* [PATCH 00/10] Add initial RISC-V architecture support
@ 2018-04-15 11:28 Antony Pavlov
2018-04-15 11:28 ` [PATCH 01/10] " Antony Pavlov
` (9 more replies)
0 siblings, 10 replies; 15+ messages in thread
From: Antony Pavlov @ 2018-04-15 11:28 UTC (permalink / raw)
To: barebox
This patchseries adds initial RISC-V architecture support for barebox.
See Documentation/boards/riscv.rst for instructions.
You can obtain this patchseries from github:
$ git clone -b 20180415.riscv https://github.com/frantony/barebox
Changes since RFC v4 (20170927)
(http://lists.infradead.org/pipermail/barebox/2017-September/031226.html)
* drop 64-bit support;
* sync with RISC-V linux;
* RISC-V in barebox now is little endian only;
* fix according to notes by Oleksij Rempel.
Changes since RFC v3 (20161212)
(http://lists.infradead.org/pipermail/barebox/2016-December/028716.html)
* drop SiFive support, add support for custom Erizo SoC;
* barebox runs on real hardware (e.g. DE0-Nano FPGA board,
see https://github.com/miet-riscv-workgroup/rv32-simple-soc for
details);
* introduce NMON for RISC-V;
* add relocator to start.S.
Changes since RFC v2 (20161113)
(http://lists.infradead.org/pipermail/barebox/2016-November/028533.html):
* add RV32 support.
Changes since RFC v1 (20161013)
(http://lists.infradead.org/pipermail/barebox/2016-October/028309.html):
* drop spike pk support;
* add qemu-sifive board support;
* add Documentation/boards/riscv.rst;
* fix guard macro names
Antony Pavlov (10):
Add initial RISC-V architecture support
RISC-V: add Erizo SoC support
RISC-V: add low-level debug macros for ns16550
RISC-V: add nmon nano-monitor
RISC-V: erizo: add DEBUG_LL support
RISC-V: erizo: enable NMON
RISC-V: erizo: add nmon image creation
RISC-V: add erizo_generic_defconfig
scripts: add nmon-loader
Documentation: add RISC-V docs
Documentation/boards/riscv.rst | 106 ++++++++
arch/riscv/Kconfig | 99 ++++++++
arch/riscv/Makefile | 86 +++++++
arch/riscv/boards/erizo-generic/.gitignore | 1 +
arch/riscv/boards/erizo-generic/Makefile | 1 +
arch/riscv/boards/erizo-generic/board.c | 28 +++
arch/riscv/boot/Makefile | 2 +
arch/riscv/boot/main_entry.c | 40 +++
arch/riscv/boot/start.S | 76 ++++++
arch/riscv/configs/erizo_generic_defconfig | 53 ++++
arch/riscv/dts/.gitignore | 1 +
arch/riscv/dts/Makefile | 9 +
arch/riscv/dts/erizo.dtsi | 46 ++++
arch/riscv/dts/erizo_generic.dts | 32 +++
arch/riscv/dts/skeleton.dtsi | 13 +
arch/riscv/include/asm/barebox.h | 1 +
arch/riscv/include/asm/bitops.h | 35 +++
arch/riscv/include/asm/bitsperlong.h | 10 +
arch/riscv/include/asm/byteorder.h | 6 +
arch/riscv/include/asm/common.h | 6 +
arch/riscv/include/asm/debug_ll_ns16550.h | 186 ++++++++++++++
arch/riscv/include/asm/elf.h | 11 +
arch/riscv/include/asm/io.h | 8 +
arch/riscv/include/asm/mmu.h | 6 +
arch/riscv/include/asm/posix_types.h | 1 +
arch/riscv/include/asm/riscv_nmon.h | 234 ++++++++++++++++++
arch/riscv/include/asm/sections.h | 1 +
arch/riscv/include/asm/string.h | 1 +
arch/riscv/include/asm/swab.h | 6 +
arch/riscv/include/asm/types.h | 60 +++++
arch/riscv/include/asm/unaligned.h | 19 ++
arch/riscv/lib/.gitignore | 1 +
arch/riscv/lib/Makefile | 9 +
arch/riscv/lib/ashldi3.c | 28 +++
arch/riscv/lib/ashrdi3.c | 30 +++
arch/riscv/lib/asm-offsets.c | 12 +
arch/riscv/lib/barebox.lds.S | 89 +++++++
arch/riscv/lib/dtb.c | 41 +++
arch/riscv/lib/libgcc.h | 29 +++
arch/riscv/lib/lshrdi3.c | 28 +++
arch/riscv/lib/riscv_timer.c | 67 +++++
arch/riscv/mach-erizo/Kconfig | 11 +
arch/riscv/mach-erizo/Makefile | 3 +
arch/riscv/mach-erizo/include/mach/debug_ll.h | 37 +++
drivers/of/Kconfig | 2 +-
scripts/erizo-nmon-image | 3 +
scripts/nmon-loader | 31 +++
47 files changed, 1604 insertions(+), 1 deletion(-)
create mode 100644 Documentation/boards/riscv.rst
create mode 100644 arch/riscv/Kconfig
create mode 100644 arch/riscv/Makefile
create mode 100644 arch/riscv/boards/erizo-generic/.gitignore
create mode 100644 arch/riscv/boards/erizo-generic/Makefile
create mode 100644 arch/riscv/boards/erizo-generic/board.c
create mode 100644 arch/riscv/boot/Makefile
create mode 100644 arch/riscv/boot/main_entry.c
create mode 100644 arch/riscv/boot/start.S
create mode 100644 arch/riscv/configs/erizo_generic_defconfig
create mode 100644 arch/riscv/dts/.gitignore
create mode 100644 arch/riscv/dts/Makefile
create mode 100644 arch/riscv/dts/erizo.dtsi
create mode 100644 arch/riscv/dts/erizo_generic.dts
create mode 100644 arch/riscv/dts/skeleton.dtsi
create mode 100644 arch/riscv/include/asm/barebox.h
create mode 100644 arch/riscv/include/asm/bitops.h
create mode 100644 arch/riscv/include/asm/bitsperlong.h
create mode 100644 arch/riscv/include/asm/byteorder.h
create mode 100644 arch/riscv/include/asm/common.h
create mode 100644 arch/riscv/include/asm/debug_ll_ns16550.h
create mode 100644 arch/riscv/include/asm/elf.h
create mode 100644 arch/riscv/include/asm/io.h
create mode 100644 arch/riscv/include/asm/mmu.h
create mode 100644 arch/riscv/include/asm/posix_types.h
create mode 100644 arch/riscv/include/asm/riscv_nmon.h
create mode 100644 arch/riscv/include/asm/sections.h
create mode 100644 arch/riscv/include/asm/string.h
create mode 100644 arch/riscv/include/asm/swab.h
create mode 100644 arch/riscv/include/asm/types.h
create mode 100644 arch/riscv/include/asm/unaligned.h
create mode 100644 arch/riscv/lib/.gitignore
create mode 100644 arch/riscv/lib/Makefile
create mode 100644 arch/riscv/lib/ashldi3.c
create mode 100644 arch/riscv/lib/ashrdi3.c
create mode 100644 arch/riscv/lib/asm-offsets.c
create mode 100644 arch/riscv/lib/barebox.lds.S
create mode 100644 arch/riscv/lib/dtb.c
create mode 100644 arch/riscv/lib/libgcc.h
create mode 100644 arch/riscv/lib/lshrdi3.c
create mode 100644 arch/riscv/lib/riscv_timer.c
create mode 100644 arch/riscv/mach-erizo/Kconfig
create mode 100644 arch/riscv/mach-erizo/Makefile
create mode 100644 arch/riscv/mach-erizo/include/mach/debug_ll.h
create mode 100755 scripts/erizo-nmon-image
create mode 100755 scripts/nmon-loader
--
2.17.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH 01/10] Add initial RISC-V architecture support
2018-04-15 11:28 [PATCH 00/10] Add initial RISC-V architecture support Antony Pavlov
@ 2018-04-15 11:28 ` Antony Pavlov
2018-04-17 6:22 ` Sascha Hauer
2018-04-15 11:28 ` [PATCH 02/10] RISC-V: add Erizo SoC support Antony Pavlov
` (8 subsequent siblings)
9 siblings, 1 reply; 15+ messages in thread
From: Antony Pavlov @ 2018-04-15 11:28 UTC (permalink / raw)
To: barebox
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
---
arch/riscv/Kconfig | 62 +++++++++++++++++++
arch/riscv/Makefile | 72 ++++++++++++++++++++++
arch/riscv/boot/Makefile | 2 +
arch/riscv/boot/main_entry.c | 40 +++++++++++++
arch/riscv/boot/start.S | 63 ++++++++++++++++++++
arch/riscv/dts/.gitignore | 1 +
arch/riscv/dts/Makefile | 9 +++
arch/riscv/dts/skeleton.dtsi | 13 ++++
arch/riscv/include/asm/barebox.h | 1 +
arch/riscv/include/asm/bitops.h | 35 +++++++++++
arch/riscv/include/asm/bitsperlong.h | 10 ++++
arch/riscv/include/asm/byteorder.h | 6 ++
arch/riscv/include/asm/common.h | 6 ++
arch/riscv/include/asm/elf.h | 11 ++++
arch/riscv/include/asm/io.h | 8 +++
arch/riscv/include/asm/mmu.h | 6 ++
arch/riscv/include/asm/posix_types.h | 1 +
arch/riscv/include/asm/sections.h | 1 +
arch/riscv/include/asm/string.h | 1 +
arch/riscv/include/asm/swab.h | 6 ++
arch/riscv/include/asm/types.h | 60 +++++++++++++++++++
arch/riscv/include/asm/unaligned.h | 19 ++++++
arch/riscv/lib/.gitignore | 1 +
arch/riscv/lib/Makefile | 9 +++
arch/riscv/lib/ashldi3.c | 28 +++++++++
arch/riscv/lib/ashrdi3.c | 30 ++++++++++
arch/riscv/lib/asm-offsets.c | 12 ++++
arch/riscv/lib/barebox.lds.S | 89 ++++++++++++++++++++++++++++
arch/riscv/lib/dtb.c | 41 +++++++++++++
arch/riscv/lib/libgcc.h | 29 +++++++++
arch/riscv/lib/lshrdi3.c | 28 +++++++++
arch/riscv/lib/riscv_timer.c | 67 +++++++++++++++++++++
drivers/of/Kconfig | 2 +-
33 files changed, 768 insertions(+), 1 deletion(-)
diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
new file mode 100644
index 0000000000..d65e87acd8
--- /dev/null
+++ b/arch/riscv/Kconfig
@@ -0,0 +1,62 @@
+config RISCV
+ def_bool y
+ select GENERIC_FIND_NEXT_BIT
+ select HAVE_CONFIGURABLE_MEMORY_LAYOUT
+ select HAVE_CONFIGURABLE_TEXT_BASE
+ select GPIOLIB
+ select OFTREE
+ select COMMON_CLK
+ select COMMON_CLK_OF_PROVIDER
+ select CLKDEV_LOOKUP
+
+config ARCH_TEXT_BASE
+ hex
+ default 0x0
+
+config GENERIC_LINKER_SCRIPT
+ def_bool y
+
+menu "Machine selection"
+
+choice
+ prompt "Base ISA"
+ default ARCH_RV32I
+
+config ARCH_RV32I
+ bool "RV32I"
+ select CPU_SUPPORTS_32BIT_KERNEL
+
+endchoice
+
+config CPU_SUPPORTS_32BIT_KERNEL
+ bool
+
+choice
+ prompt "barebox code model"
+ default 32BIT
+
+config 32BIT
+ bool "32-bit barebox"
+ depends on CPU_SUPPORTS_32BIT_KERNEL
+ help
+ Select this option to build a 32-bit barebox.
+
+endchoice
+
+config BUILTIN_DTB
+ bool "link a DTB into the barebox image"
+ depends on OFTREE
+
+config BUILTIN_DTB_NAME
+ string "DTB to build into the barebox image"
+ depends on BUILTIN_DTB
+
+endmenu
+
+source common/Kconfig
+source commands/Kconfig
+source net/Kconfig
+source drivers/Kconfig
+source fs/Kconfig
+source lib/Kconfig
+source crypto/Kconfig
diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile
new file mode 100644
index 0000000000..e9c407354c
--- /dev/null
+++ b/arch/riscv/Makefile
@@ -0,0 +1,72 @@
+CPPFLAGS += -fno-strict-aliasing
+
+ifeq ($(CONFIG_ARCH_RV32I),y)
+ cflags-y += -march=rv32im
+endif
+
+cflags-y += -fno-pic -pipe
+cflags-y += -Wall -Wmissing-prototypes -Wstrict-prototypes \
+ -Wno-uninitialized -Wno-format -Wno-main -mcmodel=medany
+
+LDFLAGS += $(ldflags-y)
+LDFLAGS_barebox += -nostdlib
+
+TEXT_BASE = $(CONFIG_TEXT_BASE)
+CPPFLAGS += -DTEXT_BASE=$(CONFIG_TEXT_BASE)
+
+ifndef CONFIG_MODULES
+# Add cleanup flags
+CPPFLAGS += -fdata-sections -ffunction-sections
+LDFLAGS_barebox += -static --gc-sections
+endif
+
+KBUILD_BINARY := barebox.bin
+
+machdirs := $(patsubst %,arch/riscv/mach-%/,$(machine-y))
+
+ifneq ($(board-y),)
+BOARD := arch/riscv/boards/$(board-y)/
+else
+BOARD :=
+endif
+
+ifeq ($(KBUILD_SRC),)
+CPPFLAGS += -I$(BOARD)/include
+else
+CPPFLAGS += -I$(srctree)/$(BOARD)/include
+endif
+
+ifeq ($(KBUILD_SRC),)
+CPPFLAGS += $(patsubst %,-I%include,$(machdirs))
+else
+CPPFLAGS += $(patsubst %,-I$(srctree)/%include,$(machdirs))
+endif
+
+archprepare: maketools
+
+PHONY += maketools
+
+ifneq ($(machine-y),)
+MACH := arch/riscv/mach-$(machine-y)/
+else
+MACH :=
+endif
+
+ifneq ($(board-y),)
+BOARD := arch/riscv/boards/$(board-y)/
+else
+BOARD :=
+endif
+
+common-y += $(BOARD) $(MACH)
+common-y += arch/riscv/lib/
+common-y += arch/riscv/boot/
+
+common-$(CONFIG_OFTREE) += arch/riscv/dts/
+
+CPPFLAGS += $(cflags-y)
+CFLAGS += $(cflags-y)
+
+lds-y := arch/riscv/lib/barebox.lds
+
+CLEAN_FILES += arch/riscv/lib/barebox.lds
diff --git a/arch/riscv/boot/Makefile b/arch/riscv/boot/Makefile
new file mode 100644
index 0000000000..d6d28ce652
--- /dev/null
+++ b/arch/riscv/boot/Makefile
@@ -0,0 +1,2 @@
+obj-y += start.o
+obj-y += main_entry.o
diff --git a/arch/riscv/boot/main_entry.c b/arch/riscv/boot/main_entry.c
new file mode 100644
index 0000000000..18db86da58
--- /dev/null
+++ b/arch/riscv/boot/main_entry.c
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2016 Antony Pavlov <antonynpavlov@gmail.com>
+ *
+ * This file is part of barebox.
+ * See file CREDITS for list of people who contributed to this project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <common.h>
+#include <memory.h>
+#include <asm-generic/memory_layout.h>
+#include <asm/sections.h>
+
+void main_entry(void);
+
+/**
+ * Called plainly from assembler code
+ *
+ * @note The C environment isn't initialized yet
+ */
+void main_entry(void)
+{
+ /* clear the BSS first */
+ memset(__bss_start, 0x00, __bss_stop - __bss_start);
+
+ mem_malloc_init((void *)MALLOC_BASE,
+ (void *)(MALLOC_BASE + MALLOC_SIZE - 1));
+
+ start_barebox();
+}
diff --git a/arch/riscv/boot/start.S b/arch/riscv/boot/start.S
new file mode 100644
index 0000000000..be3aed1507
--- /dev/null
+++ b/arch/riscv/boot/start.S
@@ -0,0 +1,63 @@
+/*
+ * Startup Code for RISC-V CPU
+ *
+ * based on coreboot/src/arch/riscv/bootblock.S
+ *
+ * Copyright (C) 2016 Antony Pavlov <antonynpavlov@gmail.com>
+ *
+ * This file is part of barebox.
+ * See file CREDITS for list of people who contributed to this project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <asm-generic/memory_layout.h>
+
+ .text
+ .section ".text_entry"
+ .align 2
+
+.globl _start
+_start:
+ li sp, STACK_BASE + STACK_SIZE
+
+ /* copy barebox to link location */
+
+ la a0, _start /* a0 <- _start actual address */
+ li a1, CONFIG_TEXT_BASE /* a1 <- _start link address */
+
+ beq a0, a1, main_entry
+
+ la a2, __bss_start
+
+#define LONGSIZE 4
+
+copy_loop:
+ /* copy from source address [a0] */
+ lw t0, LONGSIZE * 0(a0)
+ lw t1, LONGSIZE * 1(a0)
+ lw t2, LONGSIZE * 2(a0)
+ lw t3, LONGSIZE * 3(a0)
+ /* copy to target address [a1] */
+ sw t0, LONGSIZE * 0(a1)
+ sw t1, LONGSIZE * 1(a1)
+ sw t2, LONGSIZE * 2(a1)
+ sw t3, LONGSIZE * 3(a1)
+ addi a0, a0, LONGSIZE * 4
+ addi a1, a1, LONGSIZE * 4
+ bgeu a2, a0, copy_loop
+
+ /* Alas! At the moment I can't load main_entry __link__ address
+ into a0 with la. Use CONFIG_TEXT_BASE instead. This solution
+ leads to extra cycles for repeat sp initialization. */
+
+ li a0, CONFIG_TEXT_BASE
+ jalr a0
diff --git a/arch/riscv/dts/.gitignore b/arch/riscv/dts/.gitignore
new file mode 100644
index 0000000000..077903c50a
--- /dev/null
+++ b/arch/riscv/dts/.gitignore
@@ -0,0 +1 @@
+*dtb*
diff --git a/arch/riscv/dts/Makefile b/arch/riscv/dts/Makefile
new file mode 100644
index 0000000000..f8380b11c9
--- /dev/null
+++ b/arch/riscv/dts/Makefile
@@ -0,0 +1,9 @@
+BUILTIN_DTB := $(patsubst "%",%,$(CONFIG_BUILTIN_DTB_NAME))
+obj-$(CONFIG_BUILTIN_DTB) += $(BUILTIN_DTB).dtb.o
+
+# just to build a built-in.o. Otherwise compilation fails when no devicetree is
+# created.
+obj- += dummy.o
+
+always := $(dtb-y)
+clean-files := *.dtb *.dtb.S .*.dtc .*.pre .*.dts
diff --git a/arch/riscv/dts/skeleton.dtsi b/arch/riscv/dts/skeleton.dtsi
new file mode 100644
index 0000000000..38ead821bb
--- /dev/null
+++ b/arch/riscv/dts/skeleton.dtsi
@@ -0,0 +1,13 @@
+/*
+ * Skeleton device tree; the bare minimum needed to boot; just include and
+ * add a compatible value. The bootloader will typically populate the memory
+ * node.
+ */
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ chosen { };
+ aliases { };
+ memory { device_type = "memory"; reg = <0 0 0>; };
+};
diff --git a/arch/riscv/include/asm/barebox.h b/arch/riscv/include/asm/barebox.h
new file mode 100644
index 0000000000..2997587d82
--- /dev/null
+++ b/arch/riscv/include/asm/barebox.h
@@ -0,0 +1 @@
+/* dummy */
diff --git a/arch/riscv/include/asm/bitops.h b/arch/riscv/include/asm/bitops.h
new file mode 100644
index 0000000000..e77ab83202
--- /dev/null
+++ b/arch/riscv/include/asm/bitops.h
@@ -0,0 +1,35 @@
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ *
+ */
+
+#ifndef _ASM_BITOPS_H_
+#define _ASM_BITOPS_H_
+
+#include <asm-generic/bitops/__ffs.h>
+#include <asm-generic/bitops/__fls.h>
+#include <asm-generic/bitops/ffs.h>
+#include <asm-generic/bitops/fls.h>
+#include <asm-generic/bitops/ffz.h>
+#include <asm-generic/bitops/hweight.h>
+#include <asm-generic/bitops/fls64.h>
+#include <asm-generic/bitops/find.h>
+#include <asm-generic/bitops/ops.h>
+
+#define set_bit(x, y) __set_bit(x, y)
+#define clear_bit(x, y) __clear_bit(x, y)
+#define change_bit(x, y) __change_bit(x, y)
+#define test_and_set_bit(x, y) __test_and_set_bit(x, y)
+#define test_and_clear_bit(x, y) __test_and_clear_bit(x, y)
+#define test_and_change_bit(x, y) __test_and_change_bit(x, y)
+
+#endif /* _ASM_BITOPS_H_ */
diff --git a/arch/riscv/include/asm/bitsperlong.h b/arch/riscv/include/asm/bitsperlong.h
new file mode 100644
index 0000000000..4641e7e485
--- /dev/null
+++ b/arch/riscv/include/asm/bitsperlong.h
@@ -0,0 +1,10 @@
+#ifndef __ASM_BITSPERLONG_H
+#define __ASM_BITSPERLONG_H
+
+#ifdef __riscv64
+#define BITS_PER_LONG 64
+#else
+#define BITS_PER_LONG 32
+#endif
+
+#endif /* __ASM_BITSPERLONG_H */
diff --git a/arch/riscv/include/asm/byteorder.h b/arch/riscv/include/asm/byteorder.h
new file mode 100644
index 0000000000..0be826927b
--- /dev/null
+++ b/arch/riscv/include/asm/byteorder.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_RISCV_BYTEORDER_H
+#define _ASM_RISCV_BYTEORDER_H
+
+#include <linux/byteorder/little_endian.h>
+
+#endif /* _ASM_RISCV_BYTEORDER_H */
diff --git a/arch/riscv/include/asm/common.h b/arch/riscv/include/asm/common.h
new file mode 100644
index 0000000000..bc8a17e30b
--- /dev/null
+++ b/arch/riscv/include/asm/common.h
@@ -0,0 +1,6 @@
+#ifndef ASM_RISCV_COMMON_H
+#define ASM_RISCV_COMMON_H
+
+/* nothing special yet */
+
+#endif /* ASM_RISCV_COMMON_H */
diff --git a/arch/riscv/include/asm/elf.h b/arch/riscv/include/asm/elf.h
new file mode 100644
index 0000000000..7134fa0582
--- /dev/null
+++ b/arch/riscv/include/asm/elf.h
@@ -0,0 +1,11 @@
+#ifndef __ASM_RISCV_ELF_H__
+#define __ASM_RISCV_ELF_H__
+
+#if __SIZEOF_POINTER__ == 8
+#define ELF_CLASS ELFCLASS64
+#define CONFIG_PHYS_ADDR_T_64BIT
+#else
+#define ELF_CLASS ELFCLASS32
+#endif
+
+#endif /* __ASM_RISCV_ELF_H__ */
diff --git a/arch/riscv/include/asm/io.h b/arch/riscv/include/asm/io.h
new file mode 100644
index 0000000000..3cdea7fcac
--- /dev/null
+++ b/arch/riscv/include/asm/io.h
@@ -0,0 +1,8 @@
+#ifndef __ASM_RISCV_IO_H
+#define __ASM_RISCV_IO_H
+
+#define IO_SPACE_LIMIT 0
+
+#include <asm-generic/io.h>
+
+#endif /* __ASM_RISCV_IO_H */
diff --git a/arch/riscv/include/asm/mmu.h b/arch/riscv/include/asm/mmu.h
new file mode 100644
index 0000000000..95af871420
--- /dev/null
+++ b/arch/riscv/include/asm/mmu.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_MMU_H
+#define __ASM_MMU_H
+
+#define MAP_ARCH_DEFAULT MAP_UNCACHED
+
+#endif /* __ASM_MMU_H */
diff --git a/arch/riscv/include/asm/posix_types.h b/arch/riscv/include/asm/posix_types.h
new file mode 100644
index 0000000000..22cae6230c
--- /dev/null
+++ b/arch/riscv/include/asm/posix_types.h
@@ -0,0 +1 @@
+#include <asm-generic/posix_types.h>
diff --git a/arch/riscv/include/asm/sections.h b/arch/riscv/include/asm/sections.h
new file mode 100644
index 0000000000..2b8c516038
--- /dev/null
+++ b/arch/riscv/include/asm/sections.h
@@ -0,0 +1 @@
+#include <asm-generic/sections.h>
diff --git a/arch/riscv/include/asm/string.h b/arch/riscv/include/asm/string.h
new file mode 100644
index 0000000000..2997587d82
--- /dev/null
+++ b/arch/riscv/include/asm/string.h
@@ -0,0 +1 @@
+/* dummy */
diff --git a/arch/riscv/include/asm/swab.h b/arch/riscv/include/asm/swab.h
new file mode 100644
index 0000000000..60a90120b6
--- /dev/null
+++ b/arch/riscv/include/asm/swab.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SWAB_H
+#define _ASM_SWAB_H
+
+/* nothing. use generic functions */
+
+#endif /* _ASM_SWAB_H */
diff --git a/arch/riscv/include/asm/types.h b/arch/riscv/include/asm/types.h
new file mode 100644
index 0000000000..ba386ab4c5
--- /dev/null
+++ b/arch/riscv/include/asm/types.h
@@ -0,0 +1,60 @@
+#ifndef __ASM_RISCV_TYPES_H
+#define __ASM_RISCV_TYPES_H
+
+#ifdef __riscv64
+/*
+ * This is used in dlmalloc. On RISCV64 we need it to be 64 bit
+ */
+#define INTERNAL_SIZE_T unsigned long
+
+/*
+ * This is a Kconfig variable in the Kernel, but we want to detect
+ * this during compile time, so we set it here.
+ */
+#define CONFIG_PHYS_ADDR_T_64BIT
+
+#endif
+
+typedef unsigned short umode_t;
+
+/*
+ * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
+ * header files exported to user space
+ */
+
+typedef __signed__ char __s8;
+typedef unsigned char __u8;
+
+typedef __signed__ short __s16;
+typedef unsigned short __u16;
+
+typedef __signed__ int __s32;
+typedef unsigned int __u32;
+
+#if defined(__GNUC__) && !defined(__STRICT_ANSI__)
+typedef __signed__ long long __s64;
+typedef unsigned long long __u64;
+#endif
+
+/*
+ * These aren't exported outside the kernel to avoid name space clashes
+ */
+#ifdef __KERNEL__
+
+typedef signed char s8;
+typedef unsigned char u8;
+
+typedef signed short s16;
+typedef unsigned short u16;
+
+typedef signed int s32;
+typedef unsigned int u32;
+
+typedef signed long long s64;
+typedef unsigned long long u64;
+
+#include <asm/bitsperlong.h>
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASM_RISCV_TYPES_H */
diff --git a/arch/riscv/include/asm/unaligned.h b/arch/riscv/include/asm/unaligned.h
new file mode 100644
index 0000000000..aaebc06411
--- /dev/null
+++ b/arch/riscv/include/asm/unaligned.h
@@ -0,0 +1,19 @@
+#ifndef _ASM_RISCV_UNALIGNED_H
+#define _ASM_RISCV_UNALIGNED_H
+
+/*
+ * FIXME: this file is copy-n-pasted from sandbox's unaligned.h
+ */
+
+#include <linux/unaligned/access_ok.h>
+#include <linux/unaligned/generic.h>
+
+#if __BYTE_ORDER == __LITTLE_ENDIAN
+#define get_unaligned __get_unaligned_le
+#define put_unaligned __put_unaligned_le
+#else
+#define get_unaligned __get_unaligned_be
+#define put_unaligned __put_unaligned_be
+#endif
+
+#endif /* _ASM_RISCV_UNALIGNED_H */
diff --git a/arch/riscv/lib/.gitignore b/arch/riscv/lib/.gitignore
new file mode 100644
index 0000000000..d1165788c9
--- /dev/null
+++ b/arch/riscv/lib/.gitignore
@@ -0,0 +1 @@
+barebox.lds
diff --git a/arch/riscv/lib/Makefile b/arch/riscv/lib/Makefile
new file mode 100644
index 0000000000..313363c1a5
--- /dev/null
+++ b/arch/riscv/lib/Makefile
@@ -0,0 +1,9 @@
+extra-$(CONFIG_GENERIC_LINKER_SCRIPT) += barebox.lds
+
+obj-y += riscv_timer.o
+
+obj-$(CONFIG_32BIT) += lshrdi3.o
+obj-$(CONFIG_32BIT) += ashldi3.o
+obj-$(CONFIG_32BIT) += ashrdi3.o
+
+obj-$(CONFIG_BUILTIN_DTB) += dtb.o
diff --git a/arch/riscv/lib/ashldi3.c b/arch/riscv/lib/ashldi3.c
new file mode 100644
index 0000000000..cbdbcbb6a9
--- /dev/null
+++ b/arch/riscv/lib/ashldi3.c
@@ -0,0 +1,28 @@
+#include <module.h>
+
+#include "libgcc.h"
+
+long long __ashldi3(long long u, word_type b)
+{
+ DWunion uu, w;
+ word_type bm;
+
+ if (b == 0)
+ return u;
+
+ uu.ll = u;
+ bm = 32 - b;
+
+ if (bm <= 0) {
+ w.s.low = 0;
+ w.s.high = (unsigned int) uu.s.low << -bm;
+ } else {
+ const unsigned int carries = (unsigned int) uu.s.low >> bm;
+
+ w.s.low = (unsigned int) uu.s.low << b;
+ w.s.high = ((unsigned int) uu.s.high << b) | carries;
+ }
+
+ return w.ll;
+}
+EXPORT_SYMBOL(__ashldi3);
diff --git a/arch/riscv/lib/ashrdi3.c b/arch/riscv/lib/ashrdi3.c
new file mode 100644
index 0000000000..928d6d97ce
--- /dev/null
+++ b/arch/riscv/lib/ashrdi3.c
@@ -0,0 +1,30 @@
+#include <module.h>
+
+#include "libgcc.h"
+
+long long __ashrdi3(long long u, word_type b)
+{
+ DWunion uu, w;
+ word_type bm;
+
+ if (b == 0)
+ return u;
+
+ uu.ll = u;
+ bm = 32 - b;
+
+ if (bm <= 0) {
+ /* w.s.high = 1..1 or 0..0 */
+ w.s.high =
+ uu.s.high >> 31;
+ w.s.low = uu.s.high >> -bm;
+ } else {
+ const unsigned int carries = (unsigned int) uu.s.high << bm;
+
+ w.s.high = uu.s.high >> b;
+ w.s.low = ((unsigned int) uu.s.low >> b) | carries;
+ }
+
+ return w.ll;
+}
+EXPORT_SYMBOL(__ashrdi3);
diff --git a/arch/riscv/lib/asm-offsets.c b/arch/riscv/lib/asm-offsets.c
new file mode 100644
index 0000000000..22f382b71e
--- /dev/null
+++ b/arch/riscv/lib/asm-offsets.c
@@ -0,0 +1,12 @@
+/*
+ * Generate definitions needed by assembly language modules.
+ * This code generates raw asm output which is post-processed to extract
+ * and format the required data.
+ */
+
+#include <linux/kbuild.h>
+
+int main(void)
+{
+ return 0;
+}
diff --git a/arch/riscv/lib/barebox.lds.S b/arch/riscv/lib/barebox.lds.S
new file mode 100644
index 0000000000..9468fb8b5e
--- /dev/null
+++ b/arch/riscv/lib/barebox.lds.S
@@ -0,0 +1,89 @@
+/*
+ * Copyright (C) 2016 Antony Pavlov <antonynpavlov@gmail.com>
+ *
+ * This file is part of barebox.
+ * See file CREDITS for list of people who contributed to this project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <asm-generic/barebox.lds.h>
+
+OUTPUT_ARCH(riscv)
+ENTRY(_start)
+SECTIONS
+{
+ . = TEXT_BASE;
+
+ . = ALIGN(8);
+ .text :
+ {
+ _stext = .;
+ _start = .;
+ KEEP(*(.text_entry*))
+ _text = .;
+ __bare_init_start = .;
+ *(.text_bare_init*)
+ __bare_init_end = .;
+ *(.text*)
+ }
+ BAREBOX_BARE_INIT_SIZE
+
+ PRE_IMAGE
+
+ . = ALIGN(8);
+ .rodata : { *(.rodata*) }
+
+ _etext = .; /* End of text and rodata section */
+ _sdata = .;
+
+ . = ALIGN(8);
+ .data : { *(.data*) }
+
+ .barebox_imd : { BAREBOX_IMD }
+
+ . = ALIGN(8);
+ .got : { *(.got*) }
+
+ . = .;
+ __barebox_cmd_start = .;
+ .barebox_cmd : { BAREBOX_CMDS }
+ __barebox_cmd_end = .;
+
+ __barebox_magicvar_start = .;
+ .barebox_magicvar : { BAREBOX_MAGICVARS }
+ __barebox_magicvar_end = .;
+
+ __barebox_initcalls_start = .;
+ .barebox_initcalls : { INITCALLS }
+ __barebox_initcalls_end = .;
+
+ __barebox_exitcalls_start = .;
+ .barebox_exitcalls : { EXITCALLS }
+ __barebox_exitcalls_end = .;
+
+ __usymtab_start = .;
+ __usymtab : { BAREBOX_SYMS }
+ __usymtab_end = .;
+
+ .rela.dyn : { *(.rela*) }
+
+ .oftables : { BAREBOX_CLK_TABLE() }
+
+ .dtb : { BAREBOX_DTB() }
+
+ _edata = .;
+ . = ALIGN(8);
+ __bss_start = .;
+ .bss : { *(.bss*) *(.sbss*) }
+ __bss_stop = .;
+ _end = .;
+}
diff --git a/arch/riscv/lib/dtb.c b/arch/riscv/lib/dtb.c
new file mode 100644
index 0000000000..09f519dcc2
--- /dev/null
+++ b/arch/riscv/lib/dtb.c
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2016 Antony Pavlov <antonynpavlov@gmail.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+#include <common.h>
+#include <init.h>
+#include <of.h>
+
+extern char __dtb_start[];
+
+static int of_riscv_init(void)
+{
+ struct device_node *root;
+
+ root = of_get_root_node();
+ if (root)
+ return 0;
+
+ root = of_unflatten_dtb(__dtb_start);
+ if (!IS_ERR(root)) {
+ pr_debug("using internal DTB\n");
+ of_set_root_node(root);
+ if (IS_ENABLED(CONFIG_OFDEVICE))
+ of_probe();
+ }
+
+ return 0;
+}
+core_initcall(of_riscv_init);
diff --git a/arch/riscv/lib/libgcc.h b/arch/riscv/lib/libgcc.h
new file mode 100644
index 0000000000..593e598022
--- /dev/null
+++ b/arch/riscv/lib/libgcc.h
@@ -0,0 +1,29 @@
+#ifndef __ASM_LIBGCC_H
+#define __ASM_LIBGCC_H
+
+#include <asm/byteorder.h>
+
+typedef int word_type __attribute__ ((mode (__word__)));
+
+#ifdef __BIG_ENDIAN
+struct DWstruct {
+ int high, low;
+};
+#elif defined(__LITTLE_ENDIAN)
+struct DWstruct {
+ int low, high;
+};
+#else
+#error I feel sick.
+#endif
+
+typedef union {
+ struct DWstruct s;
+ long long ll;
+} DWunion;
+
+long long __lshrdi3(long long u, word_type b);
+long long __ashldi3(long long u, word_type b);
+long long __ashrdi3(long long u, word_type b);
+
+#endif /* __ASM_LIBGCC_H */
diff --git a/arch/riscv/lib/lshrdi3.c b/arch/riscv/lib/lshrdi3.c
new file mode 100644
index 0000000000..74a4846e97
--- /dev/null
+++ b/arch/riscv/lib/lshrdi3.c
@@ -0,0 +1,28 @@
+#include <module.h>
+
+#include "libgcc.h"
+
+long long __lshrdi3(long long u, word_type b)
+{
+ DWunion uu, w;
+ word_type bm;
+
+ if (b == 0)
+ return u;
+
+ uu.ll = u;
+ bm = 32 - b;
+
+ if (bm <= 0) {
+ w.s.high = 0;
+ w.s.low = (unsigned int) uu.s.high >> -bm;
+ } else {
+ const unsigned int carries = (unsigned int) uu.s.high << bm;
+
+ w.s.high = (unsigned int) uu.s.high >> b;
+ w.s.low = ((unsigned int) uu.s.low >> b) | carries;
+ }
+
+ return w.ll;
+}
+EXPORT_SYMBOL(__lshrdi3);
diff --git a/arch/riscv/lib/riscv_timer.c b/arch/riscv/lib/riscv_timer.c
new file mode 100644
index 0000000000..0bae8e9a89
--- /dev/null
+++ b/arch/riscv/lib/riscv_timer.c
@@ -0,0 +1,67 @@
+/*
+ * Copyright (C) 2017 Antony Pavlov <antonynpavlov@gmail.com>
+ *
+ * This file is part of barebox.
+ * See file CREDITS for list of people who contributed to this project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+/**
+ * @file
+ * @brief Clocksource based on RISCV cycle CSR timer
+ */
+
+#include <init.h>
+#include <of.h>
+#include <linux/clk.h>
+#include <clock.h>
+
+static uint64_t rdcycle_read(void)
+{
+ register unsigned long __v;
+
+ __asm__ __volatile__ ("rdcycle %0" : "=r" (__v));
+
+ return __v;
+}
+
+static struct clocksource rdcycle_cs = {
+ .read = rdcycle_read,
+ .mask = CLOCKSOURCE_MASK(32),
+};
+
+static int rdcycle_cs_init(void)
+{
+ unsigned int cycle_frequency;
+
+ /* default rate: 100 MHz */
+ cycle_frequency = 100000000;
+
+ if (IS_ENABLED(CONFIG_OFTREE)) {
+ struct device_node *np;
+ struct clk *clk;
+
+ np = of_get_cpu_node(0, NULL);
+ if (np) {
+ clk = of_clk_get(np, 0);
+ if (!IS_ERR(clk)) {
+ cycle_frequency = clk_get_rate(clk);
+ }
+ }
+ }
+
+ clocks_calc_mult_shift(&rdcycle_cs.mult, &rdcycle_cs.shift,
+ cycle_frequency, NSEC_PER_SEC, 10);
+
+ return init_clock(&rdcycle_cs);
+}
+postcore_initcall(rdcycle_cs_init);
diff --git a/drivers/of/Kconfig b/drivers/of/Kconfig
index a1fac0e613..24cf4465a8 100644
--- a/drivers/of/Kconfig
+++ b/drivers/of/Kconfig
@@ -4,7 +4,7 @@ config OFTREE
config OFTREE_MEM_GENERIC
depends on OFTREE
- depends on PPC || ARM || EFI_BOOTUP || OPENRISC || SANDBOX
+ depends on PPC || ARM || EFI_BOOTUP || OPENRISC || SANDBOX || RISCV
def_bool y
config DTC
--
2.17.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH 02/10] RISC-V: add Erizo SoC support
2018-04-15 11:28 [PATCH 00/10] Add initial RISC-V architecture support Antony Pavlov
2018-04-15 11:28 ` [PATCH 01/10] " Antony Pavlov
@ 2018-04-15 11:28 ` Antony Pavlov
2018-04-17 6:30 ` Sascha Hauer
2018-04-15 11:28 ` [PATCH 03/10] RISC-V: add low-level debug macros for ns16550 Antony Pavlov
` (7 subsequent siblings)
9 siblings, 1 reply; 15+ messages in thread
From: Antony Pavlov @ 2018-04-15 11:28 UTC (permalink / raw)
To: barebox
Erizo is an opensource hardware SoC for FPGA.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
---
arch/riscv/Kconfig | 11 ++++++
arch/riscv/Makefile | 3 ++
arch/riscv/boards/erizo-generic/.gitignore | 1 +
arch/riscv/boards/erizo-generic/Makefile | 1 +
arch/riscv/boards/erizo-generic/board.c | 28 +++++++++++++
arch/riscv/dts/erizo.dtsi | 46 ++++++++++++++++++++++
arch/riscv/dts/erizo_generic.dts | 32 +++++++++++++++
arch/riscv/mach-erizo/Kconfig | 11 ++++++
arch/riscv/mach-erizo/Makefile | 3 ++
9 files changed, 136 insertions(+)
diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index d65e87acd8..fe79cb49b5 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -18,6 +18,15 @@ config GENERIC_LINKER_SCRIPT
menu "Machine selection"
+choice
+ prompt "System type"
+ default MACH_ERIZO
+
+config MACH_ERIZO
+ bool "erizo family"
+
+endchoice
+
choice
prompt "Base ISA"
default ARCH_RV32I
@@ -51,6 +60,8 @@ config BUILTIN_DTB_NAME
string "DTB to build into the barebox image"
depends on BUILTIN_DTB
+source arch/riscv/mach-erizo/Kconfig
+
endmenu
source common/Kconfig
diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile
index e9c407354c..9a3921065c 100644
--- a/arch/riscv/Makefile
+++ b/arch/riscv/Makefile
@@ -11,6 +11,9 @@ cflags-y += -Wall -Wmissing-prototypes -Wstrict-prototypes \
LDFLAGS += $(ldflags-y)
LDFLAGS_barebox += -nostdlib
+machine-$(CONFIG_MACH_ERIZO) := erizo
+board-$(CONFIG_BOARD_ERIZO_GENERIC) := erizo-generic
+
TEXT_BASE = $(CONFIG_TEXT_BASE)
CPPFLAGS += -DTEXT_BASE=$(CONFIG_TEXT_BASE)
diff --git a/arch/riscv/boards/erizo-generic/.gitignore b/arch/riscv/boards/erizo-generic/.gitignore
new file mode 100644
index 0000000000..d1165788c9
--- /dev/null
+++ b/arch/riscv/boards/erizo-generic/.gitignore
@@ -0,0 +1 @@
+barebox.lds
diff --git a/arch/riscv/boards/erizo-generic/Makefile b/arch/riscv/boards/erizo-generic/Makefile
new file mode 100644
index 0000000000..dcfc2937d3
--- /dev/null
+++ b/arch/riscv/boards/erizo-generic/Makefile
@@ -0,0 +1 @@
+obj-y += board.o
diff --git a/arch/riscv/boards/erizo-generic/board.c b/arch/riscv/boards/erizo-generic/board.c
new file mode 100644
index 0000000000..46c9ca34f0
--- /dev/null
+++ b/arch/riscv/boards/erizo-generic/board.c
@@ -0,0 +1,28 @@
+/*
+ * Copyright (C) 2017 Antony Pavlov <antonynpavlov@gmail.com>
+ *
+ * This file is part of barebox.
+ * See file CREDITS for list of people who contributed to this project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <common.h>
+#include <driver.h>
+#include <init.h>
+
+static int hostname_init(void)
+{
+ barebox_set_hostname("erizo-generic");
+
+ return 0;
+}
+postcore_initcall(hostname_init);
diff --git a/arch/riscv/dts/erizo.dtsi b/arch/riscv/dts/erizo.dtsi
new file mode 100644
index 0000000000..1660ad1040
--- /dev/null
+++ b/arch/riscv/dts/erizo.dtsi
@@ -0,0 +1,46 @@
+/dts-v1/;
+
+#include "skeleton.dtsi"
+
+/ {
+ compatible = "miet-riscv-workgroup,erizo";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ clocks {
+ ref_clk: ref_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ };
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "cliffordwolf,picorv32";
+ clocks = <&ref_clk>;
+ reg = <0>;
+ };
+ };
+
+ uart0: uart@90000000 {
+ compatible = "ns16550a";
+ reg = <0x90000000 0x20>;
+ reg-shift = <2>;
+ clocks = <&ref_clk>;
+ };
+
+ gpio0: gpio@91000000 {
+ compatible = "wd,mbl-gpio";
+ reg-names = "dat", "dirout";
+ reg = <0x91000000 0x4>,
+ <0x91000004 0x4>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+};
diff --git a/arch/riscv/dts/erizo_generic.dts b/arch/riscv/dts/erizo_generic.dts
new file mode 100644
index 0000000000..a35983ab30
--- /dev/null
+++ b/arch/riscv/dts/erizo_generic.dts
@@ -0,0 +1,32 @@
+#include "erizo.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "generic Erizo SoC board";
+ compatible = "miet-riscv-workgroup,erizo-generic-board";
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x00800000>;
+ };
+
+ spi0 {
+ compatible = "spi-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-sck = <&gpio0 0 GPIO_ACTIVE_HIGH>;
+ gpio-miso = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+ gpio-mosi = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+ num-chipselects = <1>;
+
+ m25p128@0 {
+ compatible = "m25p128", "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+};
diff --git a/arch/riscv/mach-erizo/Kconfig b/arch/riscv/mach-erizo/Kconfig
new file mode 100644
index 0000000000..2400b4437b
--- /dev/null
+++ b/arch/riscv/mach-erizo/Kconfig
@@ -0,0 +1,11 @@
+if MACH_ERIZO
+
+choice
+ prompt "Board type"
+
+config BOARD_ERIZO_GENERIC
+ bool "erizo generic board"
+
+endchoice
+
+endif
diff --git a/arch/riscv/mach-erizo/Makefile b/arch/riscv/mach-erizo/Makefile
new file mode 100644
index 0000000000..d9c51e74c3
--- /dev/null
+++ b/arch/riscv/mach-erizo/Makefile
@@ -0,0 +1,3 @@
+# just to build a built-in.o. Otherwise compilation fails when no o-files is
+# created.
+obj- += dummy.o
--
2.17.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH 03/10] RISC-V: add low-level debug macros for ns16550
2018-04-15 11:28 [PATCH 00/10] Add initial RISC-V architecture support Antony Pavlov
2018-04-15 11:28 ` [PATCH 01/10] " Antony Pavlov
2018-04-15 11:28 ` [PATCH 02/10] RISC-V: add Erizo SoC support Antony Pavlov
@ 2018-04-15 11:28 ` Antony Pavlov
2018-04-15 11:28 ` [PATCH 04/10] RISC-V: add nmon nano-monitor Antony Pavlov
` (6 subsequent siblings)
9 siblings, 0 replies; 15+ messages in thread
From: Antony Pavlov @ 2018-04-15 11:28 UTC (permalink / raw)
To: barebox
This patch adds macros for ns16550 port initialization
and single char output. The macros can be used in
MIPS asm pbl code.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
---
arch/riscv/include/asm/debug_ll_ns16550.h | 186 ++++++++++++++++++++++
1 file changed, 186 insertions(+)
diff --git a/arch/riscv/include/asm/debug_ll_ns16550.h b/arch/riscv/include/asm/debug_ll_ns16550.h
new file mode 100644
index 0000000000..6929453b1e
--- /dev/null
+++ b/arch/riscv/include/asm/debug_ll_ns16550.h
@@ -0,0 +1,186 @@
+/*
+ * Copyright (C) 2016, 2017 Antony Pavlov <antonynpavlov@gmail.com>
+ *
+ * This file is part of barebox.
+ * See file CREDITS for list of people who contributed to this project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+/** @file
+ * This file contains declaration for early output support
+ */
+#ifndef __INCLUDE_RISCV_ASM_DEBUG_LL_NS16550_H__
+#define __INCLUDE_RISCV_ASM_DEBUG_LL_NS16550_H__
+
+#include <linux/kconfig.h>
+
+#ifdef CONFIG_DEBUG_LL
+
+#ifndef DEBUG_LL_UART_ADDR
+#error DEBUG_LL_UART_ADDR is undefined!
+#endif
+
+#ifndef DEBUG_LL_UART_SHIFT
+#error DEBUG_LL_UART_SHIFT is undefined!
+#endif
+
+#ifndef DEBUG_LL_UART_DIVISOR
+#error DEBUG_LL_UART_DIVISOR is undefined!
+#endif
+
+#endif /* CONFIG_DEBUG_LL */
+
+#define UART_THR (0x0 << DEBUG_LL_UART_SHIFT)
+#define UART_RBR (0x0 << DEBUG_LL_UART_SHIFT)
+#define UART_DLL (0x0 << DEBUG_LL_UART_SHIFT)
+#define UART_DLM (0x1 << DEBUG_LL_UART_SHIFT)
+#define UART_LCR (0x3 << DEBUG_LL_UART_SHIFT)
+#define UART_LSR (0x5 << DEBUG_LL_UART_SHIFT)
+
+#define UART_LCR_W 0x07 /* Set UART to 8,N,2 & DLAB = 0 */
+#define UART_LCR_DLAB 0x87 /* Set UART to 8,N,2 & DLAB = 1 */
+
+#define UART_LSR_DR 0x01 /* UART received data present */
+#define UART_LSR_THRE 0x20 /* Xmit holding register empty */
+
+#if defined(DEBUG_LL_UART_IOSIZE32)
+#define UART_REG_L lw
+#define UART_REG_S sw
+#elif defined(DEBUG_LL_UART_IOSIZE8)
+#define UART_REG_L lbu
+#define UART_REG_S sb
+#else
+#error "Please define DEBUG_LL_UART_IOSIZE{8,32}"
+#endif
+
+#ifndef __ASSEMBLY__
+/*
+ * C macros
+ */
+
+#include <asm/io.h>
+
+static inline void PUTC_LL(char ch)
+{
+#ifdef CONFIG_DEBUG_LL
+ while (!(__raw_readl((u8 *)DEBUG_LL_UART_ADDR + UART_LSR) & UART_LSR_THRE))
+ ;
+ __raw_writel(ch, (u8 *)DEBUG_LL_UART_ADDR + UART_THR);
+#endif /* CONFIG_DEBUG_LL */
+}
+
+static inline void debug_ll_ns16550_init(void)
+{
+#ifdef CONFIG_DEBUG_LL
+ __raw_writel(UART_LCR_DLAB, (u8 *)DEBUG_LL_UART_ADDR + UART_LCR);
+ __raw_writel(DEBUG_LL_UART_DIVISOR & 0xff, (u8 *)DEBUG_LL_UART_ADDR + UART_DLL);
+ __raw_writel((DEBUG_LL_UART_DIVISOR >> 8) & 0xff, (u8 *)DEBUG_LL_UART_ADDR + UART_DLM);
+ __raw_writel(UART_LCR_W, (u8 *)DEBUG_LL_UART_ADDR + UART_LCR);
+#endif /* CONFIG_DEBUG_LL */
+}
+#else /* __ASSEMBLY__ */
+/*
+ * Macros for use in assembly language code
+ */
+
+.macro debug_ll_ns16550_init
+#ifdef CONFIG_DEBUG_LL
+ li t0, DEBUG_LL_UART_ADDR
+
+ li t1, UART_LCR_DLAB /* DLAB on */
+ UART_REG_S t1, UART_LCR(t0) /* Write it out */
+
+ li t1, DEBUG_LL_UART_DIVISOR
+ UART_REG_S t1, UART_DLL(t0) /* write low order byte */
+ srl t1, t1, 8
+ UART_REG_S t1, UART_DLM(t0) /* write high order byte */
+
+ li t1, UART_LCR_W /* DLAB off */
+ UART_REG_S t1, UART_LCR(t0) /* Write it out */
+#endif /* CONFIG_DEBUG_LL */
+.endm
+
+/*
+ * output a character in a0
+ */
+.macro debug_ll_outc_a0
+#ifdef CONFIG_DEBUG_LL
+
+ li t0, DEBUG_LL_UART_ADDR
+
+201:
+ UART_REG_L t1, UART_LSR(t0) /* get line status */
+ andi t1, t1, UART_LSR_THRE /* check for transmitter empty */
+ beqz t1, 201b /* try again */
+
+ UART_REG_S a0, UART_THR(t0) /* write the character */
+
+#endif /* CONFIG_DEBUG_LL */
+.endm
+
+/*
+ * output a character
+ */
+.macro debug_ll_outc chr
+#ifdef CONFIG_DEBUG_LL
+ li a0, \chr
+ debug_ll_outc_a0
+#endif /* CONFIG_DEBUG_LL */
+.endm
+
+/*
+ * output CR + NL
+ */
+.macro debug_ll_ns16550_outnl
+#ifdef CONFIG_DEBUG_LL
+ debug_ll_outc '\r'
+ debug_ll_outc '\n'
+#endif /* CONFIG_DEBUG_LL */
+.endm
+
+/*
+ * check character in input buffer
+ * return value:
+ * v0 = 0 no character in input buffer
+ * v0 != 0 character in input buffer
+ */
+.macro debug_ll_tstc
+#ifdef CONFIG_DEBUG_LL
+ li t0, DEBUG_LL_UART_ADDR
+
+ /* get line status and check for data present */
+ UART_REG_L s0, UART_LSR(t0)
+ andi s0, s0, UART_LSR_DR
+
+#endif /* CONFIG_DEBUG_LL */
+.endm
+
+/*
+ * get character to v0
+ */
+.macro debug_ll_getc
+#ifdef CONFIG_DEBUG_LL
+
+204:
+ debug_ll_tstc
+
+ /* try again */
+ beqz s0, 204b
+
+ /* read a character */
+ UART_REG_L s0, UART_RBR(t0)
+
+#endif /* CONFIG_DEBUG_LL */
+.endm
+#endif /* __ASSEMBLY__ */
+
+#endif /* __INCLUDE_RISCV_ASM_DEBUG_LL_NS16550_H__ */
--
2.17.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH 04/10] RISC-V: add nmon nano-monitor
2018-04-15 11:28 [PATCH 00/10] Add initial RISC-V architecture support Antony Pavlov
` (2 preceding siblings ...)
2018-04-15 11:28 ` [PATCH 03/10] RISC-V: add low-level debug macros for ns16550 Antony Pavlov
@ 2018-04-15 11:28 ` Antony Pavlov
2018-04-15 11:28 ` [PATCH 05/10] RISC-V: erizo: add DEBUG_LL support Antony Pavlov
` (5 subsequent siblings)
9 siblings, 0 replies; 15+ messages in thread
From: Antony Pavlov @ 2018-04-15 11:28 UTC (permalink / raw)
To: barebox
nmon is a tiny (<1024 bytes) monitor program
for the RV32I processors.
It can operate with NO working RAM at all!
It uses only the processor registers and NS16550-compatible
UART port for operation, so it can be used for a memory
controller setup code debugging.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
---
arch/riscv/Kconfig | 24 +++
arch/riscv/boot/start.S | 13 ++
arch/riscv/include/asm/riscv_nmon.h | 234 ++++++++++++++++++++++++++++
3 files changed, 271 insertions(+)
diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index fe79cb49b5..9e7faf11d0 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -64,6 +64,30 @@ source arch/riscv/mach-erizo/Kconfig
endmenu
+menu "RISC-V specific settings"
+
+config HAS_NMON
+ bool
+
+config NMON
+ bool "nmon"
+ depends on HAS_NMON
+ depends on DEBUG_LL
+ help
+ Say yes here to add the nmon to pbl.
+ nmon -- nano-monitor program for the RISC-V processors.
+ It can operate with NO working RAM, using only
+ the processor registers.
+
+config NMON_HELP
+ bool "nmon help message"
+ depends on NMON
+ help
+ Say yes here to get the nmon commands message on
+ every nmon start.
+
+endmenu
+
source common/Kconfig
source commands/Kconfig
source net/Kconfig
diff --git a/arch/riscv/boot/start.S b/arch/riscv/boot/start.S
index be3aed1507..4ae2f77f9d 100644
--- a/arch/riscv/boot/start.S
+++ b/arch/riscv/boot/start.S
@@ -21,12 +21,20 @@
#include <asm-generic/memory_layout.h>
+#include "mach/debug_ll.h"
+
+#include "asm/riscv_nmon.h"
+
.text
.section ".text_entry"
.align 2
.globl _start
_start:
+ debug_ll_ns16550_init
+
+ riscv_nmon
+
li sp, STACK_BASE + STACK_SIZE
/* copy barebox to link location */
@@ -55,9 +63,14 @@ copy_loop:
addi a1, a1, LONGSIZE * 4
bgeu a2, a0, copy_loop
+ nmon_outs copy_loop_done_message
+
/* Alas! At the moment I can't load main_entry __link__ address
into a0 with la. Use CONFIG_TEXT_BASE instead. This solution
leads to extra cycles for repeat sp initialization. */
li a0, CONFIG_TEXT_BASE
jalr a0
+
+copy_loop_done_message:
+ .asciz "\r\ncopy loop done\r\nrestarting...\r\n"
diff --git a/arch/riscv/include/asm/riscv_nmon.h b/arch/riscv/include/asm/riscv_nmon.h
new file mode 100644
index 0000000000..717f613349
--- /dev/null
+++ b/arch/riscv/include/asm/riscv_nmon.h
@@ -0,0 +1,234 @@
+/*
+ * nano-monitor for RISC-V CPU
+ *
+ * Copyright (C) 2016, 2017 Antony Pavlov <antonynpavlov@gmail.com>
+ *
+ * This file is part of barebox.
+ * See file CREDITS for list of people who contributed to this project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ASM_RISCV_NMON_H
+#define __ASM_RISCV_NMON_H
+
+#define CODE_ESC 0x1b
+
+.macro nmon_outs msg
+
+ la a1, \msg
+
+ jal _nmon_outs
+
+.endm
+
+/*
+ * output a 32-bit value in hex
+ */
+.macro debug_ll_outhexw
+#ifdef CONFIG_DEBUG_LL
+ move t6, a0
+ li t5, 32
+
+202:
+ addi t5, t5, -4
+ srl a0, t6, t5
+
+ /* output one hex digit */
+ andi a0, a0, 15
+ li t4, 10
+ blt a0, t4, 203f
+
+ addi a0, a0, ('a' - '9' - 1)
+
+203:
+ addi a0, a0, '0'
+
+ debug_ll_outc_a0
+
+ li t4, 1
+ bge t5, t4, 202b
+
+#endif /* CONFIG_DEBUG_LL */
+.endm
+
+.macro riscv_nmon
+
+nmon_main_help:
+#ifdef CONFIG_NMON_HELP
+ nmon_outs msg_nmon_help
+#endif /* CONFIG_NMON_HELP */
+
+nmon_main:
+ nmon_outs msg_prompt
+
+ debug_ll_getc
+
+ li a0, 'q'
+ bne s0, a0, 3f
+
+ jal _nmon_outc_a0
+
+ j nmon_exit
+
+3:
+ li a0, 'd'
+ beq s0, a0, nmon_cmd_d
+
+ li a0, 'w'
+ beq s0, a0, nmon_cmd_w
+
+ li a0, 'g'
+ beq s0, a0, nmon_cmd_g
+
+ j nmon_main_help
+
+nmon_cmd_d:
+ jal _nmon_outc_a0
+
+ li a0, ' '
+ jal _nmon_outc_a0
+
+ jal _nmon_gethexw
+
+ nmon_outs msg_nl
+
+ lw a0, (s0)
+ debug_ll_outhexw
+
+ j nmon_main
+
+nmon_cmd_w:
+ jal _nmon_outc_a0
+
+ li a0, ' '
+ jal _nmon_outc_a0
+
+ jal _nmon_gethexw
+ move s2, s0
+
+ li a0, ' '
+ jal _nmon_outc_a0
+ jal _nmon_gethexw
+
+ sw s0, 0(s2)
+ j nmon_main
+
+nmon_cmd_g:
+ jal _nmon_outc_a0
+
+ li a0, ' '
+ jal _nmon_outc_a0
+
+ jal _nmon_gethexw
+ move s2, s0
+
+ nmon_outs msg_nl
+
+ jalr s2
+ j nmon_main
+
+_nmon_outc_a0:
+ debug_ll_outc_a0
+ jr ra
+
+_nmon_outs:
+
+ lb a0, 0(a1)
+ addi a1, a1, 1
+ beqz a0, _nmon_jr_ra_exit
+
+ debug_ll_outc_a0
+
+ j _nmon_outs
+
+_nmon_gethexw:
+
+ li t3, 8
+ li t2, 0
+
+_get_hex_digit:
+ debug_ll_getc
+
+ li s1, CODE_ESC
+ beq s0, s1, nmon_main
+
+ li s1, '0'
+ bge s0, s1, 0f
+ j _get_hex_digit
+
+0:
+ li s1, '9'
+ ble s0, s1, 9f
+
+ li s1, 'f'
+ ble s0, s1, 1f
+ j _get_hex_digit
+
+1:
+ li s1, 'a'
+ bge s0, s1, 8f
+
+ j _get_hex_digit
+
+8: /* s0 \in {'a', 'b' ... 'f'} */
+ sub a3, s0, s1
+ addi a3, a3, 0xa
+ j 0f
+
+9: /* s0 \in {'0', '1' ... '9'} */
+ li a3, '0'
+ sub a3, s0, a3
+
+0: move a0, s0
+ debug_ll_outc_a0
+
+ sll t2, t2, 4
+ or t2, t2, a3
+ li t0, 1
+ sub t3, t3, t0
+
+ beqz t3, 0f
+
+ j _get_hex_digit
+
+0:
+ move s0, t2
+
+_nmon_jr_ra_exit:
+ jr ra
+
+msg_prompt:
+ .asciz "\r\nnmon> "
+
+msg_nl:
+ .asciz "\r\n"
+
+msg_bsp:
+ .asciz "\b \b"
+
+#ifdef CONFIG_NMON_HELP
+msg_nmon_help:
+ .ascii "\r\n\r\nnmon commands:\r\n"
+ .ascii " q - quit\r\n"
+ .ascii " d <addr> - read 32-bit word from <addr>\r\n"
+ .ascii " w <addr> <val> - write 32-bit word to <addr>\r\n"
+ .ascii " g <addr> - jump to <addr>\r\n"
+ .asciz " use <ESC> key to interrupt current command\r\n"
+#endif /* CONFIG_NMON_HELP */
+
+ .align 2
+nmon_exit:
+ nmon_outs msg_nl
+
+.endm
+
+#endif /* __ASM_RISCV_NMON_H */
--
2.17.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH 05/10] RISC-V: erizo: add DEBUG_LL support
2018-04-15 11:28 [PATCH 00/10] Add initial RISC-V architecture support Antony Pavlov
` (3 preceding siblings ...)
2018-04-15 11:28 ` [PATCH 04/10] RISC-V: add nmon nano-monitor Antony Pavlov
@ 2018-04-15 11:28 ` Antony Pavlov
2018-04-15 11:28 ` [PATCH 06/10] RISC-V: erizo: enable NMON Antony Pavlov
` (4 subsequent siblings)
9 siblings, 0 replies; 15+ messages in thread
From: Antony Pavlov @ 2018-04-15 11:28 UTC (permalink / raw)
To: barebox
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
---
arch/riscv/Kconfig | 1 +
arch/riscv/mach-erizo/include/mach/debug_ll.h | 37 +++++++++++++++++++
2 files changed, 38 insertions(+)
diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index 9e7faf11d0..ff3e6b96ab 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -24,6 +24,7 @@ choice
config MACH_ERIZO
bool "erizo family"
+ select HAS_DEBUG_LL
endchoice
diff --git a/arch/riscv/mach-erizo/include/mach/debug_ll.h b/arch/riscv/mach-erizo/include/mach/debug_ll.h
new file mode 100644
index 0000000000..913b323d99
--- /dev/null
+++ b/arch/riscv/mach-erizo/include/mach/debug_ll.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) 2017 Antony Pavlov <antonynpavlov@gmail.com>
+ *
+ * This file is part of barebox.
+ * See file CREDITS for list of people who contributed to this project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __MACH_ERIZO_DEBUG_LL__
+#define __MACH_ERIZO_DEBUG_LL__
+
+/** @file
+ * This File contains declaration for early output support
+ */
+
+#include <linux/kconfig.h>
+
+#define DEBUG_LL_UART_ADDR 0x90000000
+#define DEBUG_LL_UART_SHIFT 2
+#define DEBUG_LL_UART_IOSIZE32
+
+#define DEBUG_LL_UART_CLK (24000000 / 16)
+#define DEBUG_LL_UART_BPS CONFIG_BAUDRATE
+#define DEBUG_LL_UART_DIVISOR (DEBUG_LL_UART_CLK / DEBUG_LL_UART_BPS)
+
+#include <asm/debug_ll_ns16550.h>
+
+#endif /* __MACH_ERIZO_DEBUG_LL__ */
--
2.17.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH 06/10] RISC-V: erizo: enable NMON
2018-04-15 11:28 [PATCH 00/10] Add initial RISC-V architecture support Antony Pavlov
` (4 preceding siblings ...)
2018-04-15 11:28 ` [PATCH 05/10] RISC-V: erizo: add DEBUG_LL support Antony Pavlov
@ 2018-04-15 11:28 ` Antony Pavlov
2018-04-15 11:28 ` [PATCH 07/10] RISC-V: erizo: add nmon image creation Antony Pavlov
` (3 subsequent siblings)
9 siblings, 0 replies; 15+ messages in thread
From: Antony Pavlov @ 2018-04-15 11:28 UTC (permalink / raw)
To: barebox
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
---
arch/riscv/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index ff3e6b96ab..915294c9cd 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -25,6 +25,7 @@ choice
config MACH_ERIZO
bool "erizo family"
select HAS_DEBUG_LL
+ select HAS_NMON
endchoice
--
2.17.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH 07/10] RISC-V: erizo: add nmon image creation
2018-04-15 11:28 [PATCH 00/10] Add initial RISC-V architecture support Antony Pavlov
` (5 preceding siblings ...)
2018-04-15 11:28 ` [PATCH 06/10] RISC-V: erizo: enable NMON Antony Pavlov
@ 2018-04-15 11:28 ` Antony Pavlov
2018-04-17 6:34 ` Sascha Hauer
2018-04-15 11:28 ` [PATCH 08/10] RISC-V: add erizo_generic_defconfig Antony Pavlov
` (2 subsequent siblings)
9 siblings, 1 reply; 15+ messages in thread
From: Antony Pavlov @ 2018-04-15 11:28 UTC (permalink / raw)
To: barebox
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
---
arch/riscv/Makefile | 11 +++++++++++
scripts/erizo-nmon-image | 3 +++
2 files changed, 14 insertions(+)
diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile
index 9a3921065c..c837d4e2e4 100644
--- a/arch/riscv/Makefile
+++ b/arch/riscv/Makefile
@@ -73,3 +73,14 @@ CFLAGS += $(cflags-y)
lds-y := arch/riscv/lib/barebox.lds
CLEAN_FILES += arch/riscv/lib/barebox.lds
+
+ifeq ($(CONFIG_MACH_ERIZO),y)
+KBUILD_IMAGE := barebox.erizo.nmon
+endif
+
+quiet_cmd_erizo_nmon_image = MKIMAGE $@
+ cmd_erizo_nmon_image = $(srctree)/scripts/erizo-nmon-image $< $@ || \
+ echo "WARNING: Couldn't create erizo nmon image due to previous errors."
+
+barebox.erizo.nmon: $(KBUILD_BINARY) FORCE
+ $(call if_changed,erizo_nmon_image)
diff --git a/scripts/erizo-nmon-image b/scripts/erizo-nmon-image
new file mode 100755
index 0000000000..4f0185b6de
--- /dev/null
+++ b/scripts/erizo-nmon-image
@@ -0,0 +1,3 @@
+#!/bin/sh
+
+hexdump -v -e '/4 "%08x\n"' $1 | perl -e '$a = 0x80000000; while (<>) { chop; printf("expect \"nmon> \"\n"); printf("send \"w%08x$_\"\n", $a); $a = $a + 4; }' > $2
--
2.17.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH 08/10] RISC-V: add erizo_generic_defconfig
2018-04-15 11:28 [PATCH 00/10] Add initial RISC-V architecture support Antony Pavlov
` (6 preceding siblings ...)
2018-04-15 11:28 ` [PATCH 07/10] RISC-V: erizo: add nmon image creation Antony Pavlov
@ 2018-04-15 11:28 ` Antony Pavlov
2018-04-15 11:28 ` [PATCH 09/10] scripts: add nmon-loader Antony Pavlov
2018-04-15 11:28 ` [PATCH 10/10] Documentation: add RISC-V docs Antony Pavlov
9 siblings, 0 replies; 15+ messages in thread
From: Antony Pavlov @ 2018-04-15 11:28 UTC (permalink / raw)
To: barebox
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
---
arch/riscv/configs/erizo_generic_defconfig | 53 ++++++++++++++++++++++
1 file changed, 53 insertions(+)
diff --git a/arch/riscv/configs/erizo_generic_defconfig b/arch/riscv/configs/erizo_generic_defconfig
new file mode 100644
index 0000000000..e62b6ec719
--- /dev/null
+++ b/arch/riscv/configs/erizo_generic_defconfig
@@ -0,0 +1,53 @@
+CONFIG_BUILTIN_DTB=y
+CONFIG_BUILTIN_DTB_NAME="erizo_generic"
+# CONFIG_GLOBALVAR is not set
+CONFIG_TEXT_BASE=0x80000000
+CONFIG_MEMORY_LAYOUT_FIXED=y
+CONFIG_STACK_BASE=0x800e0000
+CONFIG_STACK_SIZE=0x20000
+CONFIG_MALLOC_BASE=0x80100000
+CONFIG_MALLOC_SIZE=0x100000
+CONFIG_MALLOC_TLSF=y
+CONFIG_PANIC_HANG=y
+CONFIG_HUSH_FANCY_PROMPT=y
+CONFIG_CMDLINE_EDITING=y
+CONFIG_AUTO_COMPLETE=y
+# CONFIG_ERRNO_MESSAGES is not set
+# CONFIG_TIMESTAMP is not set
+# CONFIG_BOOTM is not set
+# CONFIG_ENV_HANDLING is not set
+CONFIG_POLLER=y
+CONFIG_DEBUG_LL=y
+CONFIG_LONGHELP=y
+CONFIG_CMD_IOMEM=y
+CONFIG_CMD_IMD=y
+CONFIG_CMD_MEMINFO=y
+CONFIG_CMD_GO=y
+CONFIG_CMD_LOADY=y
+CONFIG_CMD_CMP=y
+CONFIG_CMD_MD5SUM=y
+CONFIG_CMD_SHA1SUM=y
+CONFIG_CMD_MSLEEP=y
+CONFIG_CMD_SLEEP=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_MM=y
+CONFIG_CMD_FLASH=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_OF_DUMP=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_DHRYSTONE=y
+CONFIG_OFDEVICE=y
+CONFIG_DRIVER_SERIAL_NS16550=y
+CONFIG_DRIVER_SPI_GPIO=y
+CONFIG_I2C=y
+CONFIG_I2C_GPIO=y
+CONFIG_MTD=y
+# CONFIG_MTD_OOB_DEVICE is not set
+CONFIG_MTD_M25P80=y
+CONFIG_CLOCKSOURCE_DUMMY_RATE=60000
+CONFIG_EEPROM_AT24=y
+CONFIG_GPIO_GENERIC_PLATFORM=y
+# CONFIG_PINCTRL is not set
+CONFIG_DIGEST_CRC32_GENERIC=y
--
2.17.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH 09/10] scripts: add nmon-loader
2018-04-15 11:28 [PATCH 00/10] Add initial RISC-V architecture support Antony Pavlov
` (7 preceding siblings ...)
2018-04-15 11:28 ` [PATCH 08/10] RISC-V: add erizo_generic_defconfig Antony Pavlov
@ 2018-04-15 11:28 ` Antony Pavlov
2018-04-15 11:28 ` [PATCH 10/10] Documentation: add RISC-V docs Antony Pavlov
9 siblings, 0 replies; 15+ messages in thread
From: Antony Pavlov @ 2018-04-15 11:28 UTC (permalink / raw)
To: barebox
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
---
scripts/nmon-loader | 31 +++++++++++++++++++++++++++++++
1 file changed, 31 insertions(+)
diff --git a/scripts/nmon-loader b/scripts/nmon-loader
new file mode 100755
index 0000000000..d80a53097a
--- /dev/null
+++ b/scripts/nmon-loader
@@ -0,0 +1,31 @@
+#!/usr/bin/expect -f
+
+# device
+set image [lindex $argv 0];
+set modem [lindex $argv 1];
+set speed [lindex $argv 2];
+
+if {$argc != 3} {
+ puts "Usage:"
+ puts " nmon-loader.expect <file> <device> <speed>"
+ exit 2
+}
+
+# keep it open
+exec sh -c "sleep 3 < $modem" &
+
+# serial port parameters
+exec stty -F $modem $speed raw -clocal -echo -istrip -hup
+
+# connect
+send_user "connecting to $modem, exit with ~.\n"
+spawn -open [open $modem w+]
+send_user "connected\n"
+send "\r"
+
+source $image
+
+interact {
+ ~- exit
+ ~~ {send "\034"}
+}
--
2.17.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH 10/10] Documentation: add RISC-V docs
2018-04-15 11:28 [PATCH 00/10] Add initial RISC-V architecture support Antony Pavlov
` (8 preceding siblings ...)
2018-04-15 11:28 ` [PATCH 09/10] scripts: add nmon-loader Antony Pavlov
@ 2018-04-15 11:28 ` Antony Pavlov
9 siblings, 0 replies; 15+ messages in thread
From: Antony Pavlov @ 2018-04-15 11:28 UTC (permalink / raw)
To: barebox
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
---
Documentation/boards/riscv.rst | 106 +++++++++++++++++++++++++++++++++
1 file changed, 106 insertions(+)
diff --git a/Documentation/boards/riscv.rst b/Documentation/boards/riscv.rst
new file mode 100644
index 0000000000..0cde02305e
--- /dev/null
+++ b/Documentation/boards/riscv.rst
@@ -0,0 +1,106 @@
+RISC-V
+======
+
+Running RISC-V barebox on qemu
+------------------------------
+
+Obtain RISC-V GCC/Newlib Toolchain,
+see https://github.com/riscv/riscv-tools/blob/master/README.md
+for details. The ``build.sh`` script from ``riscv-tools`` should
+create toolchain.
+
+Next compile qemu emulator::
+
+ $ git clone -b 20180409.erizo https://github.com/miet-riscv-workgroup/riscv-qemu
+ $ cd riscv-qemu
+ $ cap="no" ./configure \
+ --extra-cflags="-Wno-maybe-uninitialized" \
+ --audio-drv-list="" \
+ --disable-attr \
+ --disable-blobs \
+ --disable-bluez \
+ --disable-brlapi \
+ --disable-curl \
+ --disable-curses \
+ --disable-docs \
+ --disable-kvm \
+ --disable-spice \
+ --disable-sdl \
+ --disable-vde \
+ --disable-vnc-sasl \
+ --disable-werror \
+ --enable-trace-backend=simple \
+ --disable-stack-protector \
+ --target-list=riscv32-softmmu,riscv64-softmmu
+ $ make
+
+
+Next compile barebox::
+
+ $ make erizo_generic_defconfig ARCH=riscv
+ ...
+ $ make ARCH=riscv CROSS_COMPILE=<path to your riscv toolchain>/riscv32-unknown-elf-
+
+Run barebox::
+
+ $ <path to riscv-qemu source>/riscv32-softmmu/qemu-system-riscv32 \
+ -nographic -M erizo -bios <path to barebox sources >/barebox.bin \
+ -serial stdio -monitor none -trace file=/dev/null
+
+ nmon> q
+
+ copy loop done
+ restarting...
+
+ nmon> q
+ Switch to console [cs0]
+
+
+ barebox 2018.04.0-00140-gc717a0b017 #0 Sun Apr 15 11:30:42 MSK 2018
+
+
+ Board: generic Erizo SoC board
+ m25p80 m25p128@00: unrecognized JEDEC id bytes: 00, 0, 0
+ m25p80 m25p128@00: probe failed: error 2
+ malloc space: 0x80100000 -> 0x801fffff (size 1 MiB)
+ running /env/bin/init...
+ /env/bin/init not found
+ barebox:/
+
+
+Running RISC-V barebox on DE0-Nano FPGA board
+---------------------------------------------
+
+See https://github.com/open-design/riscv-soc-cores/ for instructions
+on DE0-Nano bitstream generation and loading.
+
+Connect to board's UART with your favorite serial communication software
+(e.g. minicom) and check 'nmon> ' prompt (nmon runs from onchip ROM).
+
+Next close your communication software and use ./scripts/nmon-loader
+to load barebox image into board's DRAM, e.g.
+
+ # ./scripts/nmon-loader barebox.erizo.nmon /dev/ttyUSB0 115200
+
+Wait several munutes for 'nmon> ' prompt.
+
+Next, start barebox from DRAM:
+
+ nmon> g 80000000
+
+You should see one more 'nmon> ' prompt (this nmon runs from DRAM).
+Exit nmon with 'q' command:
+
+ nmon> q
+ Switch to console [cs0]
+
+
+ barebox 2018.04.0-00140-gc717a0b017 #0 Sun Apr 15 11:30:42 MSK 2018
+
+
+ Board: generic Erizo SoC board
+ m25p80 m25p128@00: s25sl064p (8192 Kbytes)
+ malloc space: 0x80100000 -> 0x801fffff (size 1 MiB)
+ running /env/bin/init...
+ /env/bin/init not found
+ barebox:/
--
2.17.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 01/10] Add initial RISC-V architecture support
2018-04-15 11:28 ` [PATCH 01/10] " Antony Pavlov
@ 2018-04-17 6:22 ` Sascha Hauer
2018-06-25 6:46 ` Antony Pavlov
0 siblings, 1 reply; 15+ messages in thread
From: Sascha Hauer @ 2018-04-17 6:22 UTC (permalink / raw)
To: Antony Pavlov; +Cc: barebox
Hi Antony,
On Sun, Apr 15, 2018 at 02:28:49PM +0300, Antony Pavlov wrote:
> Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
> ---
> diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
> new file mode 100644
> index 0000000000..d65e87acd8
> --- /dev/null
> +++ b/arch/riscv/Kconfig
> @@ -0,0 +1,62 @@
> +config RISCV
> + def_bool y
> + select GENERIC_FIND_NEXT_BIT
> + select HAVE_CONFIGURABLE_MEMORY_LAYOUT
> + select HAVE_CONFIGURABLE_TEXT_BASE
> + select GPIOLIB
> + select OFTREE
> + select COMMON_CLK
> + select COMMON_CLK_OF_PROVIDER
> + select CLKDEV_LOOKUP
> +
> +config ARCH_TEXT_BASE
> + hex
> + default 0x0
> +
> +config GENERIC_LINKER_SCRIPT
> + def_bool y
Do we need this? The linker script should be universal enough to be used
by all boards.
> diff --git a/arch/riscv/dts/skeleton.dtsi b/arch/riscv/dts/skeleton.dtsi
> new file mode 100644
> index 0000000000..38ead821bb
> --- /dev/null
> +++ b/arch/riscv/dts/skeleton.dtsi
> @@ -0,0 +1,13 @@
> +/*
> + * Skeleton device tree; the bare minimum needed to boot; just include and
> + * add a compatible value. The bootloader will typically populate the memory
> + * node.
> + */
> +
> +/ {
> + #address-cells = <2>;
> + #size-cells = <1>;
> + chosen { };
> + aliases { };
> + memory { device_type = "memory"; reg = <0 0 0>; };
> +};
skeleton.dtsi should no longer be used. For example we should now have
memory@adr {}; instead of memory {};. Since "adr" is board/SoC specific
we can't put it in a generic file.
> diff --git a/arch/riscv/lib/ashldi3.c b/arch/riscv/lib/ashldi3.c
> new file mode 100644
> index 0000000000..cbdbcbb6a9
> --- /dev/null
> +++ b/arch/riscv/lib/ashldi3.c
> @@ -0,0 +1,28 @@
> +#include <module.h>
> +
> +#include "libgcc.h"
> +
> +long long __ashldi3(long long u, word_type b)
> +{
Can we have generic C variants for these files? The Kernel has these
symbols in lib/ and they can be selected by "select GENERIC_ASHLDI3"
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 02/10] RISC-V: add Erizo SoC support
2018-04-15 11:28 ` [PATCH 02/10] RISC-V: add Erizo SoC support Antony Pavlov
@ 2018-04-17 6:30 ` Sascha Hauer
0 siblings, 0 replies; 15+ messages in thread
From: Sascha Hauer @ 2018-04-17 6:30 UTC (permalink / raw)
To: Antony Pavlov; +Cc: barebox
On Sun, Apr 15, 2018 at 02:28:50PM +0300, Antony Pavlov wrote:
> Erizo is an opensource hardware SoC for FPGA.
>
> Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
> ---
> arch/riscv/Kconfig | 11 ++++++
> arch/riscv/Makefile | 3 ++
> arch/riscv/boards/erizo-generic/.gitignore | 1 +
> arch/riscv/boards/erizo-generic/Makefile | 1 +
> arch/riscv/boards/erizo-generic/board.c | 28 +++++++++++++
> arch/riscv/dts/erizo.dtsi | 46 ++++++++++++++++++++++
> arch/riscv/dts/erizo_generic.dts | 32 +++++++++++++++
> arch/riscv/mach-erizo/Kconfig | 11 ++++++
> arch/riscv/mach-erizo/Makefile | 3 ++
> 9 files changed, 136 insertions(+)
>
> diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
> index d65e87acd8..fe79cb49b5 100644
> --- a/arch/riscv/Kconfig
> +++ b/arch/riscv/Kconfig
> @@ -18,6 +18,15 @@ config GENERIC_LINKER_SCRIPT
>
> menu "Machine selection"
>
> +choice
> + prompt "System type"
> + default MACH_ERIZO
> +
> +config MACH_ERIZO
> + bool "erizo family"
> +
> +endchoice
> +
> choice
> prompt "Base ISA"
> default ARCH_RV32I
> @@ -51,6 +60,8 @@ config BUILTIN_DTB_NAME
> string "DTB to build into the barebox image"
> depends on BUILTIN_DTB
>
> +source arch/riscv/mach-erizo/Kconfig
> +
> endmenu
>
> source common/Kconfig
> diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile
> index e9c407354c..9a3921065c 100644
> --- a/arch/riscv/Makefile
> +++ b/arch/riscv/Makefile
> @@ -11,6 +11,9 @@ cflags-y += -Wall -Wmissing-prototypes -Wstrict-prototypes \
> LDFLAGS += $(ldflags-y)
> LDFLAGS_barebox += -nostdlib
>
> +machine-$(CONFIG_MACH_ERIZO) := erizo
> +board-$(CONFIG_BOARD_ERIZO_GENERIC) := erizo-generic
> +
> TEXT_BASE = $(CONFIG_TEXT_BASE)
> CPPFLAGS += -DTEXT_BASE=$(CONFIG_TEXT_BASE)
>
> diff --git a/arch/riscv/boards/erizo-generic/.gitignore b/arch/riscv/boards/erizo-generic/.gitignore
> new file mode 100644
> index 0000000000..d1165788c9
> --- /dev/null
> +++ b/arch/riscv/boards/erizo-generic/.gitignore
> @@ -0,0 +1 @@
> +barebox.lds
> diff --git a/arch/riscv/boards/erizo-generic/Makefile b/arch/riscv/boards/erizo-generic/Makefile
> new file mode 100644
> index 0000000000..dcfc2937d3
> --- /dev/null
> +++ b/arch/riscv/boards/erizo-generic/Makefile
> @@ -0,0 +1 @@
> +obj-y += board.o
> diff --git a/arch/riscv/boards/erizo-generic/board.c b/arch/riscv/boards/erizo-generic/board.c
> new file mode 100644
> index 0000000000..46c9ca34f0
> --- /dev/null
> +++ b/arch/riscv/boards/erizo-generic/board.c
> @@ -0,0 +1,28 @@
> +/*
> + * Copyright (C) 2017 Antony Pavlov <antonynpavlov@gmail.com>
> + *
> + * This file is part of barebox.
> + * See file CREDITS for list of people who contributed to this project.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2
> + * as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +#include <common.h>
> +#include <driver.h>
> +#include <init.h>
> +
> +static int hostname_init(void)
> +{
> + barebox_set_hostname("erizo-generic");
> +
> + return 0;
> +}
> +postcore_initcall(hostname_init);
> diff --git a/arch/riscv/dts/erizo.dtsi b/arch/riscv/dts/erizo.dtsi
> new file mode 100644
> index 0000000000..1660ad1040
> --- /dev/null
> +++ b/arch/riscv/dts/erizo.dtsi
> @@ -0,0 +1,46 @@
> +/dts-v1/;
> +
> +#include "skeleton.dtsi"
> +
> +/ {
> + compatible = "miet-riscv-workgroup,erizo";
> +
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + clocks {
> + ref_clk: ref_clk {
> + #clock-cells = <0>;
> + compatible = "fixed-clock";
> + clock-frequency = <24000000>;
> + };
> + };
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + cpu@0 {
> + device_type = "cpu";
> + compatible = "cliffordwolf,picorv32";
> + clocks = <&ref_clk>;
> + reg = <0>;
> + };
> + };
> +
> + uart0: uart@90000000 {
> + compatible = "ns16550a";
> + reg = <0x90000000 0x20>;
> + reg-shift = <2>;
> + clocks = <&ref_clk>;
> + };
> +
> + gpio0: gpio@91000000 {
> + compatible = "wd,mbl-gpio";
> + reg-names = "dat", "dirout";
> + reg = <0x91000000 0x4>,
> + <0x91000004 0x4>;
> + #gpio-cells = <2>;
> + gpio-controller;
> + };
> +};
> diff --git a/arch/riscv/dts/erizo_generic.dts b/arch/riscv/dts/erizo_generic.dts
> new file mode 100644
> index 0000000000..a35983ab30
> --- /dev/null
> +++ b/arch/riscv/dts/erizo_generic.dts
> @@ -0,0 +1,32 @@
> +#include "erizo.dtsi"
> +#include <dt-bindings/gpio/gpio.h>
> +
> +/ {
> + model = "generic Erizo SoC board";
> + compatible = "miet-riscv-workgroup,erizo-generic-board";
> +
> + memory {
> + device_type = "memory";
> + reg = <0x80000000 0x00800000>;
> + };
> +
> + spi0 {
> + compatible = "spi-gpio";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + gpio-sck = <&gpio0 0 GPIO_ACTIVE_HIGH>;
> + gpio-miso = <&gpio0 1 GPIO_ACTIVE_HIGH>;
> + gpio-mosi = <&gpio0 2 GPIO_ACTIVE_HIGH>;
> + cs-gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
> + num-chipselects = <1>;
> +
> + m25p128@0 {
> + compatible = "m25p128", "jedec,spi-nor";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + reg = <0>;
> + spi-max-frequency = <1000000>;
> + };
> + };
> +};
"generic" and GPIOs wired up for SPI do not go together very well. Are
there really more boards wired up like this?
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 07/10] RISC-V: erizo: add nmon image creation
2018-04-15 11:28 ` [PATCH 07/10] RISC-V: erizo: add nmon image creation Antony Pavlov
@ 2018-04-17 6:34 ` Sascha Hauer
0 siblings, 0 replies; 15+ messages in thread
From: Sascha Hauer @ 2018-04-17 6:34 UTC (permalink / raw)
To: Antony Pavlov; +Cc: barebox
On Sun, Apr 15, 2018 at 02:28:55PM +0300, Antony Pavlov wrote:
> Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
> ---
> arch/riscv/Makefile | 11 +++++++++++
> scripts/erizo-nmon-image | 3 +++
> 2 files changed, 14 insertions(+)
>
> diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile
> index 9a3921065c..c837d4e2e4 100644
> --- a/arch/riscv/Makefile
> +++ b/arch/riscv/Makefile
> @@ -73,3 +73,14 @@ CFLAGS += $(cflags-y)
> lds-y := arch/riscv/lib/barebox.lds
>
> CLEAN_FILES += arch/riscv/lib/barebox.lds
> +
> +ifeq ($(CONFIG_MACH_ERIZO),y)
> +KBUILD_IMAGE := barebox.erizo.nmon
> +endif
> +
> +quiet_cmd_erizo_nmon_image = MKIMAGE $@
> + cmd_erizo_nmon_image = $(srctree)/scripts/erizo-nmon-image $< $@ || \
> + echo "WARNING: Couldn't create erizo nmon image due to previous errors."
> +
> +barebox.erizo.nmon: $(KBUILD_BINARY) FORCE
> + $(call if_changed,erizo_nmon_image)
> diff --git a/scripts/erizo-nmon-image b/scripts/erizo-nmon-image
> new file mode 100755
> index 0000000000..4f0185b6de
> --- /dev/null
> +++ b/scripts/erizo-nmon-image
> @@ -0,0 +1,3 @@
> +#!/bin/sh
> +
> +hexdump -v -e '/4 "%08x\n"' $1 | perl -e '$a = 0x80000000; while (<>) { chop; printf("expect \"nmon> \"\n"); printf("send \"w%08x$_\"\n", $a); $a = $a + 4; }' > $2
> --
Maybe add some
if [ $# != 2 ]; then echo "usage: ..."; exit 1; fi
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 01/10] Add initial RISC-V architecture support
2018-04-17 6:22 ` Sascha Hauer
@ 2018-06-25 6:46 ` Antony Pavlov
0 siblings, 0 replies; 15+ messages in thread
From: Antony Pavlov @ 2018-06-25 6:46 UTC (permalink / raw)
To: Sascha Hauer; +Cc: barebox
On Tue, 17 Apr 2018 08:22:55 +0200
Sascha Hauer <s.hauer@pengutronix.de> wrote:
> Hi Antony,
>
> On Sun, Apr 15, 2018 at 02:28:49PM +0300, Antony Pavlov wrote:
> > Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
> > ---
> > diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
> > new file mode 100644
> > index 0000000000..d65e87acd8
> > --- /dev/null
> > +++ b/arch/riscv/Kconfig
> > @@ -0,0 +1,62 @@
> > +config RISCV
> > + def_bool y
> > + select GENERIC_FIND_NEXT_BIT
> > + select HAVE_CONFIGURABLE_MEMORY_LAYOUT
> > + select HAVE_CONFIGURABLE_TEXT_BASE
> > + select GPIOLIB
> > + select OFTREE
> > + select COMMON_CLK
> > + select COMMON_CLK_OF_PROVIDER
> > + select CLKDEV_LOOKUP
> > +
> > +config ARCH_TEXT_BASE
> > + hex
> > + default 0x0
> > +
> > +config GENERIC_LINKER_SCRIPT
> > + def_bool y
>
> Do we need this? The linker script should be universal enough to be used
> by all boards.
I have dropped it in v2 RISC-V patchseries.
> > diff --git a/arch/riscv/dts/skeleton.dtsi b/arch/riscv/dts/skeleton.dtsi
> > new file mode 100644
> > index 0000000000..38ead821bb
> > --- /dev/null
> > +++ b/arch/riscv/dts/skeleton.dtsi
> > @@ -0,0 +1,13 @@
> > +/*
> > + * Skeleton device tree; the bare minimum needed to boot; just include and
> > + * add a compatible value. The bootloader will typically populate the memory
> > + * node.
> > + */
> > +
> > +/ {
> > + #address-cells = <2>;
> > + #size-cells = <1>;
> > + chosen { };
> > + aliases { };
> > + memory { device_type = "memory"; reg = <0 0 0>; };
> > +};
>
> skeleton.dtsi should no longer be used. For example we should now have
> memory@adr {}; instead of memory {};. Since "adr" is board/SoC specific
> we can't put it in a generic file.
I have dropped skeleton.dtsi in the v2 RISC-V patchseries.
I have even submitted patches for MIPS, please review.
>
> > diff --git a/arch/riscv/lib/ashldi3.c b/arch/riscv/lib/ashldi3.c
> > new file mode 100644
> > index 0000000000..cbdbcbb6a9
> > --- /dev/null
> > +++ b/arch/riscv/lib/ashldi3.c
> > @@ -0,0 +1,28 @@
> > +#include <module.h>
> > +
> > +#include "libgcc.h"
> > +
> > +long long __ashldi3(long long u, word_type b)
> > +{
>
> Can we have generic C variants for these files? The Kernel has these
> symbols in lib/ and they can be selected by "select GENERIC_ASHLDI3"
I know about this problem. I have even made a patch for linux kernel for MIPS:
[PATCH v3 2/2] MIPS: use generic GCC library routines from lib/
https://www.mail-archive.com/linux-kernel@vger.kernel.org/msg1599191.html
During this MIPS patch discussion it has become evident that Kconfig GENERIC_
prefix has to be changed to GENERIC_LIB_.
This morning I found that the patch
[PATCH] lib: Rename compiler intrinsic selects to GENERIC_LIB_*
https://patchwork.kernel.org/patch/10335017/
has been merged by Linus almost two weeks ago.
So I can prepare corresponding generic GCC functions barebox patchseries
(it will be useful for MIPS). Next I shall submit RISC-V v2 patchseries.
RISC-V will use generic GCC functions from lib/ too.
--
Best regards,
Antony Pavlov
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 15+ messages in thread
end of thread, other threads:[~2018-06-25 6:45 UTC | newest]
Thread overview: 15+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-04-15 11:28 [PATCH 00/10] Add initial RISC-V architecture support Antony Pavlov
2018-04-15 11:28 ` [PATCH 01/10] " Antony Pavlov
2018-04-17 6:22 ` Sascha Hauer
2018-06-25 6:46 ` Antony Pavlov
2018-04-15 11:28 ` [PATCH 02/10] RISC-V: add Erizo SoC support Antony Pavlov
2018-04-17 6:30 ` Sascha Hauer
2018-04-15 11:28 ` [PATCH 03/10] RISC-V: add low-level debug macros for ns16550 Antony Pavlov
2018-04-15 11:28 ` [PATCH 04/10] RISC-V: add nmon nano-monitor Antony Pavlov
2018-04-15 11:28 ` [PATCH 05/10] RISC-V: erizo: add DEBUG_LL support Antony Pavlov
2018-04-15 11:28 ` [PATCH 06/10] RISC-V: erizo: enable NMON Antony Pavlov
2018-04-15 11:28 ` [PATCH 07/10] RISC-V: erizo: add nmon image creation Antony Pavlov
2018-04-17 6:34 ` Sascha Hauer
2018-04-15 11:28 ` [PATCH 08/10] RISC-V: add erizo_generic_defconfig Antony Pavlov
2018-04-15 11:28 ` [PATCH 09/10] scripts: add nmon-loader Antony Pavlov
2018-04-15 11:28 ` [PATCH 10/10] Documentation: add RISC-V docs Antony Pavlov
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox