From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: barebox@lists.infradead.org
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Subject: [PATCH v4 32/54] common/clock: Move delay and timeout functions to lib/
Date: Mon, 11 Jun 2018 18:53:04 -0700 [thread overview]
Message-ID: <20180612015326.26192-33-andrew.smirnov@gmail.com> (raw)
In-Reply-To: <20180612015326.26192-1-andrew.smirnov@gmail.com>
Move delay and timeout functions to lib/ in order to share them with
PBL. Currently only the most trivial implementation of get_time_ns()
usefull to implement never-expiring timeouts is provided. More work is
needed to allow board specific overrides.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
common/clock.c | 52 ------------------------------------
lib/Makefile | 1 +
lib/clock.c | 72 ++++++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 73 insertions(+), 52 deletions(-)
create mode 100644 lib/clock.c
diff --git a/common/clock.c b/common/clock.c
index f98176dd5..c356a88b5 100644
--- a/common/clock.c
+++ b/common/clock.c
@@ -25,7 +25,6 @@
#include <init.h>
#include <asm-generic/div64.h>
#include <clock.h>
-#include <poller.h>
static uint64_t time_ns;
@@ -170,57 +169,6 @@ uint32_t clocksource_hz2mult(uint32_t hz, uint32_t shift_constant)
return (uint32_t)tmp;
}
-int is_timeout_non_interruptible(uint64_t start_ns, uint64_t time_offset_ns)
-{
- if ((int64_t)(start_ns + time_offset_ns - get_time_ns()) < 0)
- return 1;
- else
- return 0;
-}
-EXPORT_SYMBOL(is_timeout_non_interruptible);
-
-int is_timeout(uint64_t start_ns, uint64_t time_offset_ns)
-{
- if (time_offset_ns >= 100 * USECOND)
- poller_call();
-
- return is_timeout_non_interruptible(start_ns, time_offset_ns);
-}
-EXPORT_SYMBOL(is_timeout);
-
-void ndelay(unsigned long nsecs)
-{
- uint64_t start = get_time_ns();
-
- while(!is_timeout_non_interruptible(start, nsecs));
-}
-EXPORT_SYMBOL(ndelay);
-
-void udelay(unsigned long usecs)
-{
- uint64_t start = get_time_ns();
-
- while(!is_timeout(start, usecs * USECOND));
-}
-EXPORT_SYMBOL(udelay);
-
-void mdelay(unsigned long msecs)
-{
- uint64_t start = get_time_ns();
-
- while(!is_timeout(start, msecs * MSECOND));
-}
-EXPORT_SYMBOL(mdelay);
-
-void mdelay_non_interruptible(unsigned long msecs)
-{
- uint64_t start = get_time_ns();
-
- while (!is_timeout_non_interruptible(start, msecs * MSECOND))
- ;
-}
-EXPORT_SYMBOL(mdelay_non_interruptible);
-
int init_clock(struct clocksource *cs)
{
if (current_clock && cs->priority <= current_clock->priority)
diff --git a/lib/Makefile b/lib/Makefile
index a7498288a..09c250a1c 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -65,3 +65,4 @@ obj-y += int_sqrt.o
obj-y += parseopt.o
obj-y += clz_ctz.o
obj-$(CONFIG_CRC_CCITT) += crc-ccitt.o
+obj-pbl-y += clock.o
\ No newline at end of file
diff --git a/lib/clock.c b/lib/clock.c
new file mode 100644
index 000000000..b7cc49fa6
--- /dev/null
+++ b/lib/clock.c
@@ -0,0 +1,72 @@
+#include <common.h>
+#include <asm-generic/div64.h>
+#include <poller.h>
+
+int is_timeout_non_interruptible(uint64_t start_ns, uint64_t time_offset_ns)
+{
+ if ((int64_t)(start_ns + time_offset_ns - get_time_ns()) < 0)
+ return 1;
+ else
+ return 0;
+}
+EXPORT_SYMBOL(is_timeout_non_interruptible);
+
+#if defined(__PBL__)
+/*
+ * Poller infrastructure is not available in PBL, so we just define
+ * is_timeout to be a synonym for is_timeout_non_interruptible
+ */
+int is_timeout(uint64_t start_ns, uint64_t time_offset_ns)
+ __alias(is_timeout_non_interruptible);
+#else
+#include <poller.h>
+
+int is_timeout(uint64_t start_ns, uint64_t time_offset_ns)
+{
+
+ if (time_offset_ns >= 100 * USECOND)
+ poller_call();
+
+ return is_timeout_non_interruptible(start_ns, time_offset_ns);
+}
+#endif
+EXPORT_SYMBOL(is_timeout);
+
+void ndelay(unsigned long nsecs)
+{
+ uint64_t start = get_time_ns();
+
+ while(!is_timeout_non_interruptible(start, nsecs));
+}
+EXPORT_SYMBOL(ndelay);
+
+void udelay(unsigned long usecs)
+{
+ uint64_t start = get_time_ns();
+
+ while(!is_timeout(start, usecs * USECOND));
+}
+EXPORT_SYMBOL(udelay);
+
+void mdelay(unsigned long msecs)
+{
+ uint64_t start = get_time_ns();
+
+ while(!is_timeout(start, msecs * MSECOND));
+}
+EXPORT_SYMBOL(mdelay);
+
+void mdelay_non_interruptible(unsigned long msecs)
+{
+ uint64_t start = get_time_ns();
+
+ while (!is_timeout_non_interruptible(start, msecs * MSECOND))
+ ;
+}
+EXPORT_SYMBOL(mdelay_non_interruptible);
+
+__weak uint64_t get_time_ns(void)
+{
+ return 0;
+}
+EXPORT_SYMBOL(get_time_ns);
\ No newline at end of file
--
2.17.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2018-06-12 1:55 UTC|newest]
Thread overview: 59+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-12 1:52 [PATCH v4 00/54] ARM: i.MX8MQ and EVK support Andrey Smirnov
2018-06-12 1:52 ` [PATCH v4 01/54] ARM: i.MX: xload: Fix compiler warning Andrey Smirnov
2018-06-12 1:52 ` [PATCH v4 02/54] ARM: i.MX: compile arm32 specific errata only for CPU32 Andrey Smirnov
2018-06-12 1:52 ` [PATCH v4 03/54] ARM: Add i.MX8 support Andrey Smirnov
2018-06-12 1:52 ` [PATCH v4 04/54] aarch64: Add i.MX8 debug UART support Andrey Smirnov
2018-06-12 1:52 ` [PATCH v4 05/54] Include our own include/dt-bindings Andrey Smirnov
2018-06-12 1:52 ` [PATCH v4 06/54] mci: imx-esdhc: use dma mapping functions Andrey Smirnov
2018-06-12 1:52 ` [PATCH v4 07/54] net: fec_imx: remove unnecessary DMA sync ops Andrey Smirnov
2018-06-12 1:52 ` [PATCH v4 08/54] net: fec_imx: Use dma mapping functions Andrey Smirnov
2018-06-12 1:52 ` [PATCH v4 09/54] net: fec_imx: Make use of IS_ALIGNED Andrey Smirnov
2018-06-12 1:52 ` [PATCH v4 10/54] clock: Add i.MX8MQ clock driver Andrey Smirnov
2018-06-12 1:52 ` [PATCH v4 11/54] serial: i.MX: Add i.MX8 support Andrey Smirnov
2018-06-12 1:52 ` [PATCH v4 12/54] mmc: i.MX esdhc: " Andrey Smirnov
2018-06-12 1:52 ` [PATCH v4 13/54] gpio: i.MX: Add i.MX8mq support Andrey Smirnov
2018-06-12 1:52 ` [PATCH v4 14/54] ARM: i.MX: ocotp: Add i.MX8MQ support Andrey Smirnov
2018-06-12 1:52 ` [PATCH v4 15/54] ARM: i.MX: Split shared CCM code into a separate file Andrey Smirnov
2018-06-12 1:52 ` [PATCH v4 16/54] ARM: i.MX: Add IOMUX pad constants for i.MX8 Andrey Smirnov
2018-06-12 1:52 ` [PATCH v4 17/54] ARM: i.MX: Add basic CCM " Andrey Smirnov
2018-06-12 1:52 ` [PATCH v4 18/54] ARM: Add constants and helpers for system counter interface Andrey Smirnov
2018-06-12 1:52 ` [PATCH v4 19/54] clocksource: armv8-timer: Convert explicit assembly into helpers Andrey Smirnov
2018-06-12 1:52 ` [PATCH v4 20/54] ARM: i.MX8: Initialize system counter Andrey Smirnov
2018-06-12 1:52 ` [PATCH v4 21/54] ARM: i.MX: boot: Fix address casting on 64-bit platforms Andrey Smirnov
2018-06-12 1:52 ` [PATCH v4 22/54] ARM: boot: Add trivial i.MX8 support Andrey Smirnov
2018-06-12 1:52 ` [PATCH v4 23/54] ARM: i.MX: xload-esdhc: Rework to make code be less i.MX6-specific Andrey Smirnov
2018-06-12 1:52 ` [PATCH v4 24/54] ARM: i.MX: xload-esdhc: Allow custom buffer address, device offset Andrey Smirnov
2018-06-12 1:52 ` [PATCH v4 25/54] ARM: i.MX: xload-esdhc: Add support for i.MX8 Andrey Smirnov
2018-06-12 1:52 ` [PATCH v4 26/54] pinctrl: i.MX: " Andrey Smirnov
2018-06-12 1:52 ` [PATCH v4 27/54] Documentation: imx: Change block size for 'dd' to 1024 Andrey Smirnov
2018-06-12 1:53 ` [PATCH v4 28/54] Documentation: i.MX: Add missing <soctype> Andrey Smirnov
2018-06-12 1:53 ` [PATCH v4 29/54] clocksource: armv8-timer: Make armv8_clocksource_read() static Andrey Smirnov
2018-06-12 1:53 ` [PATCH v4 30/54] clocksource: armv8-timer: Make use of postcore_platform_driver() Andrey Smirnov
2018-06-12 1:53 ` [PATCH v4 31/54] Port <linux/iopoll.h> from U-Boot Andrey Smirnov
2018-06-12 1:53 ` Andrey Smirnov [this message]
2018-06-12 1:53 ` [PATCH v4 33/54] clock: Use udelay() to implement mdelay() Andrey Smirnov
2018-06-12 1:53 ` [PATCH v4 34/54] ARM: i.MX8: Add DDRC PHY and DDR CTL base addresses Andrey Smirnov
2018-06-12 1:53 ` [PATCH v4 35/54] Kbuild: Add $(quote) Andrey Smirnov
2018-06-12 1:53 ` [PATCH v4 36/54] Add builtin firmware support Andrey Smirnov
2018-06-12 1:53 ` [PATCH v4 37/54] ARM: i.MX8: Add DDRC PHY support code Andrey Smirnov
2018-06-12 1:53 ` [PATCH v4 38/54] ARM: Specify HAVE_PBL_IMAGE for CPU_64 Andrey Smirnov
2018-06-12 1:53 ` [PATCH v4 39/54] ARM: lib64: Make string functions aware of MMU configuration Andrey Smirnov
2018-06-12 1:53 ` [PATCH v4 40/54] ARM: mmu: Make use of dsb() and isb() helpers Andrey Smirnov
2018-06-12 1:53 ` [PATCH v4 41/54] ARM: cache: Remove unused cache ops struct Andrey Smirnov
2018-06-12 1:53 ` [PATCH v4 42/54] ARM: no-mmu: Disable building for ARMv8 Andrey Smirnov
2018-06-12 1:53 ` [PATCH v4 43/54] ARM: interrupts64: Include ESR value in exception traceback Andrey Smirnov
2018-06-12 1:53 ` [PATCH v4 44/54] ARM: mmu64: Trivial code simplification Andrey Smirnov
2018-06-12 1:53 ` [PATCH v4 45/54] ARM: mmu64: Make use of create_table() Andrey Smirnov
2018-06-12 1:53 ` [PATCH v4 46/54] ARM: mmu64: Convert flags in arch_remap_range() Andrey Smirnov
2018-06-12 1:53 ` [PATCH v4 47/54] ARM: include: dma: Add missing no-MMU stubs Andrey Smirnov
2018-06-12 1:53 ` [PATCH v4 48/54] scripts: imx-image: Drop error return from write_dcd() Andrey Smirnov
2018-06-12 1:53 ` [PATCH v4 49/54] scripts: imx-image: Limit v2 header size to HEADER_LEN Andrey Smirnov
2018-06-12 1:53 ` [PATCH v4 50/54] scripts: imx-image: Use a loop to create multiple header copies Andrey Smirnov
2018-06-12 1:53 ` [PATCH v4 51/54] scripts: imx-image: Share the code to write barebox header Andrey Smirnov
2018-06-12 1:53 ` [PATCH v4 52/54] scripts: imx-image: Add i.MX8MQ support Andrey Smirnov
2018-06-12 1:53 ` [PATCH v4 53/54] ARM: i.MX8: Add i.MX8mq EVK support Andrey Smirnov
2018-06-12 2:58 ` Fabio Estevam
2018-06-12 14:52 ` Andrey Smirnov
2018-06-12 5:49 ` Holger Schurig
2018-06-12 14:53 ` Andrey Smirnov
2018-06-12 1:53 ` [PATCH v4 54/54] ARM: Introduce imx_v8_defconfig Andrey Smirnov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180612015326.26192-33-andrew.smirnov@gmail.com \
--to=andrew.smirnov@gmail.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox