From: Oleksij Rempel <o.rempel@pengutronix.de>
To: barebox@lists.infradead.org
Cc: Oleksij Rempel <linux@rempel-privat.de>
Subject: [PATCH v2 1/3] MIPS: ath79: provide driver for Atheros ART partition
Date: Thu, 7 Jun 2018 21:55:50 +0200 [thread overview]
Message-ID: <20180607195552.15246-1-o.rempel@pengutronix.de> (raw)
From: Oleksij Rempel <linux@rempel-privat.de>
this partition contains calibration data for WiFi and
some board specific data, like MAC address.
For now we care only about MAC.
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
---
arch/mips/mach-ath79/Makefile | 1 +
arch/mips/mach-ath79/art.c | 112 ++++++++++++++++++++++++++++++++++
2 files changed, 113 insertions(+)
create mode 100644 arch/mips/mach-ath79/art.c
diff --git a/arch/mips/mach-ath79/Makefile b/arch/mips/mach-ath79/Makefile
index 3772daeba..b827b363c 100644
--- a/arch/mips/mach-ath79/Makefile
+++ b/arch/mips/mach-ath79/Makefile
@@ -1,2 +1,3 @@
obj-y += reset.o
obj-y += bbu.o
+obj-y += art.o
diff --git a/arch/mips/mach-ath79/art.c b/arch/mips/mach-ath79/art.c
new file mode 100644
index 000000000..984d08736
--- /dev/null
+++ b/arch/mips/mach-ath79/art.c
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: GPL-2.
+/*
+ * Copyright (c) 2018 Oleksij Rempel <linux@rempel-privat.de>
+ */
+
+#include <common.h>
+#include <fcntl.h>
+#include <init.h>
+#include <libfile.h>
+#include <net.h>
+#include <unistd.h>
+
+#define AR93000_EPPROM_OFFSET 0x1000
+
+struct ar9300_eeprom {
+ u8 eeprom_version;
+ u8 template_version;
+ u8 mac_addr[6];
+};
+
+static int art_set_mac(struct device_d *dev, struct ar9300_eeprom *eeprom)
+{
+ struct device_node *node = dev->device_node;
+ struct device_node *rnode;
+
+ if (!node)
+ return -ENOENT;
+
+ rnode = of_parse_phandle_from(node, NULL,
+ "barebox,provide-mac-address", 0);
+ if (!rnode)
+ return -ENOENT;
+
+ of_eth_register_ethaddr(rnode, &eeprom->mac_addr[0]);
+
+ return 0;
+}
+
+static int art_read_mac(struct device_d *dev, const char *file)
+{
+ int fd, rbytes;
+ struct ar9300_eeprom eeprom;
+
+ fd = open_and_lseek(file, O_RDONLY, AR93000_EPPROM_OFFSET);
+ if (fd < 0) {
+ dev_err(dev, "Failed to open eeprom path %s %d\n",
+ file, fd);
+ return fd;
+ }
+
+ rbytes = read_full(fd, &eeprom, sizeof(eeprom));
+ close(fd);
+ if (rbytes < sizeof(eeprom)) {
+ dev_err(dev, "Failed to read %s\n", file);
+ return rbytes < 0 ? rbytes : -EIO;
+ }
+
+ dev_dbg(dev, "ART version: %x.%x\n",
+ eeprom.eeprom_version, eeprom.template_version);
+ dev_dbg(dev, "mac: %02x:%02x:%02x:%02x:%02x:%02x\n",
+ eeprom.mac_addr[0],
+ eeprom.mac_addr[1],
+ eeprom.mac_addr[2],
+ eeprom.mac_addr[3],
+ eeprom.mac_addr[4],
+ eeprom.mac_addr[5]);
+
+ if (!is_valid_ether_addr(&eeprom.mac_addr[0])) {
+ dev_err(dev, "bad MAC addr\n");
+ return -EILSEQ;
+ }
+
+ return art_set_mac(dev, &eeprom);
+}
+
+static int art_probe(struct device_d *dev)
+{
+ char *path;
+ int ret;
+
+ dev_dbg(dev, "found ART partition\n");
+
+ ret = of_find_path(dev->device_node, "device-path", &path, 0);
+ if (ret) {
+ dev_err(dev, "can't find path\n");
+ return ret;
+ }
+
+ return art_read_mac(dev, path);
+}
+
+static struct of_device_id art_dt_ids[] = {
+ {
+ .compatible = "qca,art",
+ }, {
+ /* sentinel */
+ }
+};
+
+static struct driver_d art_driver = {
+ .name = "qca-art",
+ .probe = art_probe,
+ .of_compatible = art_dt_ids,
+};
+
+static int art_of_driver_init(void)
+{
+ platform_driver_register(&art_driver);
+
+ return 0;
+}
+late_initcall(art_of_driver_init);
--
2.17.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next reply other threads:[~2018-06-07 19:56 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-07 19:55 Oleksij Rempel [this message]
2018-06-07 19:55 ` [PATCH v2 2/3] MIPS: dts: tl_wdr4300: add " Oleksij Rempel
2018-06-07 19:55 ` [PATCH v2 3/3] MIPS: dts: dpt-module: " Oleksij Rempel
2018-06-08 7:08 ` [PATCH v2 1/3] MIPS: ath79: provide driver for " Sascha Hauer
2018-06-08 7:23 ` Oleksij Rempel
2018-06-14 6:06 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180607195552.15246-1-o.rempel@pengutronix.de \
--to=o.rempel@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=linux@rempel-privat.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox