From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: barebox@lists.infradead.org
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Subject: [PATCH 13/28] ARM: mmu: Replace hardcoded shifts with pgd_index() from Linux
Date: Tue, 8 May 2018 14:29:36 -0700 [thread overview]
Message-ID: <20180508212951.6446-14-andrew.smirnov@gmail.com> (raw)
In-Reply-To: <20180508212951.6446-1-andrew.smirnov@gmail.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
arch/arm/cpu/mmu.c | 12 ++++++------
arch/arm/cpu/mmu.h | 8 ++++++--
2 files changed, 12 insertions(+), 8 deletions(-)
diff --git a/arch/arm/cpu/mmu.c b/arch/arm/cpu/mmu.c
index 40bef016b..e0365eec1 100644
--- a/arch/arm/cpu/mmu.c
+++ b/arch/arm/cpu/mmu.c
@@ -96,7 +96,7 @@ static u32 *arm_create_pte(unsigned long virt)
if (!ttb)
arm_mmu_not_initialized_error();
- ttb[virt >> 20] = (unsigned long)table | PMD_TYPE_TABLE;
+ ttb[pgd_index(virt)] = (unsigned long)table | PMD_TYPE_TABLE;
for (i = 0; i < 256; i++) {
table[i] = virt | PTE_TYPE_SMALL | pte_flags_uncached;
@@ -113,7 +113,7 @@ static u32 *find_pte(unsigned long adr)
if (!ttb)
arm_mmu_not_initialized_error();
- if ((ttb[adr >> 20] & PMD_TYPE_MASK) != PMD_TYPE_TABLE) {
+ if ((ttb[pgd_index(adr)] & PMD_TYPE_MASK) != PMD_TYPE_TABLE) {
struct memory_bank *bank;
int i = 0;
@@ -132,7 +132,7 @@ static u32 *find_pte(unsigned long adr)
}
/* find the coarse page table base address */
- table = (u32 *)(ttb[adr >> 20] & ~0x3ff);
+ table = (u32 *)(ttb[pgd_index(adr)] & ~0x3ff);
/* find second level descriptor */
return &table[(adr >> PAGE_SHIFT) & 0xff];
@@ -197,7 +197,7 @@ void *map_io_sections(unsigned long phys, void *_start, size_t size)
unsigned long start = (unsigned long)_start, sec;
for (sec = start; sec < start + size; sec += (1 << 20), phys += SZ_1M)
- ttb[sec >> 20] = phys | PMD_SECT_DEF_UNCACHED;
+ ttb[pgd_index(sec)] = phys | PMD_SECT_DEF_UNCACHED;
dma_flush_range((unsigned long)ttb, (unsigned long)ttb + 0x4000);
tlb_invalidate();
@@ -211,8 +211,8 @@ void *map_io_sections(unsigned long phys, void *_start, size_t size)
static int arm_mmu_remap_sdram(struct memory_bank *bank)
{
unsigned long phys = (unsigned long)bank->start;
- unsigned long ttb_start = phys >> 20;
- unsigned long ttb_end = (phys >> 20) + (bank->size >> 20);
+ unsigned long ttb_start = pgd_index(phys);
+ unsigned long ttb_end = pgd_index(phys) + pgd_index(bank->size);
unsigned long num_ptes = bank->size >> 12;
int i, pte;
u32 *ptes;
diff --git a/arch/arm/cpu/mmu.h b/arch/arm/cpu/mmu.h
index 0b82cf738..1a650f10e 100644
--- a/arch/arm/cpu/mmu.h
+++ b/arch/arm/cpu/mmu.h
@@ -4,6 +4,10 @@
#include <asm/pgtable.h>
#include <linux/sizes.h>
+#define PGDIR_SHIFT 20
+
+#define pgd_index(addr) ((addr) >> PGDIR_SHIFT)
+
#ifdef CONFIG_MMU
void __mmu_cache_on(void);
void __mmu_cache_off(void);
@@ -31,8 +35,8 @@ static inline void
create_sections(uint32_t *ttb, unsigned long addr,
unsigned long long size, unsigned int flags)
{
- unsigned long ttb_start = add >> 20;
- unsigned long ttb_end = ttb_start + size >> 20;
+ unsigned long ttb_start = pgd_index(addr);
+ unsigned long ttb_end = ttb_start + pgd_index(size);
unsigned int i;
for (i = ttb_start; i < ttb_end; i++, addr += SZ_1M)
--
2.17.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2018-05-08 21:30 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-08 21:29 [PATCH 00/28] ARM MMU code improvements and on-demand PTE allocation Andrey Smirnov
2018-05-08 21:29 ` [PATCH 01/28] ARM: mmu: Remove unused ARM_VECTORS_SIZE Andrey Smirnov
2018-05-08 21:29 ` [PATCH 02/28] ARM: mmu: Make use of IS_ALIGNED in arm_mmu_remap_sdram() Andrey Smirnov
2018-05-08 21:29 ` [PATCH 03/28] ARM: mmu: Use ALIGN and ALIGN_DOWN in map_cachable() Andrey Smirnov
2018-05-08 21:29 ` [PATCH 04/28] ARM: mmu: Introduce set_ttbr() Andrey Smirnov
2018-05-08 21:29 ` [PATCH 05/28] ARM: mmu: Introduce set_domain() Andrey Smirnov
2018-05-08 21:29 ` [PATCH 06/28] ARM: mmu: Share code for create_sections() Andrey Smirnov
2018-05-08 21:29 ` [PATCH 07/28] ARM: mmu: Separate index and address in create_sections() Andrey Smirnov
2018-05-14 6:47 ` Sascha Hauer
2018-05-15 5:41 ` Andrey Smirnov
2018-05-08 21:29 ` [PATCH 08/28] sizes.h: Sync with Linux 4.16 Andrey Smirnov
2018-05-08 21:29 ` [PATCH 09/28] ARM: mmu: Specify size in bytes in create_sections() Andrey Smirnov
2018-05-14 6:52 ` Sascha Hauer
2018-05-15 5:42 ` Andrey Smirnov
2018-05-08 21:29 ` [PATCH 10/28] ARM: mmu: Share code for initial flat mapping creation Andrey Smirnov
2018-05-08 21:29 ` [PATCH 11/28] ARM: mmu: Share PMD_SECT_DEF_CACHED Andrey Smirnov
2018-05-08 21:29 ` [PATCH 12/28] ARM: mmu: Drop needless shifting in map_io_sections() Andrey Smirnov
2018-05-08 21:29 ` Andrey Smirnov [this message]
2018-05-08 21:29 ` [PATCH 14/28] ARM: mmu: Trivial simplification in arm_mmu_remap_sdram() Andrey Smirnov
2018-05-08 21:29 ` [PATCH 15/28] ARM: mmu: Replace various SZ_1M with PGDIR_SIZE Andrey Smirnov
2018-05-08 21:29 ` [PATCH 16/28] ARM: mmu: Use PAGE_SIZE when specifying size of one page Andrey Smirnov
2018-05-08 21:29 ` [PATCH 17/28] ARM: mmu: Define and use PTRS_PER_PTE Andrey Smirnov
2018-05-08 21:29 ` [PATCH 18/28] ARM: mmu: Use PAGE_SIZE instead of magic right shift by 12 Andrey Smirnov
2018-05-08 21:29 ` [PATCH 19/28] ARM: mmu: Use xmemalign in arm_create_pte() Andrey Smirnov
2018-05-08 21:29 ` [PATCH 20/28] ARM: mmu: Use xmemalign in mmu_init() Andrey Smirnov
2018-05-08 21:29 ` [PATCH 21/28] ARM: mmu: Share code between dma_alloc_*() functions Andrey Smirnov
2018-05-08 21:29 ` [PATCH 22/28] ARM: mmu: Pass PTE flags a parameter to arm_create_pte() Andrey Smirnov
2018-05-08 21:29 ` [PATCH 23/28] ARM: mmu: Make sure that address is 1M aligned in arm_create_pte() Andrey Smirnov
2018-05-08 21:29 ` [PATCH 24/28] ARM: mmu: Use find_pte() to find PTE in create_vector_table() Andrey Smirnov
2018-05-08 21:29 ` [PATCH 25/28] ARM: mmu: Use dma_inv_range() in dma_sync_single_for_cpu() Andrey Smirnov
2018-05-09 8:49 ` Lucas Stach
2018-05-08 21:29 ` [PATCH 26/28] ARM: mmu: Simplify the use of dma_flush_range() Andrey Smirnov
2018-05-09 8:48 ` Lucas Stach
2018-05-14 23:37 ` Andrey Smirnov
2018-05-08 21:29 ` [PATCH 27/28] ARM: mmu: Implement on-demand PTE allocation Andrey Smirnov
2018-05-08 21:29 ` [PATCH 28/28] ARM: mmu: Introduce ARM_TTB_SIZE Andrey Smirnov
2018-05-14 7:06 ` [PATCH 00/28] ARM MMU code improvements and on-demand PTE allocation Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180508212951.6446-14-andrew.smirnov@gmail.com \
--to=andrew.smirnov@gmail.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox