From: Roland Hieber <r.hieber@pengutronix.de>
To: barebox@lists.infradead.org
Cc: Roland Hieber <r.hieber@pengutronix.de>
Subject: [PATCH 01/13] scripts: mxsimage: Allow unencrypted images
Date: Wed, 25 Jul 2018 15:36:06 +0200 [thread overview]
Message-ID: <20180725133618.1510-2-r.hieber@pengutronix.de> (raw)
In-Reply-To: <20180725133618.1510-1-r.hieber@pengutronix.de>
From: Sascha Hauer <s.hauer@pengutronix.de>
Normally MXS SoCs only allow to boot images which have been
encrypted with a zero key. If the ENABLE_UNENCTRYPTED_BOOT fuse
is blown then the SoC also allows to boot unencrypted images.
Add an option to the mxsimage tool to generate such images.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Roland Hieber <r.hieber@pengutronix.de>
---
Notes:
submitted by Sascha in https://www.mail-archive.com/barebox@lists.infradead.org/msg26936.html,
but not applied yet.
Typo in subject fixed by me.
scripts/mxsimage.c | 53 +++++++++++++++++++++++++++++-----------------
1 file changed, 33 insertions(+), 20 deletions(-)
diff --git a/scripts/mxsimage.c b/scripts/mxsimage.c
index 5c2c3079de..8a63d76939 100644
--- a/scripts/mxsimage.c
+++ b/scripts/mxsimage.c
@@ -337,6 +337,7 @@ struct sb_image_ctx {
/* Image configuration */
unsigned int verbose_boot:1;
unsigned int silent_dump:1;
+ unsigned int encrypted:1;
const char *input_filename;
const char *output_filename;
const char *cfg_filename;
@@ -484,6 +485,12 @@ static int sb_aes_crypt(struct sb_image_ctx *ictx, uint8_t *in_data,
int ret, outlen;
uint8_t *outbuf;
+ if (!ictx->encrypted) {
+ if (out_data && in_data != out_data)
+ memcpy(out_data, in_data, in_len);
+ return 0;
+ }
+
outbuf = malloc(in_len);
if (!outbuf)
return -ENOMEM;
@@ -645,7 +652,8 @@ static int sb_encrypt_image(struct sb_image_ctx *ictx)
* Key dictionary.
*/
sb_aes_reinit(ictx, 1);
- sb_encrypt_key_dictionary_key(ictx);
+ if (ictx->encrypted)
+ sb_encrypt_key_dictionary_key(ictx);
/*
* Section tags.
@@ -1609,10 +1617,10 @@ static int sb_prefill_image_header(struct sb_image_ctx *ictx)
hdr->timestamp_us = sb_get_timestamp() * 1000000;
/* FIXME -- add proper config option */
- hdr->flags = ictx->verbose_boot ? SB_IMAGE_FLAG_VERBOSE : 0,
+ hdr->flags = ictx->verbose_boot ? SB_IMAGE_FLAG_VERBOSE : 0;
/* FIXME -- We support only default key */
- hdr->key_count = 1;
+ hdr->key_count = ictx->encrypted ? 1 : 0;
return 0;
}
@@ -2450,7 +2458,7 @@ static int sb_build_image(struct sb_image_ctx *ictx)
/* Calculate image size. */
uint32_t size = sizeof(*sb_header) +
ictx->sect_count * sizeof(struct sb_sections_header) +
- sizeof(*sb_dict_key) + sizeof(ictx->digest);
+ sizeof(*sb_dict_key) * sb_header->key_count + sizeof(ictx->digest);
sctx = ictx->sect_head;
while (sctx) {
@@ -2473,8 +2481,10 @@ static int sb_build_image(struct sb_image_ctx *ictx)
sctx = sctx->sect;
};
- memcpy(iptr, sb_dict_key, sizeof(*sb_dict_key));
- iptr += sizeof(*sb_dict_key);
+ if (ictx->encrypted) {
+ memcpy(iptr, sb_dict_key, sizeof(*sb_dict_key));
+ iptr += sizeof(*sb_dict_key);
+ }
sctx = ictx->sect_head;
while (sctx) {
@@ -2516,27 +2526,20 @@ static int sb_build_image(struct sb_image_ctx *ictx)
return 0;
}
-static int mxsimage_generate(const char *configfile, const char *imagefile)
+static int mxsimage_generate(struct sb_image_ctx *ctx)
{
int ret;
- struct sb_image_ctx ctx;
-
- memset(&ctx, 0, sizeof(ctx));
- ctx.cfg_filename = configfile;
- ctx.output_filename = imagefile;
- ctx.verbose_boot = 1;
-
- ret = sb_build_tree_from_cfg(&ctx);
+ ret = sb_build_tree_from_cfg(ctx);
if (ret)
goto fail;
- ret = sb_encrypt_image(&ctx);
+ ret = sb_encrypt_image(ctx);
if (!ret)
- ret = sb_build_image(&ctx);
+ ret = sb_build_image(ctx);
fail:
- sb_free_image(&ctx);
+ sb_free_image(ctx);
return ret;
}
@@ -2546,8 +2549,12 @@ int main(int argc, char *argv[])
int ret;
int opt;
char *configfile = NULL, *outfile = NULL, *verify = NULL;
+ struct sb_image_ctx ctx = {
+ .encrypted = 1,
+ .verbose_boot = 1,
+ };
- while ((opt = getopt(argc, argv, "p:b:c:o:v:")) != -1) {
+ while ((opt = getopt(argc, argv, "p:b:c:o:v:u")) != -1) {
switch (opt) {
case 'p':
prepfile = optarg;
@@ -2564,6 +2571,9 @@ int main(int argc, char *argv[])
case 'v':
verify = optarg;
break;
+ case 'u':
+ ctx.encrypted = 0;
+ break;
default:
exit(1);
}
@@ -2587,7 +2597,10 @@ int main(int argc, char *argv[])
exit(1);
}
- ret = mxsimage_generate(configfile, outfile);
+ ctx.cfg_filename = configfile;
+ ctx.output_filename = outfile;
+
+ ret = mxsimage_generate(&ctx);
if (ret)
exit(1);
--
2.18.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2018-07-25 13:36 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-25 13:36 [PATCH 00/13] MXS/MX28 low-level improvements Roland Hieber
2018-07-25 13:36 ` Roland Hieber [this message]
2018-07-25 13:36 ` [PATCH 02/13] images: MXS: allow generation of unencrypted bootstreams Roland Hieber
2018-07-25 13:36 ` [PATCH 03/13] ARM: MXS: i.MX28: allow setup of low-voltage SDRAM Roland Hieber
2018-07-25 13:36 ` [PATCH 04/13] ARM: MXS: allow configuration of EMI clock dividers Roland Hieber
2018-08-08 6:41 ` Sascha Hauer
2018-07-25 13:36 ` [PATCH 05/13] ARM: MXS: i.MX28: add autodetection of memory banks Roland Hieber
2018-07-27 8:28 ` Roland Hieber
2018-07-31 10:07 ` Roland Hieber
2018-08-08 6:40 ` Sascha Hauer
2018-07-25 13:36 ` [PATCH 06/13] ARM: MXS: refactor mx2*_power_init source configuration Roland Hieber
2018-07-25 13:36 ` [PATCH 07/13] ARM: MXS: allow starting from battery input without 4P2 source enabled Roland Hieber
2018-07-25 13:36 ` [PATCH 08/13] ARM: MXS: make power levels configurable in mx2*_power_init Roland Hieber
2018-07-25 13:36 ` [PATCH 09/13] ARM: MXS: fix VDDx brownout setup logic Roland Hieber
2018-07-25 13:36 ` [PATCH 10/13] ARM: MXS: make VDDx brownout setup more understandable Roland Hieber
2018-07-25 13:36 ` [PATCH 11/13] ARM: MXS: mxs_power_status: use less magic values Roland Hieber
2018-07-25 13:36 ` [PATCH 12/13] ARM: MXS: mxs_power_status: align output Roland Hieber
2018-07-25 13:36 ` [PATCH 13/13] Documentation: MXS: general update and improvements Roland Hieber
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180725133618.1510-2-r.hieber@pengutronix.de \
--to=r.hieber@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox