From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:67c:670:201:290:27ff:fe1d:cc33]) by bombadil.infradead.org with esmtps (Exim 4.90_1 #2 (Red Hat Linux)) id 1fnJ5n-0004ZD-Nx for barebox@lists.infradead.org; Wed, 08 Aug 2018 07:41:17 +0000 Date: Wed, 8 Aug 2018 09:41:03 +0200 From: Sascha Hauer Message-ID: <20180808074103.gk4exopq4ym3j24y@pengutronix.de> References: MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: kernel ubi boot To: Dimitri Van Dyck | IndigoCare Cc: "barebox@lists.infradead.org" On Thu, Jul 26, 2018 at 01:52:32PM +0000, Dimitri Van Dyck | IndigoCare wrote: > Hi, > > Is it possible to boot zImage from ubi, and not from raw flash? Yes, this should be possible. > If so, from what version is this supported? > > barebox@Voipac VMX53:/ boot > booting nand-dtb-ubi > > Loading OS UBI image '/dev/ubi0.kernel' > using internal devicetree > no image handler found for image type UBI image /dev/ubi0.kernel seems to contain a UBI image and not a kernel image. While I think that you can simply put a zImage into a UBI volume and boot it, there seems to be something wrong in your setup. Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox