mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Roland Hieber <r.hieber@pengutronix.de>
To: barebox@lists.infradead.org
Cc: Roland Hieber <r.hieber@pengutronix.de>
Subject: [PATCH 03/13] ARM: MXS: i.MX28: allow setup of low-voltage SDRAM
Date: Wed, 25 Jul 2018 15:36:08 +0200	[thread overview]
Message-ID: <20180725133618.1510-4-r.hieber@pengutronix.de> (raw)
In-Reply-To: <20180725133618.1510-1-r.hieber@pengutronix.de>

The PINCTRL_*_DDR_MODE_* defines are now needed in global scope, so move
them to the respective include header.

Signed-off-by: Roland Hieber <r.hieber@pengutronix.de>
---
 arch/arm/boards/duckbill/lowlevel.c           | 3 ++-
 arch/arm/boards/freescale-mx28-evk/lowlevel.c | 3 ++-
 arch/arm/boards/karo-tx28/lowlevel.c          | 3 ++-
 arch/arm/mach-mxs/include/mach/init.h         | 7 ++++++-
 arch/arm/mach-mxs/mem-init.c                  | 9 +++------
 5 files changed, 15 insertions(+), 10 deletions(-)

diff --git a/arch/arm/boards/duckbill/lowlevel.c b/arch/arm/boards/duckbill/lowlevel.c
index 2922e40f2a..3adda68d77 100644
--- a/arch/arm/boards/duckbill/lowlevel.c
+++ b/arch/arm/boards/duckbill/lowlevel.c
@@ -55,7 +55,8 @@ static noinline void duckbill_init(void)
 
 	pr_debug("initializing SDRAM...\n");
 
-	mx28_mem_init(mx28_dram_vals_default);
+	mx28_mem_init(PINCTRL_EMI_DS_CTRL_DDR_MODE_DDR2,
+			mx28_dram_vals_default);
 
 	pr_debug("DONE\n");
 }
diff --git a/arch/arm/boards/freescale-mx28-evk/lowlevel.c b/arch/arm/boards/freescale-mx28-evk/lowlevel.c
index 4d45a03ba2..9df60210e6 100644
--- a/arch/arm/boards/freescale-mx28-evk/lowlevel.c
+++ b/arch/arm/boards/freescale-mx28-evk/lowlevel.c
@@ -47,7 +47,8 @@ static noinline void freescale_mx28evk_init(void)
 
 	pr_debug("initializing SDRAM...\n");
 
-	mx28_mem_init(mx28_dram_vals_default);
+	mx28_mem_init(PINCTRL_EMI_DS_CTRL_DDR_MODE_DDR2,
+			mx28_dram_vals_default);
 
 	pr_debug("DONE\n");
 }
diff --git a/arch/arm/boards/karo-tx28/lowlevel.c b/arch/arm/boards/karo-tx28/lowlevel.c
index d072637de7..99f8a562cc 100644
--- a/arch/arm/boards/karo-tx28/lowlevel.c
+++ b/arch/arm/boards/karo-tx28/lowlevel.c
@@ -47,7 +47,8 @@ static noinline void karo_tx28_init(void)
 
 	pr_debug("initializing SDRAM...\n");
 
-	mx28_mem_init(mx28_dram_vals_default);
+	mx28_mem_init(PINCTRL_EMI_DS_CTRL_DDR_MODE_DDR2,
+			mx28_dram_vals_default);
 
 	pr_debug("DONE\n");
 }
diff --git a/arch/arm/mach-mxs/include/mach/init.h b/arch/arm/mach-mxs/include/mach/init.h
index 6526d303a1..7021981d41 100644
--- a/arch/arm/mach-mxs/include/mach/init.h
+++ b/arch/arm/mach-mxs/include/mach/init.h
@@ -21,8 +21,13 @@ void mxs_power_wait_pswitch(void);
 extern const uint32_t mx28_dram_vals_default[190];
 extern uint32_t mx23_dram_vals[];
 
+#define PINCTRL_EMI_DS_CTRL_DDR_MODE_LPDDR1	(0b00 << 16)
+#define PINCTRL_EMI_DS_CTRL_DDR_MODE_LVDDR2	(0b10 << 16)
+#define PINCTRL_EMI_DS_CTRL_DDR_MODE_DDR2	(0b11 << 16)
+
 void mx23_mem_init(void);
-void mx28_mem_init(const uint32_t dram_vals[190]);
+void mx28_mem_init(const int emi_ds_ctrl_ddr_mode,
+		const uint32_t dram_vals[190]);
 void mxs_mem_setup_cpu_and_hbus(void);
 void mxs_mem_setup_vdda(void);
 void mxs_mem_init_clock(unsigned char divider);
diff --git a/arch/arm/mach-mxs/mem-init.c b/arch/arm/mach-mxs/mem-init.c
index ac8bfee18e..7bc6be00b4 100644
--- a/arch/arm/mach-mxs/mem-init.c
+++ b/arch/arm/mach-mxs/mem-init.c
@@ -318,18 +318,15 @@ void mx23_mem_init(void)
 	mxs_mem_setup_cpu_and_hbus();
 }
 
-#define PINCTRL_EMI_DS_CTRL_DDR_MODE_DDR2	(0x3 << 16)
-
-void mx28_mem_init(const uint32_t dram_vals[190])
+void mx28_mem_init(const int emi_ds_ctrl_ddr_mode, const uint32_t dram_vals[190])
 {
 	mxs_early_delay(11000);
 
 	/* Fractional divider for ref_emi is 21 ; 480 * 18 / 21 = 411MHz */
 	mxs_mem_init_clock(21);
 
-	/* Set DDR2 mode */
-	writel(PINCTRL_EMI_DS_CTRL_DDR_MODE_DDR2,
-			IMX_IOMUXC_BASE + 0x1b80);
+	/* Set DDR mode */
+	writel(emi_ds_ctrl_ddr_mode, IMX_IOMUXC_BASE + 0x1b80);
 
 	/*
 	 * Configure the DRAM registers
-- 
2.18.0


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2018-07-25 13:36 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-07-25 13:36 [PATCH 00/13] MXS/MX28 low-level improvements Roland Hieber
2018-07-25 13:36 ` [PATCH 01/13] scripts: mxsimage: Allow unencrypted images Roland Hieber
2018-07-25 13:36 ` [PATCH 02/13] images: MXS: allow generation of unencrypted bootstreams Roland Hieber
2018-07-25 13:36 ` Roland Hieber [this message]
2018-07-25 13:36 ` [PATCH 04/13] ARM: MXS: allow configuration of EMI clock dividers Roland Hieber
2018-08-08  6:41   ` Sascha Hauer
2018-07-25 13:36 ` [PATCH 05/13] ARM: MXS: i.MX28: add autodetection of memory banks Roland Hieber
2018-07-27  8:28   ` Roland Hieber
2018-07-31 10:07   ` Roland Hieber
2018-08-08  6:40     ` Sascha Hauer
2018-07-25 13:36 ` [PATCH 06/13] ARM: MXS: refactor mx2*_power_init source configuration Roland Hieber
2018-07-25 13:36 ` [PATCH 07/13] ARM: MXS: allow starting from battery input without 4P2 source enabled Roland Hieber
2018-07-25 13:36 ` [PATCH 08/13] ARM: MXS: make power levels configurable in mx2*_power_init Roland Hieber
2018-07-25 13:36 ` [PATCH 09/13] ARM: MXS: fix VDDx brownout setup logic Roland Hieber
2018-07-25 13:36 ` [PATCH 10/13] ARM: MXS: make VDDx brownout setup more understandable Roland Hieber
2018-07-25 13:36 ` [PATCH 11/13] ARM: MXS: mxs_power_status: use less magic values Roland Hieber
2018-07-25 13:36 ` [PATCH 12/13] ARM: MXS: mxs_power_status: align output Roland Hieber
2018-07-25 13:36 ` [PATCH 13/13] Documentation: MXS: general update and improvements Roland Hieber

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180725133618.1510-4-r.hieber@pengutronix.de \
    --to=r.hieber@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox