From: Sascha Hauer <s.hauer@pengutronix.de>
To: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH v2 47/48] ARM: i.MX8: Add i.MX8mq EVK support
Date: Mon, 28 May 2018 18:04:12 +0200 [thread overview]
Message-ID: <20180528160412.sprzpllamhnxt7wb@pengutronix.de> (raw)
In-Reply-To: <20180526204451.16530-48-andrew.smirnov@gmail.com>
On Sat, May 26, 2018 at 01:44:50PM -0700, Andrey Smirnov wrote:
> From: Sascha Hauer <s.hauer@pengutronix.de>
>
> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
> +
> +#define reg32_write(a, v) writel(v, a)
> +#define reg32_read(a) readl(a)
> +
> +#define DDRC_DDR_SS_GPR0 0x3d000000
> +
> +#define DDRC_IPS_BASE_ADDR(X) (0x3d400000 + (X * 0x2000000))
> +#define DDRC_IPS_BASE_ADDR_0 0x3f400000
> +
> +#define DDRC_MSTR_0 0x3d400000
> +#define DDRC_STAT_0 0x3d400004
> +#define DDRC_MSTR1_0 0x3d400008
> +#define DDRC_MRCTRL0_0 0x3d400010
These are all i.MX8M register defines, right? They shouldn't live in the
board support.
> diff --git a/arch/arm/boards/nxp-imx8mq-evk/ddr_init.c b/arch/arm/boards/nxp-imx8mq-evk/ddr_init.c
> new file mode 100644
> index 000000000..81691b2fa
> --- /dev/null
> +void ddr_init(void)
> +{
> + tmp=reg32_read(0x30360060);
> + tmp &= ~0x10;
> + reg32_write(0x30360060,tmp);
> + do{
> + tmp=reg32_read(0x30360060);
> + if(tmp&0x80000000) break;
> + }while(1);
> + reg32_write(0x30391000,0x8f000006);
> + reg32_write(0x3d400304,0x1);
> + reg32_write(0x3d400030,0x1);
Do we need the defines anyway when the generated code uses raw adresses
and not the defines?
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2018-05-28 16:04 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-26 20:44 [PATCH v2 00/48] ARM: i.MX8MQ and " Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 01/48] ARM: i.MX: xload: Fix compiler warning Andrey Smirnov
2018-05-27 7:28 ` Sam Ravnborg
2018-05-28 1:03 ` Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 02/48] ARM: i.MX: compile arm32 specific errata only for CPU32 Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 03/48] ARM: Add i.MX8 support Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 04/48] aarch64: Add i.MX8 debug UART support Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 05/48] Include our own include/dt-bindings Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 06/48] mci: imx-esdhc: use dma mapping functions Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 07/48] net: fec_imx: remove unnecessary DMA sync ops Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 08/48] net: fec_imx: Use dma mapping functions Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 09/48] net: fec_imx: Make use of IS_ALIGNED Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 10/48] clock: Add i.MX8MQ clock driver Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 11/48] serial: i.MX: Add i.MX8 support Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 12/48] mmc: i.MX esdhc: " Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 13/48] gpio: i.MX: Add i.MX8mq support Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 14/48] ARM: i.MX: ocotp: Add i.MX8MQ support Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 15/48] ARM: i.MX: Split shared CCM code into a separate file Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 16/48] ARM: i.MX: Add IOMUX pad constants for i.MX8 Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 17/48] scripts/imx: Add trivial i.MX8 support Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 18/48] ARM: i.MX: Add basic CCM constants for i.MX8 Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 19/48] ARM: Add constants and helpers for system counter interface Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 20/48] clocksource: armv8-timer: Convert explicit assembly into helpers Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 21/48] ARM: i.MX8: Initialize system counter Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 22/48] ARM: i.MX: boot: Fix address casting on 64-bit platforms Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 23/48] ARM: boot: Add trivial i.MX8 support Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 24/48] ARM: i.MX: xload-esdhc: Rework to make code be less i.MX6-specific Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 25/48] ARM: i.MX: xload-esdhc: Allow custom buffer address, device offset Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 26/48] ARM: i.MX: xload-esdhc: Add support for i.MX8 Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 27/48] pinctrl: i.MX: " Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 28/48] Documentation: imx: Change block size for 'dd' to 1024 Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 29/48] Documentation: i.MX: Add missing <soctype> Andrey Smirnov
2018-05-28 15:23 ` Sascha Hauer
2018-05-28 18:02 ` Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 30/48] clocksource: armv8-timer: Make armv8_clocksource_read() static Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 31/48] clocksource: armv8-timer: Make use of postcore_platform_driver() Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 32/48] Port <linux/iopoll.h> from U-Boot Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 33/48] common/clock: Move delay and timeout functions to clock.h Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 34/48] clock: Use udelay() to implement mdelay() Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 35/48] ARM: i.MX8: Add DDRC PHY and DDR CTL base addresses Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 36/48] ARM: i.MX8: Add DDRC PHY support code Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 37/48] ARM: Specify HAVE_PBL_IMAGE for CPU_64 Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 38/48] ARM: lib64: Make string functions aware of MMU configuration Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 39/48] ARM: mmu: Make use of dsb() and isb() helpers Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 40/48] ARM: cache: Remove unused cache ops struct Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 41/48] ARM: no-mmu: Disable building for ARMv8 Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 42/48] ARM: interrupts64: Include ESR value in exception traceback Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 43/48] ARM: mmu64: Trivial code simplification Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 44/48] ARM: mmu64: Make use of create_table() Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 45/48] ARM: mmu64: Convert flags in arch_remap_range() Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 46/48] ARM: include: dma: Add missing no-MMU stubs Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 47/48] ARM: i.MX8: Add i.MX8mq EVK support Andrey Smirnov
2018-05-28 15:51 ` Sascha Hauer
2018-05-28 18:04 ` Andrey Smirnov
2018-05-28 16:04 ` Sascha Hauer [this message]
2018-05-28 18:07 ` Andrey Smirnov
2018-05-26 20:44 ` [PATCH v2 48/48] ARM: Introduce imx_v8_defconfig Andrey Smirnov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180528160412.sprzpllamhnxt7wb@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=andrew.smirnov@gmail.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox