From: Sam Ravnborg <sam@ravnborg.org>
To: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH v2 06/28] ARM: mmu: Share code for create_sections()
Date: Wed, 16 May 2018 22:49:29 +0200 [thread overview]
Message-ID: <20180516204929.GA12718@ravnborg.org> (raw)
In-Reply-To: <20180516200036.29829-7-andrew.smirnov@gmail.com>
Hi Andrey
On Wed, May 16, 2018 at 01:00:14PM -0700, Andrey Smirnov wrote:
> Regular MMU code never creates anything but 1:1 mapping, and barring
> that plus the call to __mmu_cache_flush(), early MMU code version of
> the function is pretty much identical. To avoid code duplication, move
> it to mmu.h and convert both regular and early MMU code to use it.
>
> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
> ---
> arch/arm/cpu/mmu-early.c | 14 ++------------
> arch/arm/cpu/mmu.c | 25 +++++++------------------
> arch/arm/cpu/mmu.h | 8 ++++++++
> 3 files changed, 17 insertions(+), 30 deletions(-)
>
> diff --git a/arch/arm/cpu/mmu-early.c b/arch/arm/cpu/mmu-early.c
> index f75cc7e4a..70ece0d2f 100644
> --- a/arch/arm/cpu/mmu-early.c
> +++ b/arch/arm/cpu/mmu-early.c
> @@ -11,22 +11,12 @@
>
> static uint32_t *ttb;
>
> -static void create_sections(unsigned long addr, int size_m, unsigned int flags)
> -{
> - int i;
> -
> - addr >>= 20;
> -
> - for (i = size_m; i > 0; i--, addr++)
> - ttb[addr] = (addr << 20) | flags;
> -}
This iterates in the for loop size_m times.
> -
> -static void create_sections(unsigned long virt, unsigned long phys, int size_m,
> - unsigned int flags)
> -{
> - int i;
> -
> - phys >>= 20;
> - virt >>= 20;
> -
> - for (i = size_m; i > 0; i--, virt++, phys++)
> - ttb[virt] = (phys << 20) | flags;
> -
> - __mmu_cache_flush();
> -}
likewise
> +++ b/arch/arm/cpu/mmu.h
> @@ -24,5 +24,13 @@ static inline void set_domain(unsigned val)
> asm volatile ("mcr p15,0,%0,c3,c0,0" : : "r"(val) /*:*/);
> }
>
> +static inline void
> +create_sections(uint32_t *ttb, unsigned long addr,
> + int size_m, unsigned int flags)
> +{
> + for (addr >>= 20; addr < size_m; addr++)
> + ttb[addr] = (addr << 20) | flags;
> +}
But this iterates in the for loop while addr >> 20 is less than size_m.
I cannot see from the code nor the changelog if this is an intentional change
(I only stumbled over this while browsing the patch, no testing done)
Sam
> +
>
> #endif /* __ARM_MMU_H */
> --
> 2.17.0
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2018-05-16 20:51 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-16 20:00 [PATCH v2 00/28] ARM MMU code improvements and on-demand PTE allocation Andrey Smirnov
2018-05-16 20:00 ` [PATCH v2 01/28] ARM: mmu: Remove unused ARM_VECTORS_SIZE Andrey Smirnov
2018-05-16 20:00 ` [PATCH v2 02/28] ARM: mmu: Make use of IS_ALIGNED in arm_mmu_remap_sdram() Andrey Smirnov
2018-05-16 20:00 ` [PATCH v2 03/28] ARM: mmu: Use ALIGN and ALIGN_DOWN in map_cachable() Andrey Smirnov
2018-05-16 20:00 ` [PATCH v2 04/28] ARM: mmu: Introduce set_ttbr() Andrey Smirnov
2018-05-16 20:00 ` [PATCH v2 05/28] ARM: mmu: Introduce set_domain() Andrey Smirnov
2018-05-16 20:00 ` [PATCH v2 06/28] ARM: mmu: Share code for create_sections() Andrey Smirnov
2018-05-16 20:49 ` Sam Ravnborg [this message]
2018-05-17 0:10 ` Andrey Smirnov
2018-05-16 20:00 ` [PATCH v2 07/28] ARM: mmu: Separate index and address in create_sections() Andrey Smirnov
2018-05-16 20:52 ` Sam Ravnborg
2018-05-17 0:11 ` Andrey Smirnov
2018-05-16 20:00 ` [PATCH v2 08/28] sizes.h: Sync with Linux 4.16 Andrey Smirnov
2018-05-16 20:00 ` [PATCH v2 09/28] ARM: mmu: Specify size in bytes in create_sections() Andrey Smirnov
2018-05-17 6:55 ` Sascha Hauer
2018-05-17 7:01 ` Andrey Smirnov
2018-05-17 7:08 ` Sascha Hauer
2018-05-17 7:35 ` Andrey Smirnov
2018-05-17 9:24 ` Sascha Hauer
2018-05-16 20:00 ` [PATCH v2 10/28] ARM: mmu: Share code for initial flat mapping creation Andrey Smirnov
2018-05-16 20:00 ` [PATCH v2 11/28] ARM: mmu: Share PMD_SECT_DEF_CACHED Andrey Smirnov
2018-05-16 20:00 ` [PATCH v2 12/28] ARM: mmu: Drop needless shifting in map_io_sections() Andrey Smirnov
2018-05-16 20:00 ` [PATCH v2 13/28] ARM: mmu: Replace hardcoded shifts with pgd_index() from Linux Andrey Smirnov
2018-05-16 20:00 ` [PATCH v2 14/28] ARM: mmu: Trivial simplification in arm_mmu_remap_sdram() Andrey Smirnov
2018-05-16 20:00 ` [PATCH v2 15/28] ARM: mmu: Replace various SZ_1M with PGDIR_SIZE Andrey Smirnov
2018-05-16 20:00 ` [PATCH v2 16/28] ARM: mmu: Use PAGE_SIZE when specifying size of one page Andrey Smirnov
2018-05-16 20:00 ` [PATCH v2 17/28] ARM: mmu: Define and use PTRS_PER_PTE Andrey Smirnov
2018-05-16 20:00 ` [PATCH v2 18/28] ARM: mmu: Use PAGE_SIZE instead of magic right shift by 12 Andrey Smirnov
2018-05-16 20:00 ` [PATCH v2 19/28] ARM: mmu: Use xmemalign in arm_create_pte() Andrey Smirnov
2018-05-16 20:00 ` [PATCH v2 20/28] ARM: mmu: Use xmemalign in mmu_init() Andrey Smirnov
2018-05-16 20:00 ` [PATCH v2 21/28] ARM: mmu: Share code between dma_alloc_*() functions Andrey Smirnov
2018-05-16 20:00 ` [PATCH v2 22/28] ARM: mmu: Pass PTE flags a parameter to arm_create_pte() Andrey Smirnov
2018-05-16 20:00 ` [PATCH v2 23/28] ARM: mmu: Make sure that address is 1M aligned in arm_create_pte() Andrey Smirnov
2018-05-16 20:00 ` [PATCH v2 24/28] ARM: mmu: Use find_pte() to find PTE in create_vector_table() Andrey Smirnov
2018-05-16 20:00 ` [PATCH v2 25/28] ARM: mmu: Use dma_inv_range() in dma_sync_single_for_cpu() Andrey Smirnov
2018-05-16 20:00 ` [PATCH v2 26/28] ARM: mmu: Simplify the use of dma_flush_range() Andrey Smirnov
2018-05-16 20:00 ` [PATCH v2 27/28] ARM: mmu: Implement on-demand PTE allocation Andrey Smirnov
2018-05-16 20:00 ` [PATCH v2 28/28] ARM: mmu: Introduce ARM_TTB_SIZE Andrey Smirnov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180516204929.GA12718@ravnborg.org \
--to=sam@ravnborg.org \
--cc=andrew.smirnov@gmail.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox