mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: barebox@lists.infradead.org
Subject: [PATCH v2 06/48] mci: imx-esdhc: use dma mapping functions
Date: Sat, 26 May 2018 13:44:09 -0700	[thread overview]
Message-ID: <20180526204451.16530-7-andrew.smirnov@gmail.com> (raw)
In-Reply-To: <20180526204451.16530-1-andrew.smirnov@gmail.com>

From: Sascha Hauer <s.hauer@pengutronix.de>

Rather than relying on the fact that addresses can be just casted
into DMA addresses use proper DMA mapping functions.

This fixes compiler warnings when we do DMA on this 32bit only device
on aarch64 SoCs.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/mci/imx-esdhc.c | 53 ++++++++++++++++++++---------------------
 1 file changed, 26 insertions(+), 27 deletions(-)

diff --git a/drivers/mci/imx-esdhc.c b/drivers/mci/imx-esdhc.c
index b91f94b99..8929901d4 100644
--- a/drivers/mci/imx-esdhc.c
+++ b/drivers/mci/imx-esdhc.c
@@ -211,18 +211,14 @@ esdhc_pio_read_write(struct mci_host *mci, struct mci_data *data)
 	return 0;
 }
 
-static int esdhc_setup_data(struct mci_host *mci, struct mci_data *data)
+static int esdhc_setup_data(struct mci_host *mci, struct mci_data *data,
+			    dma_addr_t dma)
 {
 	struct fsl_esdhc_host *host = to_fsl_esdhc(mci);
 	void __iomem *regs = host->regs;
 	u32 wml_value;
 
-	if (IS_ENABLED(CONFIG_MCI_IMX_ESDHC_PIO)) {
-		if (!(data->flags & MMC_DATA_READ))
-			esdhc_write32(regs + SDHCI_DMA_ADDRESS, (u32)data->src);
-		else
-			esdhc_write32(regs + SDHCI_DMA_ADDRESS, (u32)data->dest);
-	} else {
+	if (!IS_ENABLED(CONFIG_MCI_IMX_ESDHC_PIO)) {
 		wml_value = data->blocksize/4;
 
 		if (data->flags & MMC_DATA_READ) {
@@ -230,15 +226,14 @@ static int esdhc_setup_data(struct mci_host *mci, struct mci_data *data)
 				wml_value = 0x10;
 
 			esdhc_clrsetbits32(regs + IMX_SDHCI_WML, WML_RD_WML_MASK, wml_value);
-			esdhc_write32(regs + SDHCI_DMA_ADDRESS, (u32)data->dest);
 		} else {
 			if (wml_value > 0x80)
 				wml_value = 0x80;
 
 			esdhc_clrsetbits32(regs + IMX_SDHCI_WML, WML_WR_WML_MASK,
 						wml_value << 16);
-			esdhc_write32(regs + SDHCI_DMA_ADDRESS, (u32)data->src);
 		}
+		esdhc_write32(regs + SDHCI_DMA_ADDRESS, dma);
 	}
 
 	esdhc_write32(regs + SDHCI_BLOCK_SIZE__BLOCK_COUNT, data->blocks << 16 | data->blocksize);
@@ -250,7 +245,6 @@ static int esdhc_do_data(struct mci_host *mci, struct mci_data *data)
 {
 	struct fsl_esdhc_host *host = to_fsl_esdhc(mci);
 	void __iomem *regs = host->regs;
-	unsigned int num_bytes = data->blocks * data->blocksize;
 	u32 irqstat;
 
 	if (IS_ENABLED(CONFIG_MCI_IMX_ESDHC_PIO))
@@ -267,13 +261,6 @@ static int esdhc_do_data(struct mci_host *mci, struct mci_data *data)
 	} while (!(irqstat & IRQSTAT_TC) &&
 		(esdhc_read32(regs + SDHCI_PRESENT_STATE) & PRSSTAT_DLA));
 
-	if (data->flags & MMC_DATA_WRITE)
-		dma_sync_single_for_cpu((unsigned long)data->src,
-					num_bytes, DMA_TO_DEVICE);
-	else
-		dma_sync_single_for_cpu((unsigned long)data->dest,
-					num_bytes, DMA_FROM_DEVICE);
-
 	return 0;
 }
 
@@ -290,6 +277,9 @@ esdhc_send_cmd(struct mci_host *mci, struct mci_cmd *cmd, struct mci_data *data)
 	void __iomem *regs = host->regs;
 	unsigned int num_bytes = 0;
 	int ret;
+	void *ptr;
+	enum dma_data_direction dir = 0;
+	dma_addr_t dma = 0;
 
 	esdhc_write32(regs + SDHCI_INT_STATUS, -1);
 
@@ -300,19 +290,25 @@ esdhc_send_cmd(struct mci_host *mci, struct mci_cmd *cmd, struct mci_data *data)
 	if (data) {
 		int err;
 
-		err = esdhc_setup_data(mci, data);
-		if(err)
-			return err;
+		if (!IS_ENABLED(CONFIG_MCI_IMX_ESDHC_PIO)) {
+			num_bytes = data->blocks * data->blocksize;
 
-		num_bytes = data->blocks * data->blocksize;
+			if (data->flags & MMC_DATA_WRITE) {
+				ptr = (void *)data->src;
+				dir = DMA_TO_DEVICE;
+			} else {
+				ptr = data->dest;
+				dir = DMA_FROM_DEVICE;
+			}
 
-		if (data->flags & MMC_DATA_WRITE)
-			dma_sync_single_for_device((unsigned long)data->src,
-						   num_bytes, DMA_TO_DEVICE);
-		else
-			dma_sync_single_for_device((unsigned long)data->dest,
-						   num_bytes, DMA_FROM_DEVICE);
+			dma = dma_map_single(host->dev, ptr, num_bytes, dir);
+			if (dma_mapping_error(host->dev, dma))
+				return -EIO;
+		}
 
+		err = esdhc_setup_data(mci, data, dma);
+		if(err)
+			return err;
 	}
 
 	/* Figure out the transfer arguments */
@@ -383,6 +379,9 @@ esdhc_send_cmd(struct mci_host *mci, struct mci_cmd *cmd, struct mci_data *data)
 		ret = esdhc_do_data(mci, data);
 		if (ret)
 			return ret;
+
+		if (!IS_ENABLED(CONFIG_MCI_IMX_ESDHC_PIO))
+			dma_unmap_single(host->dev, dma, num_bytes, dir);
 	}
 
 	esdhc_write32(regs + SDHCI_INT_STATUS, -1);
-- 
2.17.0


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2018-05-26 20:46 UTC|newest]

Thread overview: 57+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-26 20:44 [PATCH v2 00/48] ARM: i.MX8MQ and EVK support Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 01/48] ARM: i.MX: xload: Fix compiler warning Andrey Smirnov
2018-05-27  7:28   ` Sam Ravnborg
2018-05-28  1:03     ` Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 02/48] ARM: i.MX: compile arm32 specific errata only for CPU32 Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 03/48] ARM: Add i.MX8 support Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 04/48] aarch64: Add i.MX8 debug UART support Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 05/48] Include our own include/dt-bindings Andrey Smirnov
2018-05-26 20:44 ` Andrey Smirnov [this message]
2018-05-26 20:44 ` [PATCH v2 07/48] net: fec_imx: remove unnecessary DMA sync ops Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 08/48] net: fec_imx: Use dma mapping functions Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 09/48] net: fec_imx: Make use of IS_ALIGNED Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 10/48] clock: Add i.MX8MQ clock driver Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 11/48] serial: i.MX: Add i.MX8 support Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 12/48] mmc: i.MX esdhc: " Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 13/48] gpio: i.MX: Add i.MX8mq support Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 14/48] ARM: i.MX: ocotp: Add i.MX8MQ support Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 15/48] ARM: i.MX: Split shared CCM code into a separate file Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 16/48] ARM: i.MX: Add IOMUX pad constants for i.MX8 Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 17/48] scripts/imx: Add trivial i.MX8 support Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 18/48] ARM: i.MX: Add basic CCM constants for i.MX8 Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 19/48] ARM: Add constants and helpers for system counter interface Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 20/48] clocksource: armv8-timer: Convert explicit assembly into helpers Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 21/48] ARM: i.MX8: Initialize system counter Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 22/48] ARM: i.MX: boot: Fix address casting on 64-bit platforms Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 23/48] ARM: boot: Add trivial i.MX8 support Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 24/48] ARM: i.MX: xload-esdhc: Rework to make code be less i.MX6-specific Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 25/48] ARM: i.MX: xload-esdhc: Allow custom buffer address, device offset Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 26/48] ARM: i.MX: xload-esdhc: Add support for i.MX8 Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 27/48] pinctrl: i.MX: " Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 28/48] Documentation: imx: Change block size for 'dd' to 1024 Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 29/48] Documentation: i.MX: Add missing <soctype> Andrey Smirnov
2018-05-28 15:23   ` Sascha Hauer
2018-05-28 18:02     ` Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 30/48] clocksource: armv8-timer: Make armv8_clocksource_read() static Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 31/48] clocksource: armv8-timer: Make use of postcore_platform_driver() Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 32/48] Port <linux/iopoll.h> from U-Boot Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 33/48] common/clock: Move delay and timeout functions to clock.h Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 34/48] clock: Use udelay() to implement mdelay() Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 35/48] ARM: i.MX8: Add DDRC PHY and DDR CTL base addresses Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 36/48] ARM: i.MX8: Add DDRC PHY support code Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 37/48] ARM: Specify HAVE_PBL_IMAGE for CPU_64 Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 38/48] ARM: lib64: Make string functions aware of MMU configuration Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 39/48] ARM: mmu: Make use of dsb() and isb() helpers Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 40/48] ARM: cache: Remove unused cache ops struct Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 41/48] ARM: no-mmu: Disable building for ARMv8 Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 42/48] ARM: interrupts64: Include ESR value in exception traceback Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 43/48] ARM: mmu64: Trivial code simplification Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 44/48] ARM: mmu64: Make use of create_table() Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 45/48] ARM: mmu64: Convert flags in arch_remap_range() Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 46/48] ARM: include: dma: Add missing no-MMU stubs Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 47/48] ARM: i.MX8: Add i.MX8mq EVK support Andrey Smirnov
2018-05-28 15:51   ` Sascha Hauer
2018-05-28 18:04     ` Andrey Smirnov
2018-05-28 16:04   ` Sascha Hauer
2018-05-28 18:07     ` Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 48/48] ARM: Introduce imx_v8_defconfig Andrey Smirnov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180526204451.16530-7-andrew.smirnov@gmail.com \
    --to=andrew.smirnov@gmail.com \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox