From: Roland Hieber <r.hieber@pengutronix.de>
To: barebox@lists.infradead.org
Cc: Roland Hieber <r.hieber@pengutronix.de>
Subject: [PATCH v2 13/14] ARM: MXS: mxs_power_status: align output
Date: Fri, 10 Aug 2018 18:34:59 +0200 [thread overview]
Message-ID: <20180810163500.12042-14-r.hieber@pengutronix.de> (raw)
In-Reply-To: <20180810163500.12042-1-r.hieber@pengutronix.de>
Exemplary previous behaviour:
vddio: 3100mV (BO -200mV), Linreg enabled, Linreg offset: -1, FET enabled
vdda: 1800mV (BO -175mV), Linreg disabled, Linreg offset: -1, FET enabled
vddd: 1200mV (BO -175mV), Linreg enabled, Linreg offset: -1, FET disabled
vddmem: 1500mV (BO -25mV), Linreg disabled
After this patch this looks much cleaner:
vddio: 3100mV (BO -200mV), Linreg enabled, Linreg offset: -1, FET enabled
vdda: 1800mV (BO -175mV), Linreg disabled, Linreg offset: -1, FET enabled
vddd: 1200mV (BO -175mV), Linreg enabled, Linreg offset: -1, FET disabled
vddmem: 1500mV (BO - 25mV), Linreg disabled
Signed-off-by: Roland Hieber <r.hieber@pengutronix.de>
---
arch/arm/mach-mxs/power-init.c | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/arch/arm/mach-mxs/power-init.c b/arch/arm/mach-mxs/power-init.c
index 3ec17dad19..796d3ae259 100644
--- a/arch/arm/mach-mxs/power-init.c
+++ b/arch/arm/mach-mxs/power-init.c
@@ -39,28 +39,28 @@ static void mxs_power_status(void)
#define __REG_BITS(value, fieldname) (((value) & fieldname##_MASK) >> fieldname##_OFFSET)
- printf("vddio: %dmV (BO -%dmV), Linreg enabled, Linreg offset: %d, FET %sabled\n",
+ printf("vddio: %4dmV (BO -%3dmV), Linreg enabled, Linreg offset: %1d, FET %sabled\n",
__REG_BITS(vddio, POWER_VDDIOCTRL_TRG) * 50 + 2800,
__REG_BITS(vddio, POWER_VDDIOCTRL_BO_OFFSET) * 50,
linregofs[__REG_BITS(vddio, POWER_VDDIOCTRL_LINREG_OFFSET)],
- (vddio & POWER_VDDIOCTRL_DISABLE_FET) ? "dis" : "en");
- printf("vdda: %dmV (BO -%dmV), Linreg %sabled, Linreg offset: %d, FET %sabled\n",
+ (vddio & POWER_VDDIOCTRL_DISABLE_FET) ? "dis" : " en");
+ printf("vdda: %4dmV (BO -%3dmV), Linreg %sabled, Linreg offset: %1d, FET %sabled\n",
__REG_BITS(vdda, POWER_VDDACTRL_TRG) * 25 + 1500,
__REG_BITS(vdda, POWER_VDDACTRL_BO_OFFSET) * 25,
- (vdda & POWER_VDDACTRL_ENABLE_LINREG) ? "en" : "dis",
+ (vdda & POWER_VDDACTRL_ENABLE_LINREG) ? " en" : "dis",
linregofs[__REG_BITS(vdda, POWER_VDDACTRL_LINREG_OFFSET)],
- (vdda & POWER_VDDACTRL_DISABLE_FET) ? "dis" : "en");
- printf("vddd: %dmV (BO -%dmV), Linreg %sabled, Linreg offset: %d, FET %sabled\n",
+ (vdda & POWER_VDDACTRL_DISABLE_FET) ? "dis" : " en");
+ printf("vddd: %4dmV (BO -%3dmV), Linreg %sabled, Linreg offset: %1d, FET %sabled\n",
__REG_BITS(vddd, POWER_VDDDCTRL_TRG) * 25 + 800,
__REG_BITS(vddd, POWER_VDDDCTRL_BO_OFFSET) * 25,
- (vddd & POWER_VDDDCTRL_ENABLE_LINREG) ? "en" : "dis",
+ (vddd & POWER_VDDDCTRL_ENABLE_LINREG) ? " en" : "dis",
linregofs[__REG_BITS(vddd, POWER_VDDDCTRL_LINREG_OFFSET)],
- (vddd & POWER_VDDDCTRL_DISABLE_FET) ? "dis" : "en");
- printf("vddmem: %dmV (BO -%dmV), Linreg %sabled\n",
+ (vddd & POWER_VDDDCTRL_DISABLE_FET) ? "dis" : " en");
+ printf("vddmem: %4dmV (BO -%3dmV), Linreg %sabled\n",
__REG_BITS(vddmem, POWER_VDDMEMCTRL_TRG) * 25 + 1100,
/* Note: this area is reserved on i.MX23, yielding 0: */
__REG_BITS(vddmem, MX28_POWER_VDDMEMCTRL_BO_OFFSET) * 25,
- (vddmem & POWER_VDDMEMCTRL_ENABLE_LINREG) ? "en" : "dis");
+ (vddmem & POWER_VDDMEMCTRL_ENABLE_LINREG) ? " en" : "dis");
}
/*
--
2.18.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2018-08-10 16:35 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-10 16:34 [PATCH v2 00/14] MXS low-level improvements Roland Hieber
2018-08-10 16:34 ` [PATCH v2 01/14] scripts: mxsimage: Allow unencrypted images Roland Hieber
2018-08-10 16:34 ` [PATCH v2 02/14] images: MXS: allow generation of unencrypted bootstreams Roland Hieber
2018-08-10 16:34 ` [PATCH v2 03/14] ARM: MXS: i.MX28: allow setup of low-voltage SDRAM Roland Hieber
2018-08-10 16:34 ` [PATCH v2 04/14] ARM: MXS: allow configuration of EMI clock prescaler Roland Hieber
2018-08-10 16:34 ` [PATCH v2 05/14] ARM: i.MX28: Add memory size detection Roland Hieber
2018-08-10 16:34 ` [PATCH v2 06/14] ARM: i.MX23: " Roland Hieber
2018-08-10 19:14 ` Andrey Smirnov
2018-08-10 16:34 ` [PATCH v2 07/14] ARM: MXS: refactor mx2*_power_init source configuration Roland Hieber
2018-08-10 19:29 ` Andrey Smirnov
2018-08-13 13:04 ` Roland Hieber
2018-08-10 16:34 ` [PATCH v2 08/14] ARM: MXS: allow starting from battery input without 4P2 source enabled Roland Hieber
2018-08-10 16:34 ` [PATCH v2 09/14] ARM: MXS: make power levels configurable in mx2*_power_init Roland Hieber
2018-08-10 16:34 ` [PATCH v2 10/14] ARM: MXS: fix VDDx brownout setup logic Roland Hieber
2018-08-10 16:34 ` [PATCH v2 11/14] ARM: MXS: make VDDx brownout setup more understandable Roland Hieber
2018-08-10 16:34 ` [PATCH v2 12/14] ARM: MXS: mxs_power_status: use less magic values Roland Hieber
2018-08-10 16:34 ` Roland Hieber [this message]
2018-08-10 16:35 ` [PATCH v2 14/14] Documentation: MXS: general update and improvements Roland Hieber
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180810163500.12042-14-r.hieber@pengutronix.de \
--to=r.hieber@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox