mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: barebox@lists.infradead.org
Subject: [PATCH v4 06/54] mci: imx-esdhc: use dma mapping functions
Date: Mon, 11 Jun 2018 18:52:38 -0700	[thread overview]
Message-ID: <20180612015326.26192-7-andrew.smirnov@gmail.com> (raw)
In-Reply-To: <20180612015326.26192-1-andrew.smirnov@gmail.com>

From: Sascha Hauer <s.hauer@pengutronix.de>

Rather than relying on the fact that addresses can be just casted
into DMA addresses use proper DMA mapping functions.

This fixes compiler warnings when we do DMA on this 32bit only device
on aarch64 SoCs.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/mci/imx-esdhc.c | 53 ++++++++++++++++++++---------------------
 1 file changed, 26 insertions(+), 27 deletions(-)

diff --git a/drivers/mci/imx-esdhc.c b/drivers/mci/imx-esdhc.c
index b91f94b99..8929901d4 100644
--- a/drivers/mci/imx-esdhc.c
+++ b/drivers/mci/imx-esdhc.c
@@ -211,18 +211,14 @@ esdhc_pio_read_write(struct mci_host *mci, struct mci_data *data)
 	return 0;
 }
 
-static int esdhc_setup_data(struct mci_host *mci, struct mci_data *data)
+static int esdhc_setup_data(struct mci_host *mci, struct mci_data *data,
+			    dma_addr_t dma)
 {
 	struct fsl_esdhc_host *host = to_fsl_esdhc(mci);
 	void __iomem *regs = host->regs;
 	u32 wml_value;
 
-	if (IS_ENABLED(CONFIG_MCI_IMX_ESDHC_PIO)) {
-		if (!(data->flags & MMC_DATA_READ))
-			esdhc_write32(regs + SDHCI_DMA_ADDRESS, (u32)data->src);
-		else
-			esdhc_write32(regs + SDHCI_DMA_ADDRESS, (u32)data->dest);
-	} else {
+	if (!IS_ENABLED(CONFIG_MCI_IMX_ESDHC_PIO)) {
 		wml_value = data->blocksize/4;
 
 		if (data->flags & MMC_DATA_READ) {
@@ -230,15 +226,14 @@ static int esdhc_setup_data(struct mci_host *mci, struct mci_data *data)
 				wml_value = 0x10;
 
 			esdhc_clrsetbits32(regs + IMX_SDHCI_WML, WML_RD_WML_MASK, wml_value);
-			esdhc_write32(regs + SDHCI_DMA_ADDRESS, (u32)data->dest);
 		} else {
 			if (wml_value > 0x80)
 				wml_value = 0x80;
 
 			esdhc_clrsetbits32(regs + IMX_SDHCI_WML, WML_WR_WML_MASK,
 						wml_value << 16);
-			esdhc_write32(regs + SDHCI_DMA_ADDRESS, (u32)data->src);
 		}
+		esdhc_write32(regs + SDHCI_DMA_ADDRESS, dma);
 	}
 
 	esdhc_write32(regs + SDHCI_BLOCK_SIZE__BLOCK_COUNT, data->blocks << 16 | data->blocksize);
@@ -250,7 +245,6 @@ static int esdhc_do_data(struct mci_host *mci, struct mci_data *data)
 {
 	struct fsl_esdhc_host *host = to_fsl_esdhc(mci);
 	void __iomem *regs = host->regs;
-	unsigned int num_bytes = data->blocks * data->blocksize;
 	u32 irqstat;
 
 	if (IS_ENABLED(CONFIG_MCI_IMX_ESDHC_PIO))
@@ -267,13 +261,6 @@ static int esdhc_do_data(struct mci_host *mci, struct mci_data *data)
 	} while (!(irqstat & IRQSTAT_TC) &&
 		(esdhc_read32(regs + SDHCI_PRESENT_STATE) & PRSSTAT_DLA));
 
-	if (data->flags & MMC_DATA_WRITE)
-		dma_sync_single_for_cpu((unsigned long)data->src,
-					num_bytes, DMA_TO_DEVICE);
-	else
-		dma_sync_single_for_cpu((unsigned long)data->dest,
-					num_bytes, DMA_FROM_DEVICE);
-
 	return 0;
 }
 
@@ -290,6 +277,9 @@ esdhc_send_cmd(struct mci_host *mci, struct mci_cmd *cmd, struct mci_data *data)
 	void __iomem *regs = host->regs;
 	unsigned int num_bytes = 0;
 	int ret;
+	void *ptr;
+	enum dma_data_direction dir = 0;
+	dma_addr_t dma = 0;
 
 	esdhc_write32(regs + SDHCI_INT_STATUS, -1);
 
@@ -300,19 +290,25 @@ esdhc_send_cmd(struct mci_host *mci, struct mci_cmd *cmd, struct mci_data *data)
 	if (data) {
 		int err;
 
-		err = esdhc_setup_data(mci, data);
-		if(err)
-			return err;
+		if (!IS_ENABLED(CONFIG_MCI_IMX_ESDHC_PIO)) {
+			num_bytes = data->blocks * data->blocksize;
 
-		num_bytes = data->blocks * data->blocksize;
+			if (data->flags & MMC_DATA_WRITE) {
+				ptr = (void *)data->src;
+				dir = DMA_TO_DEVICE;
+			} else {
+				ptr = data->dest;
+				dir = DMA_FROM_DEVICE;
+			}
 
-		if (data->flags & MMC_DATA_WRITE)
-			dma_sync_single_for_device((unsigned long)data->src,
-						   num_bytes, DMA_TO_DEVICE);
-		else
-			dma_sync_single_for_device((unsigned long)data->dest,
-						   num_bytes, DMA_FROM_DEVICE);
+			dma = dma_map_single(host->dev, ptr, num_bytes, dir);
+			if (dma_mapping_error(host->dev, dma))
+				return -EIO;
+		}
 
+		err = esdhc_setup_data(mci, data, dma);
+		if(err)
+			return err;
 	}
 
 	/* Figure out the transfer arguments */
@@ -383,6 +379,9 @@ esdhc_send_cmd(struct mci_host *mci, struct mci_cmd *cmd, struct mci_data *data)
 		ret = esdhc_do_data(mci, data);
 		if (ret)
 			return ret;
+
+		if (!IS_ENABLED(CONFIG_MCI_IMX_ESDHC_PIO))
+			dma_unmap_single(host->dev, dma, num_bytes, dir);
 	}
 
 	esdhc_write32(regs + SDHCI_INT_STATUS, -1);
-- 
2.17.0


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2018-06-12  1:55 UTC|newest]

Thread overview: 59+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-06-12  1:52 [PATCH v4 00/54] ARM: i.MX8MQ and EVK support Andrey Smirnov
2018-06-12  1:52 ` [PATCH v4 01/54] ARM: i.MX: xload: Fix compiler warning Andrey Smirnov
2018-06-12  1:52 ` [PATCH v4 02/54] ARM: i.MX: compile arm32 specific errata only for CPU32 Andrey Smirnov
2018-06-12  1:52 ` [PATCH v4 03/54] ARM: Add i.MX8 support Andrey Smirnov
2018-06-12  1:52 ` [PATCH v4 04/54] aarch64: Add i.MX8 debug UART support Andrey Smirnov
2018-06-12  1:52 ` [PATCH v4 05/54] Include our own include/dt-bindings Andrey Smirnov
2018-06-12  1:52 ` Andrey Smirnov [this message]
2018-06-12  1:52 ` [PATCH v4 07/54] net: fec_imx: remove unnecessary DMA sync ops Andrey Smirnov
2018-06-12  1:52 ` [PATCH v4 08/54] net: fec_imx: Use dma mapping functions Andrey Smirnov
2018-06-12  1:52 ` [PATCH v4 09/54] net: fec_imx: Make use of IS_ALIGNED Andrey Smirnov
2018-06-12  1:52 ` [PATCH v4 10/54] clock: Add i.MX8MQ clock driver Andrey Smirnov
2018-06-12  1:52 ` [PATCH v4 11/54] serial: i.MX: Add i.MX8 support Andrey Smirnov
2018-06-12  1:52 ` [PATCH v4 12/54] mmc: i.MX esdhc: " Andrey Smirnov
2018-06-12  1:52 ` [PATCH v4 13/54] gpio: i.MX: Add i.MX8mq support Andrey Smirnov
2018-06-12  1:52 ` [PATCH v4 14/54] ARM: i.MX: ocotp: Add i.MX8MQ support Andrey Smirnov
2018-06-12  1:52 ` [PATCH v4 15/54] ARM: i.MX: Split shared CCM code into a separate file Andrey Smirnov
2018-06-12  1:52 ` [PATCH v4 16/54] ARM: i.MX: Add IOMUX pad constants for i.MX8 Andrey Smirnov
2018-06-12  1:52 ` [PATCH v4 17/54] ARM: i.MX: Add basic CCM " Andrey Smirnov
2018-06-12  1:52 ` [PATCH v4 18/54] ARM: Add constants and helpers for system counter interface Andrey Smirnov
2018-06-12  1:52 ` [PATCH v4 19/54] clocksource: armv8-timer: Convert explicit assembly into helpers Andrey Smirnov
2018-06-12  1:52 ` [PATCH v4 20/54] ARM: i.MX8: Initialize system counter Andrey Smirnov
2018-06-12  1:52 ` [PATCH v4 21/54] ARM: i.MX: boot: Fix address casting on 64-bit platforms Andrey Smirnov
2018-06-12  1:52 ` [PATCH v4 22/54] ARM: boot: Add trivial i.MX8 support Andrey Smirnov
2018-06-12  1:52 ` [PATCH v4 23/54] ARM: i.MX: xload-esdhc: Rework to make code be less i.MX6-specific Andrey Smirnov
2018-06-12  1:52 ` [PATCH v4 24/54] ARM: i.MX: xload-esdhc: Allow custom buffer address, device offset Andrey Smirnov
2018-06-12  1:52 ` [PATCH v4 25/54] ARM: i.MX: xload-esdhc: Add support for i.MX8 Andrey Smirnov
2018-06-12  1:52 ` [PATCH v4 26/54] pinctrl: i.MX: " Andrey Smirnov
2018-06-12  1:52 ` [PATCH v4 27/54] Documentation: imx: Change block size for 'dd' to 1024 Andrey Smirnov
2018-06-12  1:53 ` [PATCH v4 28/54] Documentation: i.MX: Add missing <soctype> Andrey Smirnov
2018-06-12  1:53 ` [PATCH v4 29/54] clocksource: armv8-timer: Make armv8_clocksource_read() static Andrey Smirnov
2018-06-12  1:53 ` [PATCH v4 30/54] clocksource: armv8-timer: Make use of postcore_platform_driver() Andrey Smirnov
2018-06-12  1:53 ` [PATCH v4 31/54] Port <linux/iopoll.h> from U-Boot Andrey Smirnov
2018-06-12  1:53 ` [PATCH v4 32/54] common/clock: Move delay and timeout functions to lib/ Andrey Smirnov
2018-06-12  1:53 ` [PATCH v4 33/54] clock: Use udelay() to implement mdelay() Andrey Smirnov
2018-06-12  1:53 ` [PATCH v4 34/54] ARM: i.MX8: Add DDRC PHY and DDR CTL base addresses Andrey Smirnov
2018-06-12  1:53 ` [PATCH v4 35/54] Kbuild: Add $(quote) Andrey Smirnov
2018-06-12  1:53 ` [PATCH v4 36/54] Add builtin firmware support Andrey Smirnov
2018-06-12  1:53 ` [PATCH v4 37/54] ARM: i.MX8: Add DDRC PHY support code Andrey Smirnov
2018-06-12  1:53 ` [PATCH v4 38/54] ARM: Specify HAVE_PBL_IMAGE for CPU_64 Andrey Smirnov
2018-06-12  1:53 ` [PATCH v4 39/54] ARM: lib64: Make string functions aware of MMU configuration Andrey Smirnov
2018-06-12  1:53 ` [PATCH v4 40/54] ARM: mmu: Make use of dsb() and isb() helpers Andrey Smirnov
2018-06-12  1:53 ` [PATCH v4 41/54] ARM: cache: Remove unused cache ops struct Andrey Smirnov
2018-06-12  1:53 ` [PATCH v4 42/54] ARM: no-mmu: Disable building for ARMv8 Andrey Smirnov
2018-06-12  1:53 ` [PATCH v4 43/54] ARM: interrupts64: Include ESR value in exception traceback Andrey Smirnov
2018-06-12  1:53 ` [PATCH v4 44/54] ARM: mmu64: Trivial code simplification Andrey Smirnov
2018-06-12  1:53 ` [PATCH v4 45/54] ARM: mmu64: Make use of create_table() Andrey Smirnov
2018-06-12  1:53 ` [PATCH v4 46/54] ARM: mmu64: Convert flags in arch_remap_range() Andrey Smirnov
2018-06-12  1:53 ` [PATCH v4 47/54] ARM: include: dma: Add missing no-MMU stubs Andrey Smirnov
2018-06-12  1:53 ` [PATCH v4 48/54] scripts: imx-image: Drop error return from write_dcd() Andrey Smirnov
2018-06-12  1:53 ` [PATCH v4 49/54] scripts: imx-image: Limit v2 header size to HEADER_LEN Andrey Smirnov
2018-06-12  1:53 ` [PATCH v4 50/54] scripts: imx-image: Use a loop to create multiple header copies Andrey Smirnov
2018-06-12  1:53 ` [PATCH v4 51/54] scripts: imx-image: Share the code to write barebox header Andrey Smirnov
2018-06-12  1:53 ` [PATCH v4 52/54] scripts: imx-image: Add i.MX8MQ support Andrey Smirnov
2018-06-12  1:53 ` [PATCH v4 53/54] ARM: i.MX8: Add i.MX8mq EVK support Andrey Smirnov
2018-06-12  2:58   ` Fabio Estevam
2018-06-12 14:52     ` Andrey Smirnov
2018-06-12  5:49   ` Holger Schurig
2018-06-12 14:53     ` Andrey Smirnov
2018-06-12  1:53 ` [PATCH v4 54/54] ARM: Introduce imx_v8_defconfig Andrey Smirnov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180612015326.26192-7-andrew.smirnov@gmail.com \
    --to=andrew.smirnov@gmail.com \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox