[PATCH 0/9] small nit-picks for the i.MX boards documentation

[PATCH 0/9] small nit-picks for the i.MX boards documentation

[Roland Hieber]

Roland Hieber (9):
  doc: boards: imx: order table of contents alphabetically
  doc: boards: Amazon Kindle 4/5: apply some more formatting
  doc: boards: Amazon Kindle 3: apply more formatting
  doc: boards: element14 WaRP7: fix header level and nested list
  doc: boards: Garz+Fricke Vincell: fix header level, capitalization and
    punctuation
  doc: boards: Ka-Ro TX6: use official spelling of Ka-Ro
  doc: boards: Phytec phyCORE-i.MX31: fix formatting, style
  doc: boards: Synertronixx SCB9328: use official uppercase spelling
  doc: boards: Wandboard: fix formatting and punctuation

 ...amazon-kindle3.rst => amazon-kindle-3.rst} | 12 ++++--
 ...-kindle-mx50.rst => amazon-kindle-4-5.rst} | 39 ++++++++++++-------
 ...lement14-WaRP7.rst => element14-warp7.rst} |  5 ++-
 ...Fricke-Cupid.rst => garz-fricke-cupid.rst} |  0
 ...ke-Vincell.rst => garz-fricke-vincell.rst} |  4 +-
 .../imx/{Karo-TX25.rst => karo-tx25.rst}      |  0
 .../boards/imx/{Karo-TX6.rst => karo-tx6.rst} |  4 +-
 ...D-i.MX27.rst => phytec-phycard-i.mx27.rst} |  0
 ...E-i.MX27.rst => phytec-phycore-i.mx27.rst} |  0
 ...E-i.MX31.rst => phytec-phycore-i.mx31.rst} |  8 ++--
 ...E-i.MX35.rst => phytec-phycore-i.mx35.rst} |  0
 .../boards/imx/synertronixx_scb9328.rst       |  2 +-
 .../imx/{Wandboard.rst => wandboard.rst}      | 11 +++---
 13 files changed, 51 insertions(+), 34 deletions(-)
 rename Documentation/boards/imx/{amazon-kindle3.rst => amazon-kindle-3.rst} (78%)
 rename Documentation/boards/imx/{amazon-kindle-mx50.rst => amazon-kindle-4-5.rst} (73%)
 rename Documentation/boards/imx/{Element14-WaRP7.rst => element14-warp7.rst} (95%)
 rename Documentation/boards/imx/{Garz-Fricke-Cupid.rst => garz-fricke-cupid.rst} (100%)
 rename Documentation/boards/imx/{Garz-Fricke-Vincell.rst => garz-fricke-vincell.rst} (90%)
 rename Documentation/boards/imx/{Karo-TX25.rst => karo-tx25.rst} (100%)
 rename Documentation/boards/imx/{Karo-TX6.rst => karo-tx6.rst} (93%)
 rename Documentation/boards/imx/{Phytec-phyCARD-i.MX27.rst => phytec-phycard-i.mx27.rst} (100%)
 rename Documentation/boards/imx/{Phytec-phyCORE-i.MX27.rst => phytec-phycore-i.mx27.rst} (100%)
 rename Documentation/boards/imx/{Phytec-phyCORE-i.MX31.rst => phytec-phycore-i.mx31.rst} (81%)
 rename Documentation/boards/imx/{Phytec-phyCORE-i.MX35.rst => phytec-phycore-i.mx35.rst} (100%)
 rename Documentation/boards/imx/{Wandboard.rst => wandboard.rst} (67%)

-- 
2.17.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 1/9] doc: boards: imx: order table of contents alphabetically

[Roland Hieber]

Upper and lower case are significant when sorting file names. Stay with
lower case file names for now, and make sure the file name order is the
same as the order of the page titles in the table of contents.

Signed-off-by: Roland Hieber <rohieb@rohieb.name>
---
 .../boards/imx/{amazon-kindle3.rst => amazon-kindle-3.rst}        | 0
 .../boards/imx/{amazon-kindle-mx50.rst => amazon-kindle-4-5.rst}  | 0
 .../boards/imx/{Element14-WaRP7.rst => element14-warp7.rst}       | 0
 .../boards/imx/{Garz-Fricke-Cupid.rst => garz-fricke-cupid.rst}   | 0
 .../imx/{Garz-Fricke-Vincell.rst => garz-fricke-vincell.rst}      | 0
 Documentation/boards/imx/{Karo-TX25.rst => karo-tx25.rst}         | 0
 Documentation/boards/imx/{Karo-TX6.rst => karo-tx6.rst}           | 0
 .../imx/{Phytec-phyCARD-i.MX27.rst => phytec-phycard-i.mx27.rst}  | 0
 .../imx/{Phytec-phyCORE-i.MX27.rst => phytec-phycore-i.mx27.rst}  | 0
 .../imx/{Phytec-phyCORE-i.MX31.rst => phytec-phycore-i.mx31.rst}  | 0
 .../imx/{Phytec-phyCORE-i.MX35.rst => phytec-phycore-i.mx35.rst}  | 0
 Documentation/boards/imx/{Wandboard.rst => wandboard.rst}         | 0
 12 files changed, 0 insertions(+), 0 deletions(-)
 rename Documentation/boards/imx/{amazon-kindle3.rst => amazon-kindle-3.rst} (100%)
 rename Documentation/boards/imx/{amazon-kindle-mx50.rst => amazon-kindle-4-5.rst} (100%)
 rename Documentation/boards/imx/{Element14-WaRP7.rst => element14-warp7.rst} (100%)
 rename Documentation/boards/imx/{Garz-Fricke-Cupid.rst => garz-fricke-cupid.rst} (100%)
 rename Documentation/boards/imx/{Garz-Fricke-Vincell.rst => garz-fricke-vincell.rst} (100%)
 rename Documentation/boards/imx/{Karo-TX25.rst => karo-tx25.rst} (100%)
 rename Documentation/boards/imx/{Karo-TX6.rst => karo-tx6.rst} (100%)
 rename Documentation/boards/imx/{Phytec-phyCARD-i.MX27.rst => phytec-phycard-i.mx27.rst} (100%)
 rename Documentation/boards/imx/{Phytec-phyCORE-i.MX27.rst => phytec-phycore-i.mx27.rst} (100%)
 rename Documentation/boards/imx/{Phytec-phyCORE-i.MX31.rst => phytec-phycore-i.mx31.rst} (100%)
 rename Documentation/boards/imx/{Phytec-phyCORE-i.MX35.rst => phytec-phycore-i.mx35.rst} (100%)
 rename Documentation/boards/imx/{Wandboard.rst => wandboard.rst} (100%)

diff --git a/Documentation/boards/imx/amazon-kindle3.rst b/Documentation/boards/imx/amazon-kindle-3.rst
similarity index 100%
rename from Documentation/boards/imx/amazon-kindle3.rst
rename to Documentation/boards/imx/amazon-kindle-3.rst
diff --git a/Documentation/boards/imx/amazon-kindle-mx50.rst b/Documentation/boards/imx/amazon-kindle-4-5.rst
similarity index 100%
rename from Documentation/boards/imx/amazon-kindle-mx50.rst
rename to Documentation/boards/imx/amazon-kindle-4-5.rst
diff --git a/Documentation/boards/imx/Element14-WaRP7.rst b/Documentation/boards/imx/element14-warp7.rst
similarity index 100%
rename from Documentation/boards/imx/Element14-WaRP7.rst
rename to Documentation/boards/imx/element14-warp7.rst
diff --git a/Documentation/boards/imx/Garz-Fricke-Cupid.rst b/Documentation/boards/imx/garz-fricke-cupid.rst
similarity index 100%
rename from Documentation/boards/imx/Garz-Fricke-Cupid.rst
rename to Documentation/boards/imx/garz-fricke-cupid.rst
diff --git a/Documentation/boards/imx/Garz-Fricke-Vincell.rst b/Documentation/boards/imx/garz-fricke-vincell.rst
similarity index 100%
rename from Documentation/boards/imx/Garz-Fricke-Vincell.rst
rename to Documentation/boards/imx/garz-fricke-vincell.rst
diff --git a/Documentation/boards/imx/Karo-TX25.rst b/Documentation/boards/imx/karo-tx25.rst
similarity index 100%
rename from Documentation/boards/imx/Karo-TX25.rst
rename to Documentation/boards/imx/karo-tx25.rst
diff --git a/Documentation/boards/imx/Karo-TX6.rst b/Documentation/boards/imx/karo-tx6.rst
similarity index 100%
rename from Documentation/boards/imx/Karo-TX6.rst
rename to Documentation/boards/imx/karo-tx6.rst
diff --git a/Documentation/boards/imx/Phytec-phyCARD-i.MX27.rst b/Documentation/boards/imx/phytec-phycard-i.mx27.rst
similarity index 100%
rename from Documentation/boards/imx/Phytec-phyCARD-i.MX27.rst
rename to Documentation/boards/imx/phytec-phycard-i.mx27.rst
diff --git a/Documentation/boards/imx/Phytec-phyCORE-i.MX27.rst b/Documentation/boards/imx/phytec-phycore-i.mx27.rst
similarity index 100%
rename from Documentation/boards/imx/Phytec-phyCORE-i.MX27.rst
rename to Documentation/boards/imx/phytec-phycore-i.mx27.rst
diff --git a/Documentation/boards/imx/Phytec-phyCORE-i.MX31.rst b/Documentation/boards/imx/phytec-phycore-i.mx31.rst
similarity index 100%
rename from Documentation/boards/imx/Phytec-phyCORE-i.MX31.rst
rename to Documentation/boards/imx/phytec-phycore-i.mx31.rst
diff --git a/Documentation/boards/imx/Phytec-phyCORE-i.MX35.rst b/Documentation/boards/imx/phytec-phycore-i.mx35.rst
similarity index 100%
rename from Documentation/boards/imx/Phytec-phyCORE-i.MX35.rst
rename to Documentation/boards/imx/phytec-phycore-i.mx35.rst
diff --git a/Documentation/boards/imx/Wandboard.rst b/Documentation/boards/imx/wandboard.rst
similarity index 100%
rename from Documentation/boards/imx/Wandboard.rst
rename to Documentation/boards/imx/wandboard.rst
-- 
2.17.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 2/9] doc: boards: Amazon Kindle 4/5: apply some more formatting

[Roland Hieber]

Signed-off-by: Roland Hieber <rohieb@rohieb.name>
---
 .../boards/imx/amazon-kindle-4-5.rst          | 39 ++++++++++++-------
 1 file changed, 25 insertions(+), 14 deletions(-)

diff --git a/Documentation/boards/imx/amazon-kindle-4-5.rst b/Documentation/boards/imx/amazon-kindle-4-5.rst
index 1e71cd26ba..bc6bf2609b 100644
--- a/Documentation/boards/imx/amazon-kindle-4-5.rst
+++ b/Documentation/boards/imx/amazon-kindle-4-5.rst
@@ -18,24 +18,32 @@ are shipped with a vendor modified u-boot imximage based on u-boot v2009.08.
 To upload and run a new bootloader the older devices can be put into
 USB-downloader mode by the SOC microcode when a specific key is pressed during
 startup:
+
 * the fiveway down button on the model D01100
 * the home button on model D01200
+
 A new USB device "NS Blank CODEX" should appear, barebox may be uploaded using
-$ scripts/imx/imx-usb-loader barebox-kindle-d01100.img
-$ scripts/imx/imx-usb-loader barebox-kindle-d01200.img
+
+::
+
+        $ scripts/imx/imx-usb-loader barebox-kindle-d01100.img
+        $ scripts/imx/imx-usb-loader barebox-kindle-d01200.img
+
 Hint: keep the select button pressed down to get the barebox USB console.
 
 Barebox may be used as drop-in replacement for the shipped bootloader, when
 the imximg fits into 258048 bytes. When installing the barebox imximg on
-the eMMC take care not to overwrite the vendor supplied serial numbers stored
-on the eMMC.
-e.g. for the D01100 just write the imx-header and the application section:
-loady -t usbserial
-memcpy -b -s barebox-kindle-d01100.img -d /dev/disk0.boot0.imx_header 1024 0 2048
-memcpy -b -s barebox-kindle-d01100.img -d /dev/disk0.boot0.self 4096 0 253952
+the eMMC, take care not to overwrite the vendor supplied serial numbers stored
+on the eMMC,
+e.g. for the D01100 just write the imx-header and the application section::
+
+        loady -t usbserial
+        memcpy -b -s barebox-kindle-d01100.img -d /dev/disk0.boot0.imx_header 1024 0 2048
+        memcpy -b -s barebox-kindle-d01100.img -d /dev/disk0.boot0.self 4096 0 253952
 
 Note: a USB serial ACM console will be launched by a barebox init script
 when
+
 * the cursor select key is pressed during startup of model D01100
 * the home button is pressed within a second after startup of model D01200.
   If you press the home button during startup, you will enter USB boot mode.
@@ -47,12 +55,15 @@ power consumption to a few milliamps of battery power, after some minutes
 the power consumption is further reduced to about 550 microamps. Switching
 on iomux pullups may significantly reduce your standby-time.
 
-Hints to reduce the build image size.
+Hints to reduce the build image size
+------------------------------------
+
 Note that a drop-in replacement barebox imximage must not exceed 258048 bytes
 since the space behind it is in use. Hence, don't build in drivers and FS
-that are not required, e.g.:
-  NET, DISK_AHCI, DISK_INTF_PLATFORM_IDE, DISK_ATA, VIDEO, PWM, LED,
-  USB_STORAGE, USB_ULPI, NAND, MTD_UBI, FS_UBIFS, MFD_MC34704, MFD_MC9SDZ60,
-  MFD_STMPE, EEPROM_AT25, EEPROM_AT24, KEYBOARD_GPIO, PARTITION_DISK_EFI
+that are not required, e.g.
+``NET, DISK_AHCI, DISK_INTF_PLATFORM_IDE, DISK_ATA, VIDEO, PWM, LED,
+USB_STORAGE, USB_ULPI, NAND, MTD_UBI, FS_UBIFS, MFD_MC34704, MFD_MC9SDZ60,
+MFD_STMPE, EEPROM_AT25, EEPROM_AT24, KEYBOARD_GPIO, PARTITION_DISK_EFI``
+
 Also unselect support for other boards to get rid of their dependencies.
-Further select IMAGE_COMPRESSION_XZKERN
+Further select ``IMAGE_COMPRESSION_XZKERN``.
-- 
2.17.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 3/9] doc: boards: Amazon Kindle 3: apply more formatting

[Roland Hieber]

Signed-off-by: Roland Hieber <rohieb@rohieb.name>
---
 Documentation/boards/imx/amazon-kindle-3.rst | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/Documentation/boards/imx/amazon-kindle-3.rst b/Documentation/boards/imx/amazon-kindle-3.rst
index 50592f2cb9..dffb7efb2d 100644
--- a/Documentation/boards/imx/amazon-kindle-3.rst
+++ b/Documentation/boards/imx/amazon-kindle-3.rst
@@ -14,7 +14,10 @@ vendor modified u-boot imximage.
 To upload and run a new bootloader the device can be put into USB-downloader
 mode by the SOC microcode when Vol+ is pressed during startup. A new USB
 device "SE Blank RINGO" should appear, barebox may be uploaded using
-$ scripts/imx/imx-usb-loader barebox.imximg
+
+::
+
+        $ scripts/imx/imx-usb-loader barebox.imximg
 
 Note: a USB serial ACM console will be launched by a barebox init script
 when the cursor select key is pressed during startup (e.g. before running
@@ -23,6 +26,7 @@ imx-usb-loader)
 Barebox may be used as drop-in replacement for the shipped bootloader.
 When installing the barebox imximg on the eMMC take care not to overwrite
 the partition table and vendor supplied serial numbers stored on the eMMC.
-e.g. just write the imx-header and the application section:
-memcpy -b -s barebox.imximg -d /dev/disk0.imx_header 1024 0 1024
-memcpy -b -s barebox.imximg -d /dev/disk0.self 4096 0 195584
+e.g. just write the imx-header and the application section::
+
+        memcpy -b -s barebox.imximg -d /dev/disk0.imx_header 1024 0 1024
+        memcpy -b -s barebox.imximg -d /dev/disk0.self 4096 0 195584
-- 
2.17.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 4/9] doc: boards: element14 WaRP7: fix header level and nested list

[Roland Hieber]

Signed-off-by: Roland Hieber <rohieb@rohieb.name>
---
 Documentation/boards/imx/element14-warp7.rst | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/Documentation/boards/imx/element14-warp7.rst b/Documentation/boards/imx/element14-warp7.rst
index df14f84dc4..830a2fb55b 100644
--- a/Documentation/boards/imx/element14-warp7.rst
+++ b/Documentation/boards/imx/element14-warp7.rst
@@ -4,15 +4,16 @@ element14 WaRP7
 This CPU card is based on an NXP i.MX7S SoC.
 
 Supported hardware
-==================
+------------------
 
 - NXP PMIC PFUZE3000
 - Kingston 08EMCP04-EL3AV100 eMCP (eMMC and LPDDR3 memory in one package)
+
   - 8 GiB eMMC Triple-Level cell NAND flash, eMMC standard 5.0 (HS400)
   - 512 MiB LPDDR3 SDRAM starting at address 0x80000000
 
 Bootstrapping barebox
-=====================
+---------------------
 
 The device boots in internal boot mode from eMMC and is shipped with a
 vendor modified u-boot imximage.
-- 
2.17.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 5/9] doc: boards: Garz+Fricke Vincell: fix header level, capitalization and punctuation

[Roland Hieber]

Signed-off-by: Roland Hieber <rohieb@rohieb.name>
---
 Documentation/boards/imx/garz-fricke-vincell.rst | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/boards/imx/garz-fricke-vincell.rst b/Documentation/boards/imx/garz-fricke-vincell.rst
index 58ab0ab42f..09d87d67c3 100644
--- a/Documentation/boards/imx/garz-fricke-vincell.rst
+++ b/Documentation/boards/imx/garz-fricke-vincell.rst
@@ -7,11 +7,11 @@ This CPU card is based on a Freescale i.MX53 CPU. The card is shipped with:
   * 512MiB synchronous dynamic RAM
   * microSD slot
 
-see http://www.garz-fricke.com/en/products/embedded-systems/single-board-computer/ia-0086r/ for more information
+See http://www.garz-fricke.com/en/products/embedded-systems/single-board-computer/ia-0086r/ for more information.
 
 
 Bootstrapping barebox
-=====================
+---------------------
 
 The Vincell is shipped with the RedBoot bootloader. To replace RedBoot with
 barebox, you first need to connect a serial console to the device.
-- 
2.17.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 6/9] doc: boards: Ka-Ro TX6: use official spelling of Ka-Ro

[Roland Hieber]

Now both Ka-Ro entries in the table of contents look similar.

Signed-off-by: Roland Hieber <rohieb@rohieb.name>
---
 Documentation/boards/imx/karo-tx6.rst | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/boards/imx/karo-tx6.rst b/Documentation/boards/imx/karo-tx6.rst
index 8dd26b5964..acd6d68eeb 100644
--- a/Documentation/boards/imx/karo-tx6.rst
+++ b/Documentation/boards/imx/karo-tx6.rst
@@ -1,5 +1,5 @@
-KaRo TX6x
-=========
+Ka-Ro TX6x
+==========
 
 This CPU cards are based on a Freescale i.MX6 SoC.
 There are currently six variants of this module, that are distinguished
-- 
2.17.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 7/9] doc: boards: Phytec phyCORE-i.MX31: fix formatting, style

[Roland Hieber]

Signed-off-by: Roland Hieber <rohieb@rohieb.name>
---
 Documentation/boards/imx/phytec-phycore-i.mx31.rst | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/Documentation/boards/imx/phytec-phycore-i.mx31.rst b/Documentation/boards/imx/phytec-phycore-i.mx31.rst
index 6c05bcdfdc..d9a981b998 100644
--- a/Documentation/boards/imx/phytec-phycore-i.mx31.rst
+++ b/Documentation/boards/imx/phytec-phycore-i.mx31.rst
@@ -23,8 +23,8 @@ Supported baseboards
 Supported baseboards are:
   * Silica / Phytec PCM-970 via phyMAP-i.MX31, PMA-001
 
-How to get barebox for 'Phytec's phyCORE-i.MX31'
-------------------------------------------------
+How to get barebox for Phytec's phyCORE-i.MX31
+----------------------------------------------
 
 Using the default configuration::
 
@@ -34,8 +34,8 @@ Build the binary image::
 
   make ARCH=arm CROSS_COMPILE=armv5compiler
 
-**NOTE:** replace ''armv5compiler'' with your ARM v5 cross compiler,
- e.g.: ''arm-1136jfs-linux-gnueabi-''
+.. note:: replace ``armv5compiler`` with your ARM v5 cross compiler prefix,
+ e.g.: ``arm-1136jfs-linux-gnueabi-``
 
 The resulting binary image to be flashed will be ``barebox.bin``, whereas
 the file named just ``barebox`` is an ELF executable for ARM.
-- 
2.17.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 8/9] doc: boards: Synertronixx SCB9328: use official uppercase spelling

[Roland Hieber]

See homepage link.

Signed-off-by: Roland Hieber <rohieb@rohieb.name>
---
 Documentation/boards/imx/synertronixx_scb9328.rst | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/boards/imx/synertronixx_scb9328.rst b/Documentation/boards/imx/synertronixx_scb9328.rst
index 0e59046a24..a104d1c2f7 100644
--- a/Documentation/boards/imx/synertronixx_scb9328.rst
+++ b/Documentation/boards/imx/synertronixx_scb9328.rst
@@ -1,4 +1,4 @@
-Synertronixx scb9328
+Synertronixx SCB9328
 ====================
 
 See http://www.synertronixx.de/produkte/scb9328/scb9328.htm
-- 
2.17.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 9/9] doc: boards: Wandboard: fix formatting and punctuation

[Roland Hieber]

Signed-off-by: Roland Hieber <rohieb@rohieb.name>
---
 Documentation/boards/imx/wandboard.rst | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/Documentation/boards/imx/wandboard.rst b/Documentation/boards/imx/wandboard.rst
index 574318a009..8283b47260 100644
--- a/Documentation/boards/imx/wandboard.rst
+++ b/Documentation/boards/imx/wandboard.rst
@@ -8,14 +8,15 @@ the Wandboard Dual (i.MX6DL, 1GiB DDR3) and Wandboard Quad (i.MX6Q, 2GiB DDR3).
 The device boots from the SD card slot on the System-on-Module board, it
 will not boot from the slot on the carrier board.
 
-To boot barebox on any wandboard, build imx_v7_defconfig
-and copy the barebox imx-image to the i.MX boot location of a SD card, e.g.
-dd bs=1024 skip=1 seek=1 if=images/barebox-imx6-wandboard.img of=/dev/mmcblk0
+To boot barebox on any wandboard, build ``imx_v7_defconfig``
+and copy the barebox imx-image to the i.MX boot location of a SD card, e.g.::
+
+        dd bs=1024 skip=1 seek=1 if=images/barebox-imx6-wandboard.img of=/dev/mmcblk0
 
 Only one image exists, supporting all three Wandboard variants, barebox will
 detect the Wandboard variant depending on the SoC variant.
-This image is only usable for SD-boot. It will not boot via imx-usb-loader.
+This image is only usable for SD boot. It will not boot via imx-usb-loader.
 
 Connect to the serial port using a null-modem cable to get console access.
 
-For further documentation, including board schematics see http://wandboard.org/
+For further documentation, including board schematics, see http://wandboard.org/.
-- 
2.17.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

Re: [PATCH 0/9] small nit-picks for the i.MX boards documentation

[Sascha Hauer]

On Tue, Jun 12, 2018 at 12:02:26AM +0200, Roland Hieber wrote:
> Roland Hieber (9):
>   doc: boards: imx: order table of contents alphabetically
>   doc: boards: Amazon Kindle 4/5: apply some more formatting
>   doc: boards: Amazon Kindle 3: apply more formatting
>   doc: boards: element14 WaRP7: fix header level and nested list
>   doc: boards: Garz+Fricke Vincell: fix header level, capitalization and
>     punctuation
>   doc: boards: Ka-Ro TX6: use official spelling of Ka-Ro
>   doc: boards: Phytec phyCORE-i.MX31: fix formatting, style
>   doc: boards: Synertronixx SCB9328: use official uppercase spelling
>   doc: boards: Wandboard: fix formatting and punctuation

Applied, thanks

Sascha

> 
>  ...amazon-kindle3.rst => amazon-kindle-3.rst} | 12 ++++--
>  ...-kindle-mx50.rst => amazon-kindle-4-5.rst} | 39 ++++++++++++-------
>  ...lement14-WaRP7.rst => element14-warp7.rst} |  5 ++-
>  ...Fricke-Cupid.rst => garz-fricke-cupid.rst} |  0
>  ...ke-Vincell.rst => garz-fricke-vincell.rst} |  4 +-
>  .../imx/{Karo-TX25.rst => karo-tx25.rst}      |  0
>  .../boards/imx/{Karo-TX6.rst => karo-tx6.rst} |  4 +-
>  ...D-i.MX27.rst => phytec-phycard-i.mx27.rst} |  0
>  ...E-i.MX27.rst => phytec-phycore-i.mx27.rst} |  0
>  ...E-i.MX31.rst => phytec-phycore-i.mx31.rst} |  8 ++--
>  ...E-i.MX35.rst => phytec-phycore-i.mx35.rst} |  0
>  .../boards/imx/synertronixx_scb9328.rst       |  2 +-
>  .../imx/{Wandboard.rst => wandboard.rst}      | 11 +++---
>  13 files changed, 51 insertions(+), 34 deletions(-)
>  rename Documentation/boards/imx/{amazon-kindle3.rst => amazon-kindle-3.rst} (78%)
>  rename Documentation/boards/imx/{amazon-kindle-mx50.rst => amazon-kindle-4-5.rst} (73%)
>  rename Documentation/boards/imx/{Element14-WaRP7.rst => element14-warp7.rst} (95%)
>  rename Documentation/boards/imx/{Garz-Fricke-Cupid.rst => garz-fricke-cupid.rst} (100%)
>  rename Documentation/boards/imx/{Garz-Fricke-Vincell.rst => garz-fricke-vincell.rst} (90%)
>  rename Documentation/boards/imx/{Karo-TX25.rst => karo-tx25.rst} (100%)
>  rename Documentation/boards/imx/{Karo-TX6.rst => karo-tx6.rst} (93%)
>  rename Documentation/boards/imx/{Phytec-phyCARD-i.MX27.rst => phytec-phycard-i.mx27.rst} (100%)
>  rename Documentation/boards/imx/{Phytec-phyCORE-i.MX27.rst => phytec-phycore-i.mx27.rst} (100%)
>  rename Documentation/boards/imx/{Phytec-phyCORE-i.MX31.rst => phytec-phycore-i.mx31.rst} (81%)
>  rename Documentation/boards/imx/{Phytec-phyCORE-i.MX35.rst => phytec-phycore-i.mx35.rst} (100%)
>  rename Documentation/boards/imx/{Wandboard.rst => wandboard.rst} (67%)
> 
> -- 
> 2.17.1
> 
> 
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox