mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: barebox@lists.infradead.org
Subject: [PATCH v5 01/54] ARM: i.MX: xload: Fix compiler warning
Date: Tue, 12 Jun 2018 13:52:17 -0700	[thread overview]
Message-ID: <20180612205310.25745-2-andrew.smirnov@gmail.com> (raw)
In-Reply-To: <20180612205310.25745-1-andrew.smirnov@gmail.com>

From: Sascha Hauer <s.hauer@pengutronix.de>

the ESDHC controller is a 32bit device, so can do DMA only on the
lower 32bit. Fix the compiler warning about casting a pointer to integer
of different size on aarch64 by casting to unsigned long first. Error
out if the destination does not fit into 32bit though.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-imx/xload-esdhc.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-imx/xload-esdhc.c b/arch/arm/mach-imx/xload-esdhc.c
index e774e4e68..bd58bdc64 100644
--- a/arch/arm/mach-imx/xload-esdhc.c
+++ b/arch/arm/mach-imx/xload-esdhc.c
@@ -109,8 +109,13 @@ esdhc_send_cmd(struct esdhc *esdhc, struct mci_cmd *cmd, struct mci_data *data)
 	__udelay(1);
 
 	if (data) {
+		unsigned long dest = (unsigned long)data->dest;
+
+		if (dest > 0xffffffff)
+			return -EINVAL;
+
 		/* Set up for a data transfer if we have one */
-		esdhc_write32(regs + SDHCI_DMA_ADDRESS, (u32)data->dest);
+		esdhc_write32(regs + SDHCI_DMA_ADDRESS, (u32)dest);
 		esdhc_write32(regs + SDHCI_BLOCK_SIZE__BLOCK_COUNT, data->blocks << 16 | SECTOR_SIZE);
 	}
 
-- 
2.17.0


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2018-06-12 20:53 UTC|newest]

Thread overview: 63+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-06-12 20:52 [PATCH v5 00/54] ARM: i.MX8MQ and EVK support Andrey Smirnov
2018-06-12 20:52 ` Andrey Smirnov [this message]
2018-06-12 20:52 ` [PATCH v5 02/54] ARM: i.MX: compile arm32 specific errata only for CPU32 Andrey Smirnov
2018-06-12 20:52 ` [PATCH v5 03/54] ARM: Add i.MX8 support Andrey Smirnov
2018-06-12 20:52 ` [PATCH v5 04/54] aarch64: Add i.MX8 debug UART support Andrey Smirnov
2018-06-12 20:52 ` [PATCH v5 05/54] Include our own include/dt-bindings Andrey Smirnov
2018-06-12 20:52 ` [PATCH v5 06/54] mci: imx-esdhc: use dma mapping functions Andrey Smirnov
2018-06-12 20:52 ` [PATCH v5 07/54] net: fec_imx: remove unnecessary DMA sync ops Andrey Smirnov
2018-06-12 20:52 ` [PATCH v5 08/54] net: fec_imx: Use dma mapping functions Andrey Smirnov
2018-06-12 20:52 ` [PATCH v5 09/54] net: fec_imx: Make use of IS_ALIGNED Andrey Smirnov
2018-06-12 20:52 ` [PATCH v5 10/54] clock: Add i.MX8MQ clock driver Andrey Smirnov
2018-06-12 20:52 ` [PATCH v5 11/54] serial: i.MX: Add i.MX8 support Andrey Smirnov
2018-06-12 20:52 ` [PATCH v5 12/54] mmc: i.MX esdhc: " Andrey Smirnov
2018-06-12 20:52 ` [PATCH v5 13/54] gpio: i.MX: Add i.MX8mq support Andrey Smirnov
2018-06-12 20:52 ` [PATCH v5 14/54] ARM: i.MX: ocotp: Add i.MX8MQ support Andrey Smirnov
2018-06-12 20:52 ` [PATCH v5 15/54] ARM: i.MX: Split shared CCM code into a separate file Andrey Smirnov
2018-06-12 20:52 ` [PATCH v5 16/54] ARM: i.MX: Add IOMUX pad constants for i.MX8 Andrey Smirnov
2018-06-12 20:52 ` [PATCH v5 17/54] ARM: i.MX: Add basic CCM " Andrey Smirnov
2018-06-12 20:52 ` [PATCH v5 18/54] ARM: Add constants and helpers for system counter interface Andrey Smirnov
2018-06-12 20:52 ` [PATCH v5 19/54] clocksource: armv8-timer: Convert explicit assembly into helpers Andrey Smirnov
2018-06-12 20:52 ` [PATCH v5 20/54] ARM: i.MX8: Initialize system counter Andrey Smirnov
2018-06-12 20:52 ` [PATCH v5 21/54] ARM: i.MX: boot: Fix address casting on 64-bit platforms Andrey Smirnov
2018-06-12 20:52 ` [PATCH v5 22/54] ARM: boot: Add trivial i.MX8 support Andrey Smirnov
2018-06-12 20:52 ` [PATCH v5 23/54] ARM: i.MX: xload-esdhc: Rework to make code be less i.MX6-specific Andrey Smirnov
2018-06-12 20:52 ` [PATCH v5 24/54] ARM: i.MX: xload-esdhc: Allow custom buffer address, device offset Andrey Smirnov
2018-06-12 20:52 ` [PATCH v5 25/54] ARM: i.MX: xload-esdhc: Add support for i.MX8 Andrey Smirnov
2018-06-12 20:52 ` [PATCH v5 26/54] pinctrl: i.MX: " Andrey Smirnov
2018-06-12 20:52 ` [PATCH v5 27/54] Documentation: imx: Change block size for 'dd' to 1024 Andrey Smirnov
2018-06-12 20:52 ` [PATCH v5 28/54] Documentation: i.MX: Add missing <soctype> Andrey Smirnov
2018-06-12 20:52 ` [PATCH v5 29/54] clocksource: armv8-timer: Make armv8_clocksource_read() static Andrey Smirnov
2018-06-12 20:52 ` [PATCH v5 30/54] clocksource: armv8-timer: Make use of postcore_platform_driver() Andrey Smirnov
2018-06-12 20:52 ` [PATCH v5 31/54] Port <linux/iopoll.h> from U-Boot Andrey Smirnov
2018-06-13  8:12   ` Sascha Hauer
2018-06-13 12:29     ` Andrey Smirnov
2018-06-12 20:52 ` [PATCH v5 32/54] common/clock: Move delay and timeout functions to lib/ Andrey Smirnov
2018-06-13  8:19   ` Sascha Hauer
2018-06-13 12:26     ` Andrey Smirnov
2018-06-12 20:52 ` [PATCH v5 33/54] clock: Use udelay() to implement mdelay() Andrey Smirnov
2018-06-12 20:52 ` [PATCH v5 34/54] ARM: i.MX8: Add DDRC PHY and DDR CTL base addresses Andrey Smirnov
2018-06-12 20:52 ` [PATCH v5 35/54] Kbuild: Add $(quote) Andrey Smirnov
2018-06-12 20:52 ` [PATCH v5 36/54] Add builtin firmware support Andrey Smirnov
2018-06-12 20:52 ` [PATCH v5 37/54] ARM: i.MX8: Add DDRC PHY support code Andrey Smirnov
2018-06-12 20:52 ` [PATCH v5 38/54] ARM: Specify HAVE_PBL_IMAGE for CPU_64 Andrey Smirnov
2018-06-12 20:52 ` [PATCH v5 39/54] ARM: lib64: Make string functions aware of MMU configuration Andrey Smirnov
2018-06-12 20:52 ` [PATCH v5 40/54] ARM: mmu: Make use of dsb() and isb() helpers Andrey Smirnov
2018-06-12 20:52 ` [PATCH v5 41/54] ARM: cache: Remove unused cache ops struct Andrey Smirnov
2018-06-12 20:52 ` [PATCH v5 42/54] ARM: no-mmu: Disable building for ARMv8 Andrey Smirnov
2018-06-12 20:52 ` [PATCH v5 43/54] ARM: interrupts64: Include ESR value in exception traceback Andrey Smirnov
2018-06-12 20:53 ` [PATCH v5 44/54] ARM: mmu64: Trivial code simplification Andrey Smirnov
2018-06-12 20:53 ` [PATCH v5 45/54] ARM: mmu64: Make use of create_table() Andrey Smirnov
2018-06-12 20:53 ` [PATCH v5 46/54] ARM: mmu64: Convert flags in arch_remap_range() Andrey Smirnov
2018-06-12 20:53 ` [PATCH v5 47/54] ARM: include: dma: Add missing no-MMU stubs Andrey Smirnov
2018-06-12 20:53 ` [PATCH v5 48/54] scripts: imx-image: Drop error return from write_dcd() Andrey Smirnov
2018-06-12 20:53 ` [PATCH v5 49/54] scripts: imx-image: Limit v2 header size to HEADER_LEN Andrey Smirnov
2018-06-12 20:53 ` [PATCH v5 50/54] scripts: imx-image: Use a loop to create multiple header copies Andrey Smirnov
2018-06-12 20:53 ` [PATCH v5 51/54] scripts: imx-image: Share the code to write barebox header Andrey Smirnov
2018-06-12 20:53 ` [PATCH v5 52/54] scripts: imx-image: Add i.MX8MQ support Andrey Smirnov
2018-06-12 20:53 ` [PATCH v5 53/54] ARM: i.MX8: Add i.MX8mq EVK support Andrey Smirnov
2018-06-13  8:49   ` Christian Hemp
2018-06-13 12:33     ` Andrey Smirnov
2018-06-12 20:53 ` [PATCH v5 54/54] ARM: Introduce imx_v8_defconfig Andrey Smirnov
2018-06-13  8:24 ` [PATCH v5 00/54] ARM: i.MX8MQ and EVK support Sascha Hauer
2018-06-13 12:29   ` Andrey Smirnov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180612205310.25745-2-andrew.smirnov@gmail.com \
    --to=andrew.smirnov@gmail.com \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox