From: Sascha Hauer <s.hauer@pengutronix.de>
To: Sam Ravnborg <sam@ravnborg.org>
Cc: Barebox List <barebox@lists.infradead.org>
Subject: Re: Kernel fails to start on at91sam9263 target
Date: Mon, 4 Jun 2018 09:58:21 +0200 [thread overview]
Message-ID: <20180604075821.pu4tuecex74pcwmk@pengutronix.de> (raw)
In-Reply-To: <20180603211416.GA25216@ravnborg.org>
On Sun, Jun 03, 2018 at 11:14:16PM +0200, Sam Ravnborg wrote:
> Hi all.
>
> I have a proprietary target with an AT91SAM9263 CPU.
> I have at91bootstrap running and barebox load fine.
>
> When I try to boot the kernel it stop after Uncompressing...
>
> Log snip:
>
> chunk_get_cached: found 7287 in 7
> fat_read: 0 3421056 3421056 23bab76c
> OF: ** translation for device /ahb/nor_flash@10000000 **
> OF: bus is default (na=1, ns=1) on /ahb
> OF: parent bus is default (na=1, ns=1) on
> OF: empty ranges; 1:1 translation
> OF: with offset: 10000000
> OF: reached root node
> OF: ** translation for device /ahb/nor_flash@10000000 **
> OF: bus is default (na=1, ns=1) on /ahb
> OF: parent bus is default (na=1, ns=1) on
> OF: empty ranges; 1:1 translation
> OF: with offset: 10000000
> OF: reached root node
> eth_of_fixup_node: no valid mac address, cannot fixup
> __request_region ok: 0x21495000:0x2149c300
> commandline: root=/dev/disk0.1 rootfstype=ext4 rw rootwait console=ttyS0,115200
> booting kernel with devicetree
> exitcall-> 0x23e073c0
> exitcall-> 0x23e0c004
> exitcall-> 0x23e415c8
> Uncompressing Linux... done, booting the kernel.
>
>
> The barebox commands to boot the kernel was:
> $ mount -a
> $ bootm /mnt/disk0.0/zImage
The output of bootm -v might be useful. Have you tried earlyprintk or
earlyconsole?
You have specified the memory in the devicetree. This should not
disturb, but looks unnecessary.
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2018-06-04 7:58 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-03 21:14 Sam Ravnborg
2018-06-04 7:58 ` Sascha Hauer [this message]
2018-06-04 8:23 ` Sam Ravnborg
2018-06-04 18:18 ` Sam Ravnborg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180604075821.pu4tuecex74pcwmk@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=sam@ravnborg.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox