From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: barebox@lists.infradead.org
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Subject: [PATCH v2 26/28] ARM: mmu: Simplify the use of dma_flush_range()
Date: Wed, 16 May 2018 13:00:34 -0700 [thread overview]
Message-ID: <20180516200036.29829-27-andrew.smirnov@gmail.com> (raw)
In-Reply-To: <20180516200036.29829-1-andrew.smirnov@gmail.com>
Simplify the use of dma_flush_range() by changing its signature to
accept pointer to start of the data and data size. This change allows
us to avoid a whole bunch of repetitive arithmetic currently done by
all of the callers.
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
arch/arm/cpu/mmu.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/arch/arm/cpu/mmu.c b/arch/arm/cpu/mmu.c
index b14a869af..30f321691 100644
--- a/arch/arm/cpu/mmu.c
+++ b/arch/arm/cpu/mmu.c
@@ -142,8 +142,11 @@ static u32 *find_pte(unsigned long adr)
return &table[(adr >> PAGE_SHIFT) & 0xff];
}
-static void dma_flush_range(unsigned long start, unsigned long end)
+static void dma_flush_range(void *ptr, size_t size)
{
+ unsigned long start = (unsigned long)ptr;
+ unsigned long end = start + size;
+
__dma_flush_range(start, end);
if (outer_cache.flush_range)
outer_cache.flush_range(start, end);
@@ -170,9 +173,7 @@ static int __remap_range(void *_start, size_t size, u32 pte_flags)
p[i] |= pte_flags | PTE_TYPE_SMALL;
}
- dma_flush_range((unsigned long)p,
- (unsigned long)p + numentries * sizeof(u32));
-
+ dma_flush_range(p, numentries * sizeof(u32));
tlb_invalidate();
return 0;
@@ -203,7 +204,7 @@ void *map_io_sections(unsigned long phys, void *_start, size_t size)
for (sec = start; sec < start + size; sec += PGDIR_SIZE, phys += PGDIR_SIZE)
ttb[pgd_index(sec)] = phys | PMD_SECT_DEF_UNCACHED;
- dma_flush_range((unsigned long)ttb, (unsigned long)ttb + 0x4000);
+ dma_flush_range(ttb, 0x4000);
tlb_invalidate();
return _start;
}
@@ -249,9 +250,8 @@ static int arm_mmu_remap_sdram(struct memory_bank *bank)
pte += PTRS_PER_PTE;
}
- dma_flush_range((unsigned long)ttb, (unsigned long)ttb + 0x4000);
- dma_flush_range((unsigned long)ptes,
- (unsigned long)ptes + num_ptes * sizeof(u32));
+ dma_flush_range(ttb, 0x4000);
+ dma_flush_range(ptes, num_ptes * sizeof(u32));
tlb_invalidate();
--
2.17.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2018-05-16 20:01 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-16 20:00 [PATCH v2 00/28] ARM MMU code improvements and on-demand PTE allocation Andrey Smirnov
2018-05-16 20:00 ` [PATCH v2 01/28] ARM: mmu: Remove unused ARM_VECTORS_SIZE Andrey Smirnov
2018-05-16 20:00 ` [PATCH v2 02/28] ARM: mmu: Make use of IS_ALIGNED in arm_mmu_remap_sdram() Andrey Smirnov
2018-05-16 20:00 ` [PATCH v2 03/28] ARM: mmu: Use ALIGN and ALIGN_DOWN in map_cachable() Andrey Smirnov
2018-05-16 20:00 ` [PATCH v2 04/28] ARM: mmu: Introduce set_ttbr() Andrey Smirnov
2018-05-16 20:00 ` [PATCH v2 05/28] ARM: mmu: Introduce set_domain() Andrey Smirnov
2018-05-16 20:00 ` [PATCH v2 06/28] ARM: mmu: Share code for create_sections() Andrey Smirnov
2018-05-16 20:49 ` Sam Ravnborg
2018-05-17 0:10 ` Andrey Smirnov
2018-05-16 20:00 ` [PATCH v2 07/28] ARM: mmu: Separate index and address in create_sections() Andrey Smirnov
2018-05-16 20:52 ` Sam Ravnborg
2018-05-17 0:11 ` Andrey Smirnov
2018-05-16 20:00 ` [PATCH v2 08/28] sizes.h: Sync with Linux 4.16 Andrey Smirnov
2018-05-16 20:00 ` [PATCH v2 09/28] ARM: mmu: Specify size in bytes in create_sections() Andrey Smirnov
2018-05-17 6:55 ` Sascha Hauer
2018-05-17 7:01 ` Andrey Smirnov
2018-05-17 7:08 ` Sascha Hauer
2018-05-17 7:35 ` Andrey Smirnov
2018-05-17 9:24 ` Sascha Hauer
2018-05-16 20:00 ` [PATCH v2 10/28] ARM: mmu: Share code for initial flat mapping creation Andrey Smirnov
2018-05-16 20:00 ` [PATCH v2 11/28] ARM: mmu: Share PMD_SECT_DEF_CACHED Andrey Smirnov
2018-05-16 20:00 ` [PATCH v2 12/28] ARM: mmu: Drop needless shifting in map_io_sections() Andrey Smirnov
2018-05-16 20:00 ` [PATCH v2 13/28] ARM: mmu: Replace hardcoded shifts with pgd_index() from Linux Andrey Smirnov
2018-05-16 20:00 ` [PATCH v2 14/28] ARM: mmu: Trivial simplification in arm_mmu_remap_sdram() Andrey Smirnov
2018-05-16 20:00 ` [PATCH v2 15/28] ARM: mmu: Replace various SZ_1M with PGDIR_SIZE Andrey Smirnov
2018-05-16 20:00 ` [PATCH v2 16/28] ARM: mmu: Use PAGE_SIZE when specifying size of one page Andrey Smirnov
2018-05-16 20:00 ` [PATCH v2 17/28] ARM: mmu: Define and use PTRS_PER_PTE Andrey Smirnov
2018-05-16 20:00 ` [PATCH v2 18/28] ARM: mmu: Use PAGE_SIZE instead of magic right shift by 12 Andrey Smirnov
2018-05-16 20:00 ` [PATCH v2 19/28] ARM: mmu: Use xmemalign in arm_create_pte() Andrey Smirnov
2018-05-16 20:00 ` [PATCH v2 20/28] ARM: mmu: Use xmemalign in mmu_init() Andrey Smirnov
2018-05-16 20:00 ` [PATCH v2 21/28] ARM: mmu: Share code between dma_alloc_*() functions Andrey Smirnov
2018-05-16 20:00 ` [PATCH v2 22/28] ARM: mmu: Pass PTE flags a parameter to arm_create_pte() Andrey Smirnov
2018-05-16 20:00 ` [PATCH v2 23/28] ARM: mmu: Make sure that address is 1M aligned in arm_create_pte() Andrey Smirnov
2018-05-16 20:00 ` [PATCH v2 24/28] ARM: mmu: Use find_pte() to find PTE in create_vector_table() Andrey Smirnov
2018-05-16 20:00 ` [PATCH v2 25/28] ARM: mmu: Use dma_inv_range() in dma_sync_single_for_cpu() Andrey Smirnov
2018-05-16 20:00 ` Andrey Smirnov [this message]
2018-05-16 20:00 ` [PATCH v2 27/28] ARM: mmu: Implement on-demand PTE allocation Andrey Smirnov
2018-05-16 20:00 ` [PATCH v2 28/28] ARM: mmu: Introduce ARM_TTB_SIZE Andrey Smirnov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180516200036.29829-27-andrew.smirnov@gmail.com \
--to=andrew.smirnov@gmail.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox