mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: barebox@lists.infradead.org
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Subject: [PATCH v2 32/48] Port <linux/iopoll.h> from U-Boot
Date: Sat, 26 May 2018 13:44:35 -0700	[thread overview]
Message-ID: <20180526204451.16530-33-andrew.smirnov@gmail.com> (raw)
In-Reply-To: <20180526204451.16530-1-andrew.smirnov@gmail.com>

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
 include/linux/iopoll.h | 69 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 69 insertions(+)
 create mode 100644 include/linux/iopoll.h

diff --git a/include/linux/iopoll.h b/include/linux/iopoll.h
new file mode 100644
index 000000000..6e8a6fd71
--- /dev/null
+++ b/include/linux/iopoll.h
@@ -0,0 +1,69 @@
+/*
+ * Copyright (c) 2012-2014 The Linux Foundation. All rights reserved.
+ *
+ * SPDX-License-Identifier:	GPL-2.0
+ */
+
+#ifndef _LINUX_IOPOLL_H
+#define _LINUX_IOPOLL_H
+
+#include <errno.h>
+#include <io.h>
+#include <clock.h>
+
+/**
+ * readx_poll_timeout - Periodically poll an address until a condition is met or a timeout occurs
+ * @op: accessor function (takes @addr as its only argument)
+ * @addr: Address to poll
+ * @val: Variable to read the value into
+ * @cond: Break condition (usually involving @val)
+ * @timeout_ns: Timeout in ns, 0 means never timeout
+ *
+ * Returns 0 on success and -ETIMEDOUT upon a timeout. In either
+ * case, the last read value at @addr is stored in @val.
+ *
+ * When available, you'll probably want to use one of the specialized
+ * macros defined below rather than this macro directly.
+ */
+#define readx_poll_timeout(op, addr, val, cond, timeout_ns)	\
+({ \
+	uint64_t start = get_time_ns(); \
+	for (;;) { \
+		(val) = op(addr); \
+		if (cond) \
+			break; \
+		if (timeout_ns && \
+		    is_timeout(start, (timeout_ns))) {	\
+			(val) = op(addr); \
+			break; \
+		} \
+	} \
+	(cond) ? 0 : -ETIMEDOUT; \
+})
+
+
+#define readb_poll_timeout(addr, val, cond, timeout_us) \
+	readx_poll_timeout(readb, addr, val, cond, timeout_us)
+
+#define readw_poll_timeout(addr, val, cond, timeout_us) \
+	readx_poll_timeout(readw, addr, val, cond, timeout_us)
+
+#define readl_poll_timeout(addr, val, cond, timeout_us) \
+	readx_poll_timeout(readl, addr, val, cond, timeout_us)
+
+#define readq_poll_timeout(addr, val, cond, timeout_us) \
+	readx_poll_timeout(readq, addr, val, cond, timeout_us)
+
+#define readb_relaxed_poll_timeout(addr, val, cond, timeout_us) \
+	readx_poll_timeout(readb_relaxed, addr, val, cond, timeout_us)
+
+#define readw_relaxed_poll_timeout(addr, val, cond, timeout_us) \
+	readx_poll_timeout(readw_relaxed, addr, val, cond, timeout_us)
+
+#define readl_relaxed_poll_timeout(addr, val, cond, timeout_us) \
+	readx_poll_timeout(readl_relaxed, addr, val, cond, timeout_us)
+
+#define readq_relaxed_poll_timeout(addr, val, cond, timeout_us) \
+	readx_poll_timeout(readq_relaxed, addr, val, cond, timeout_us)
+
+#endif /* _LINUX_IOPOLL_H */
-- 
2.17.0


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2018-05-26 20:47 UTC|newest]

Thread overview: 57+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-26 20:44 [PATCH v2 00/48] ARM: i.MX8MQ and EVK support Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 01/48] ARM: i.MX: xload: Fix compiler warning Andrey Smirnov
2018-05-27  7:28   ` Sam Ravnborg
2018-05-28  1:03     ` Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 02/48] ARM: i.MX: compile arm32 specific errata only for CPU32 Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 03/48] ARM: Add i.MX8 support Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 04/48] aarch64: Add i.MX8 debug UART support Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 05/48] Include our own include/dt-bindings Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 06/48] mci: imx-esdhc: use dma mapping functions Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 07/48] net: fec_imx: remove unnecessary DMA sync ops Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 08/48] net: fec_imx: Use dma mapping functions Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 09/48] net: fec_imx: Make use of IS_ALIGNED Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 10/48] clock: Add i.MX8MQ clock driver Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 11/48] serial: i.MX: Add i.MX8 support Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 12/48] mmc: i.MX esdhc: " Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 13/48] gpio: i.MX: Add i.MX8mq support Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 14/48] ARM: i.MX: ocotp: Add i.MX8MQ support Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 15/48] ARM: i.MX: Split shared CCM code into a separate file Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 16/48] ARM: i.MX: Add IOMUX pad constants for i.MX8 Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 17/48] scripts/imx: Add trivial i.MX8 support Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 18/48] ARM: i.MX: Add basic CCM constants for i.MX8 Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 19/48] ARM: Add constants and helpers for system counter interface Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 20/48] clocksource: armv8-timer: Convert explicit assembly into helpers Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 21/48] ARM: i.MX8: Initialize system counter Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 22/48] ARM: i.MX: boot: Fix address casting on 64-bit platforms Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 23/48] ARM: boot: Add trivial i.MX8 support Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 24/48] ARM: i.MX: xload-esdhc: Rework to make code be less i.MX6-specific Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 25/48] ARM: i.MX: xload-esdhc: Allow custom buffer address, device offset Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 26/48] ARM: i.MX: xload-esdhc: Add support for i.MX8 Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 27/48] pinctrl: i.MX: " Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 28/48] Documentation: imx: Change block size for 'dd' to 1024 Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 29/48] Documentation: i.MX: Add missing <soctype> Andrey Smirnov
2018-05-28 15:23   ` Sascha Hauer
2018-05-28 18:02     ` Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 30/48] clocksource: armv8-timer: Make armv8_clocksource_read() static Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 31/48] clocksource: armv8-timer: Make use of postcore_platform_driver() Andrey Smirnov
2018-05-26 20:44 ` Andrey Smirnov [this message]
2018-05-26 20:44 ` [PATCH v2 33/48] common/clock: Move delay and timeout functions to clock.h Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 34/48] clock: Use udelay() to implement mdelay() Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 35/48] ARM: i.MX8: Add DDRC PHY and DDR CTL base addresses Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 36/48] ARM: i.MX8: Add DDRC PHY support code Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 37/48] ARM: Specify HAVE_PBL_IMAGE for CPU_64 Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 38/48] ARM: lib64: Make string functions aware of MMU configuration Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 39/48] ARM: mmu: Make use of dsb() and isb() helpers Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 40/48] ARM: cache: Remove unused cache ops struct Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 41/48] ARM: no-mmu: Disable building for ARMv8 Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 42/48] ARM: interrupts64: Include ESR value in exception traceback Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 43/48] ARM: mmu64: Trivial code simplification Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 44/48] ARM: mmu64: Make use of create_table() Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 45/48] ARM: mmu64: Convert flags in arch_remap_range() Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 46/48] ARM: include: dma: Add missing no-MMU stubs Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 47/48] ARM: i.MX8: Add i.MX8mq EVK support Andrey Smirnov
2018-05-28 15:51   ` Sascha Hauer
2018-05-28 18:04     ` Andrey Smirnov
2018-05-28 16:04   ` Sascha Hauer
2018-05-28 18:07     ` Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 48/48] ARM: Introduce imx_v8_defconfig Andrey Smirnov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180526204451.16530-33-andrew.smirnov@gmail.com \
    --to=andrew.smirnov@gmail.com \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox