autonegotiation, but
will drop all traffic afterwards. When this happens, the idle error
count will read 0xFF after autonegotiation completes. Reset the PHY
when in that state.
is it possible that we get the link to late and barebox reports "Network is
down". The problem is that ksz9031_config_init is called again in an
error case. In this case autoneg will restart but waiting for finish is
missing.
Signed-off-by: Christian Hemp <c.hemp@phytec.de>
Tested-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de>
---
drivers/net/phy/micrel.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 0ca359b0ba..fe71bfd1a6 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -293,6 +293,7 @@ static int ksz9031_read_status(struct phy_device *phydev)
if ((regval & 0xff) == 0xff) {
phy_init_hw(phydev);
phydev->link = 0;
+ phy_wait_aneg_done(phydev);
}
return 0;
--
2.16.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2018-04-12 7:34 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-04-12 7:34 [PATCH] net: phy: micrel: fix too late link up Sascha Hauer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox