From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: barebox@lists.infradead.org
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Subject: [PATCH v4 51/54] scripts: imx-image: Share the code to write barebox header
Date: Mon, 11 Jun 2018 18:53:23 -0700 [thread overview]
Message-ID: <20180612015326.26192-52-andrew.smirnov@gmail.com> (raw)
In-Reply-To: <20180612015326.26192-1-andrew.smirnov@gmail.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
scripts/imx/imx-image.c | 42 ++++++++++++++++++++---------------------
1 file changed, 20 insertions(+), 22 deletions(-)
diff --git a/scripts/imx/imx-image.c b/scripts/imx/imx-image.c
index bc1f821bd..4a08581fb 100644
--- a/scripts/imx/imx-image.c
+++ b/scripts/imx/imx-image.c
@@ -36,6 +36,7 @@
#include <include/filetype.h>
#define FLASH_HEADER_OFFSET 0x400
+#define ARM_HEAD_SIZE_INDEX (ARM_HEAD_SIZE_OFFSET / sizeof(uint32_t))
/*
* Conservative DCD element limit set to restriction v2 header size to
@@ -46,7 +47,6 @@
static uint32_t dcdtable[MAX_DCD];
static int curdcd;
-static int add_barebox_header;
static int create_usb_image;
static char *prgname;
@@ -207,18 +207,14 @@ static int add_srk(void *buf, int offset, uint32_t loadaddr, const char *srkfile
static int dcd_ptr_offset;
static uint32_t dcd_ptr_content;
-static int add_header_v1(struct config_data *data, void *buf)
+static size_t add_header_v1(struct config_data *data, void *buf)
{
struct imx_flash_header *hdr;
int dcdsize = curdcd * sizeof(uint32_t);
- uint32_t *psize = buf + ARM_HEAD_SIZE_OFFSET;
int offset = data->image_dcd_offset;
uint32_t loadaddr = data->image_load_addr;
uint32_t imagesize = data->load_size;
- if (add_barebox_header)
- memcpy(buf, bb_header, sizeof(bb_header));
-
buf += offset;
hdr = buf;
@@ -250,12 +246,9 @@ static int add_header_v1(struct config_data *data, void *buf)
imagesize += CSF_LEN;
}
- if (add_barebox_header)
- *psize = imagesize;
-
*(uint32_t *)buf = imagesize;
- return 0;
+ return imagesize;
}
static int write_mem_v1(uint32_t addr, uint32_t val, int width, int set_bits, int clear_bits)
@@ -283,18 +276,14 @@ static int write_mem_v1(uint32_t addr, uint32_t val, int width, int set_bits, in
* ============================================================================
*/
-static int add_header_v2(const struct config_data *data, void *buf)
+static size_t add_header_v2(const struct config_data *data, void *buf)
{
struct imx_flash_header_v2 *hdr;
int dcdsize = curdcd * sizeof(uint32_t);
- uint32_t *psize = buf + ARM_HEAD_SIZE_OFFSET;
int offset = data->image_dcd_offset;
uint32_t loadaddr = data->image_load_addr;
uint32_t imagesize = data->load_size;
- if (add_barebox_header)
- memcpy(buf, bb_header, sizeof(bb_header));
-
buf += offset;
hdr = buf;
@@ -320,9 +309,6 @@ static int add_header_v2(const struct config_data *data, void *buf)
hdr->boot_data.size += CSF_LEN;
}
- if (add_barebox_header)
- *psize = hdr->boot_data.size;
-
hdr->dcd_header.tag = TAG_DCD_HEADER;
hdr->dcd_header.length = htobe16(sizeof(uint32_t) + dcdsize);
hdr->dcd_header.version = DCD_VERSION;
@@ -331,7 +317,7 @@ static int add_header_v2(const struct config_data *data, void *buf)
memcpy(buf, dcdtable, dcdsize);
- return 0;
+ return imagesize;
}
static void usage(const char *prgname)
@@ -680,6 +666,8 @@ int main(int argc, char *argv[])
int now = 0;
int sign_image = 0;
int i, header_copies;
+ int add_barebox_header;
+ uint32_t barebox_image_size;
struct config_data data = {
.image_dcd_offset = 0xffffffff,
.write_mem = write_mem,
@@ -792,7 +780,7 @@ int main(int argc, char *argv[])
switch (data.header_version) {
case 1:
- add_header_v1(&data, buf);
+ barebox_image_size = add_header_v1(&data, buf);
if (data.srkfile) {
ret = add_srk(buf, data.image_dcd_offset, data.image_load_addr,
data.srkfile);
@@ -807,7 +795,7 @@ int main(int argc, char *argv[])
exit(1);
}
- add_header_v2(&data, buf);
+ barebox_image_size = add_header_v2(&data, buf);
break;
default:
fprintf(stderr, "Congratulations! You're welcome to implement header version %d\n",
@@ -815,6 +803,8 @@ int main(int argc, char *argv[])
exit(1);
}
+ bb_header[ARM_HEAD_SIZE_INDEX] = barebox_image_size;
+
infile = read_file(imagename, &insize);
if (!infile)
exit(1);
@@ -828,7 +818,15 @@ int main(int argc, char *argv[])
header_copies = (data.cpu_type == IMX_CPU_IMX35) ? 2 : 1;
for (i = 0; i < header_copies; i++) {
- ret = xwrite(outfd, buf, HEADER_LEN);
+ ret = xwrite(outfd, add_barebox_header ? bb_header : buf,
+ sizeof(bb_header));
+ if (ret < 0) {
+ perror("write");
+ exit(1);
+ }
+
+ ret = xwrite(outfd, buf + sizeof(bb_header),
+ HEADER_LEN - sizeof(bb_header));
if (ret < 0) {
perror("write");
exit(1);
--
2.17.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2018-06-12 1:56 UTC|newest]
Thread overview: 59+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-12 1:52 [PATCH v4 00/54] ARM: i.MX8MQ and EVK support Andrey Smirnov
2018-06-12 1:52 ` [PATCH v4 01/54] ARM: i.MX: xload: Fix compiler warning Andrey Smirnov
2018-06-12 1:52 ` [PATCH v4 02/54] ARM: i.MX: compile arm32 specific errata only for CPU32 Andrey Smirnov
2018-06-12 1:52 ` [PATCH v4 03/54] ARM: Add i.MX8 support Andrey Smirnov
2018-06-12 1:52 ` [PATCH v4 04/54] aarch64: Add i.MX8 debug UART support Andrey Smirnov
2018-06-12 1:52 ` [PATCH v4 05/54] Include our own include/dt-bindings Andrey Smirnov
2018-06-12 1:52 ` [PATCH v4 06/54] mci: imx-esdhc: use dma mapping functions Andrey Smirnov
2018-06-12 1:52 ` [PATCH v4 07/54] net: fec_imx: remove unnecessary DMA sync ops Andrey Smirnov
2018-06-12 1:52 ` [PATCH v4 08/54] net: fec_imx: Use dma mapping functions Andrey Smirnov
2018-06-12 1:52 ` [PATCH v4 09/54] net: fec_imx: Make use of IS_ALIGNED Andrey Smirnov
2018-06-12 1:52 ` [PATCH v4 10/54] clock: Add i.MX8MQ clock driver Andrey Smirnov
2018-06-12 1:52 ` [PATCH v4 11/54] serial: i.MX: Add i.MX8 support Andrey Smirnov
2018-06-12 1:52 ` [PATCH v4 12/54] mmc: i.MX esdhc: " Andrey Smirnov
2018-06-12 1:52 ` [PATCH v4 13/54] gpio: i.MX: Add i.MX8mq support Andrey Smirnov
2018-06-12 1:52 ` [PATCH v4 14/54] ARM: i.MX: ocotp: Add i.MX8MQ support Andrey Smirnov
2018-06-12 1:52 ` [PATCH v4 15/54] ARM: i.MX: Split shared CCM code into a separate file Andrey Smirnov
2018-06-12 1:52 ` [PATCH v4 16/54] ARM: i.MX: Add IOMUX pad constants for i.MX8 Andrey Smirnov
2018-06-12 1:52 ` [PATCH v4 17/54] ARM: i.MX: Add basic CCM " Andrey Smirnov
2018-06-12 1:52 ` [PATCH v4 18/54] ARM: Add constants and helpers for system counter interface Andrey Smirnov
2018-06-12 1:52 ` [PATCH v4 19/54] clocksource: armv8-timer: Convert explicit assembly into helpers Andrey Smirnov
2018-06-12 1:52 ` [PATCH v4 20/54] ARM: i.MX8: Initialize system counter Andrey Smirnov
2018-06-12 1:52 ` [PATCH v4 21/54] ARM: i.MX: boot: Fix address casting on 64-bit platforms Andrey Smirnov
2018-06-12 1:52 ` [PATCH v4 22/54] ARM: boot: Add trivial i.MX8 support Andrey Smirnov
2018-06-12 1:52 ` [PATCH v4 23/54] ARM: i.MX: xload-esdhc: Rework to make code be less i.MX6-specific Andrey Smirnov
2018-06-12 1:52 ` [PATCH v4 24/54] ARM: i.MX: xload-esdhc: Allow custom buffer address, device offset Andrey Smirnov
2018-06-12 1:52 ` [PATCH v4 25/54] ARM: i.MX: xload-esdhc: Add support for i.MX8 Andrey Smirnov
2018-06-12 1:52 ` [PATCH v4 26/54] pinctrl: i.MX: " Andrey Smirnov
2018-06-12 1:52 ` [PATCH v4 27/54] Documentation: imx: Change block size for 'dd' to 1024 Andrey Smirnov
2018-06-12 1:53 ` [PATCH v4 28/54] Documentation: i.MX: Add missing <soctype> Andrey Smirnov
2018-06-12 1:53 ` [PATCH v4 29/54] clocksource: armv8-timer: Make armv8_clocksource_read() static Andrey Smirnov
2018-06-12 1:53 ` [PATCH v4 30/54] clocksource: armv8-timer: Make use of postcore_platform_driver() Andrey Smirnov
2018-06-12 1:53 ` [PATCH v4 31/54] Port <linux/iopoll.h> from U-Boot Andrey Smirnov
2018-06-12 1:53 ` [PATCH v4 32/54] common/clock: Move delay and timeout functions to lib/ Andrey Smirnov
2018-06-12 1:53 ` [PATCH v4 33/54] clock: Use udelay() to implement mdelay() Andrey Smirnov
2018-06-12 1:53 ` [PATCH v4 34/54] ARM: i.MX8: Add DDRC PHY and DDR CTL base addresses Andrey Smirnov
2018-06-12 1:53 ` [PATCH v4 35/54] Kbuild: Add $(quote) Andrey Smirnov
2018-06-12 1:53 ` [PATCH v4 36/54] Add builtin firmware support Andrey Smirnov
2018-06-12 1:53 ` [PATCH v4 37/54] ARM: i.MX8: Add DDRC PHY support code Andrey Smirnov
2018-06-12 1:53 ` [PATCH v4 38/54] ARM: Specify HAVE_PBL_IMAGE for CPU_64 Andrey Smirnov
2018-06-12 1:53 ` [PATCH v4 39/54] ARM: lib64: Make string functions aware of MMU configuration Andrey Smirnov
2018-06-12 1:53 ` [PATCH v4 40/54] ARM: mmu: Make use of dsb() and isb() helpers Andrey Smirnov
2018-06-12 1:53 ` [PATCH v4 41/54] ARM: cache: Remove unused cache ops struct Andrey Smirnov
2018-06-12 1:53 ` [PATCH v4 42/54] ARM: no-mmu: Disable building for ARMv8 Andrey Smirnov
2018-06-12 1:53 ` [PATCH v4 43/54] ARM: interrupts64: Include ESR value in exception traceback Andrey Smirnov
2018-06-12 1:53 ` [PATCH v4 44/54] ARM: mmu64: Trivial code simplification Andrey Smirnov
2018-06-12 1:53 ` [PATCH v4 45/54] ARM: mmu64: Make use of create_table() Andrey Smirnov
2018-06-12 1:53 ` [PATCH v4 46/54] ARM: mmu64: Convert flags in arch_remap_range() Andrey Smirnov
2018-06-12 1:53 ` [PATCH v4 47/54] ARM: include: dma: Add missing no-MMU stubs Andrey Smirnov
2018-06-12 1:53 ` [PATCH v4 48/54] scripts: imx-image: Drop error return from write_dcd() Andrey Smirnov
2018-06-12 1:53 ` [PATCH v4 49/54] scripts: imx-image: Limit v2 header size to HEADER_LEN Andrey Smirnov
2018-06-12 1:53 ` [PATCH v4 50/54] scripts: imx-image: Use a loop to create multiple header copies Andrey Smirnov
2018-06-12 1:53 ` Andrey Smirnov [this message]
2018-06-12 1:53 ` [PATCH v4 52/54] scripts: imx-image: Add i.MX8MQ support Andrey Smirnov
2018-06-12 1:53 ` [PATCH v4 53/54] ARM: i.MX8: Add i.MX8mq EVK support Andrey Smirnov
2018-06-12 2:58 ` Fabio Estevam
2018-06-12 14:52 ` Andrey Smirnov
2018-06-12 5:49 ` Holger Schurig
2018-06-12 14:53 ` Andrey Smirnov
2018-06-12 1:53 ` [PATCH v4 54/54] ARM: Introduce imx_v8_defconfig Andrey Smirnov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180612015326.26192-52-andrew.smirnov@gmail.com \
--to=andrew.smirnov@gmail.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox