From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:67c:670:201:290:27ff:fe1d:cc33]) by bombadil.infradead.org with esmtps (Exim 4.90_1 #2 (Red Hat Linux)) id 1fPpX5-0006VG-LG for barebox@lists.infradead.org; Mon, 04 Jun 2018 13:28:31 +0000 Date: Mon, 4 Jun 2018 15:28:10 +0200 From: Roland Hieber Message-ID: <20180604132810.aklcl4kvajjxofmj@pengutronix.de> References: <20180522081637.b2mm4raotn5ggqsb@pengutronix.de> MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: RaspberryPi 1/2(/3) To: Pascal Vizeli Cc: barebox@lists.infradead.org On Tue, May 22, 2018 at 07:38:52PM +0200, Pascal Vizeli wrote: > With debug modus it works perfect :) Look like the Serial console is > not exists (PL011). > Is that a problem with changed/updated DTS files? If this is still relevant, you could try fiddling a bit with the UART options [1] in /boot/config.txt of the RPi firmware (e.g. enable_uart and dtoverlay=pi3-miniuart-bt). AFAIR the firmware itself sets up the chip with its own device tree and applies device tree overlays. But this is only necessary for RPi 2+, iirc. [1]: https://www.raspberrypi.org/documentation/configuration/uart.md - Roland -- Roland Hieber | r.hieber@pengutronix.de | Pengutronix e.K. | https://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim | Phone: +49-5121-206917-5086 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox