From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:67c:670:201:290:27ff:fe1d:cc33]) by bombadil.infradead.org with esmtps (Exim 4.90_1 #2 (Red Hat Linux)) id 1frgAW-0006ju-Gb for barebox@lists.infradead.org; Mon, 20 Aug 2018 09:08:15 +0000 Date: Mon, 20 Aug 2018 11:07:55 +0200 From: Roland Hieber Message-ID: <20180820090755.3e4pm6m7hiwy6kdx@pengutronix.de> References: <20180820015736.6680-1-marc@cpdesign.com.au> MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: <20180820015736.6680-1-marc@cpdesign.com.au> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: [PATCH 1/3] ARM: dts: am335x: introduce new "stripped" common.dtsi for PBL use To: marc@cpdesign.com.au Cc: barebox@lists.infradead.org Hello Marc, you can use git-send-email's --reroll-count=2 / -v2 parameter to change the subject line to "PATCH v2", to make clear that a previous variant for this patch series was already discussed on the list. In that case it is also good practice to give a short changelog what has changed between the versions, either in your cover letter (if you use one), or in the individual patches themselves, split from the commit message by an additional "---" section. (You can either write that in your commit message directly, or use `git-send-email --annotate` to annotate the patches before sending, or use git-notes for the changelog and then `git-send-email --notes` when sending, or... there are many workflows.) See [1] or [2] for examples how it would look then. [1]: https://www.mail-archive.com/barebox@lists.infradead.org/msg27422.html [2]: https://www.mail-archive.com/barebox@lists.infradead.org/msg27380.html Cheers, - Roland On Mon, Aug 20, 2018 at 11:57:34AM +1000, marc@cpdesign.com.au wrote: > From: Marc Reilly > > This moves am335x-bone-common.dts to include a "stripped" version of the > bone-common .dtsi (which is initially copied from the present one.) > This is in preparation for updating the bone-common .dtsi to use the > kernel version, which introduces some nodes which rely on clocks etc > which are removed from the "stripped" .dtsi files. > > Signed-off-by: Marc Reilly > --- > arch/arm/dts/am335x-bone-common-strip.dtsi | 297 +++++++++++++++++++++++++++++ > arch/arm/dts/am335x-bone-common.dts | 2 +- > 2 files changed, 298 insertions(+), 1 deletion(-) > create mode 100644 arch/arm/dts/am335x-bone-common-strip.dtsi > > diff --git a/arch/arm/dts/am335x-bone-common-strip.dtsi b/arch/arm/dts/am335x-bone-common-strip.dtsi > new file mode 100644 > index 000000000..e03ae2a8d > --- /dev/null > +++ b/arch/arm/dts/am335x-bone-common-strip.dtsi > @@ -0,0 +1,297 @@ > +/* > + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + */ > + > +/ { > + chosen { > + stdout-path = &uart0; > + }; > + > + cpus { > + cpu@0 { > + cpu0-supply = <&dcdc2_reg>; > + }; > + }; > + > + leds { > + pinctrl-names = "default"; > + pinctrl-0 = <&user_leds_s0>; > + > + compatible = "gpio-leds"; > + > + led@2 { > + label = "beaglebone:green:heartbeat"; > + gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; > + linux,default-trigger = "heartbeat"; > + default-state = "off"; > + }; > + > + led@3 { > + label = "beaglebone:green:mmc0"; > + gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>; > + linux,default-trigger = "mmc0"; > + default-state = "off"; > + }; > + > + led@4 { > + label = "beaglebone:green:usr2"; > + gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; > + linux,default-trigger = "cpu0"; > + default-state = "off"; > + }; > + > + led@5 { > + label = "beaglebone:green:usr3"; > + gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>; > + linux,default-trigger = "mmc1"; > + default-state = "off"; > + }; > + }; > + > + vmmcsd_fixed: fixedregulator@0 { > + compatible = "regulator-fixed"; > + regulator-name = "vmmcsd_fixed"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + }; > +}; > + > +&am33xx_pinmux { > + pinctrl-names = "default"; > + pinctrl-0 = <&clkout2_pin>; > + > + user_leds_s0: user_leds_s0 { > + pinctrl-single,pins = < > + 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */ > + 0x58 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a6.gpio1_22 */ > + 0x5c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a7.gpio1_23 */ > + 0x60 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a8.gpio1_24 */ > + >; > + }; > + > + i2c0_pins: pinmux_i2c0_pins { > + pinctrl-single,pins = < > + 0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ > + 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ > + >; > + }; > + > + uart0_pins: pinmux_uart0_pins { > + pinctrl-single,pins = < > + 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ > + 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ > + >; > + }; > + > + clkout2_pin: pinmux_clkout2_pin { > + pinctrl-single,pins = < > + 0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */ > + >; > + }; > + > + cpsw_default: cpsw_default { > + pinctrl-single,pins = < > + /* Slave 1 */ > + 0x110 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxerr.mii1_rxerr */ > + 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txen.mii1_txen */ > + 0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxdv.mii1_rxdv */ > + 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd3.mii1_txd3 */ > + 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd2.mii1_txd2 */ > + 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd1.mii1_txd1 */ > + 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd0.mii1_txd0 */ > + 0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_txclk.mii1_txclk */ > + 0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxclk.mii1_rxclk */ > + 0x134 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd3.mii1_rxd3 */ > + 0x138 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd2.mii1_rxd2 */ > + 0x13c (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd1.mii1_rxd1 */ > + 0x140 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd0.mii1_rxd0 */ > + >; > + }; > + > + cpsw_sleep: cpsw_sleep { > + pinctrl-single,pins = < > + /* Slave 1 reset value */ > + 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7) > + 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) > + 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7) > + 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7) > + 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7) > + 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) > + 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) > + 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7) > + 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7) > + 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7) > + 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7) > + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) > + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) > + >; > + }; > + > + davinci_mdio_default: davinci_mdio_default { > + pinctrl-single,pins = < > + /* MDIO */ > + 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ > + 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ > + >; > + }; > + > + davinci_mdio_sleep: davinci_mdio_sleep { > + pinctrl-single,pins = < > + /* MDIO reset value */ > + 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) > + 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) > + >; > + }; > + > + mmc1_pins: pinmux_mmc1_pins { > + pinctrl-single,pins = < > + 0x160 (PIN_INPUT | MUX_MODE7) /* GPIO0_6 */ > + >; > + }; > + > + emmc_pins: pinmux_emmc_pins { > + pinctrl-single,pins = < > + 0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */ > + 0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ > + 0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ > + 0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ > + 0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ > + 0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ > + 0x10 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */ > + 0x14 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */ > + 0x18 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */ > + 0x1c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */ > + >; > + }; > +}; > + > +&uart0 { > + pinctrl-names = "default"; > + pinctrl-0 = <&uart0_pins>; > + > + status = "okay"; > +}; > + > +&usb { > + status = "okay"; > +}; > + > +&usb_ctrl_mod { > + status = "okay"; > +}; > + > +&usb0_phy { > + status = "okay"; > +}; > + > +&usb1_phy { > + status = "okay"; > +}; > + > +&usb0 { > + status = "okay"; > + dr_mode = "peripheral"; > +}; > + > +&usb1 { > + status = "okay"; > + dr_mode = "host"; > +}; > + > +&cppi41dma { > + status = "okay"; > +}; > + > +&i2c0 { > + pinctrl-names = "default"; > + pinctrl-0 = <&i2c0_pins>; > + > + status = "okay"; > + clock-frequency = <400000>; > + > + tps: tps@24 { > + reg = <0x24>; > + }; > + > +}; > + > +/include/ "tps65217.dtsi" > + > +&tps { > + regulators { > + dcdc1_reg: regulator@0 { > + regulator-always-on; > + }; > + > + dcdc2_reg: regulator@1 { > + /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ > + regulator-name = "vdd_mpu"; > + regulator-min-microvolt = <925000>; > + regulator-max-microvolt = <1325000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + dcdc3_reg: regulator@2 { > + /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */ > + regulator-name = "vdd_core"; > + regulator-min-microvolt = <925000>; > + regulator-max-microvolt = <1150000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + ldo1_reg: regulator@3 { > + regulator-always-on; > + }; > + > + ldo2_reg: regulator@4 { > + regulator-always-on; > + }; > + > + ldo3_reg: regulator@5 { > + regulator-always-on; > + }; > + > + ldo4_reg: regulator@6 { > + regulator-always-on; > + }; > + }; > +}; > + > +&cpsw_emac0 { > + phy_id = <&davinci_mdio>, <0>; > + phy-mode = "mii"; > +}; > + > +&cpsw_emac1 { > + phy_id = <&davinci_mdio>, <1>; > + phy-mode = "mii"; > +}; > + > +&mac { > + pinctrl-names = "default", "sleep"; > + pinctrl-0 = <&cpsw_default>; > + pinctrl-1 = <&cpsw_sleep>; > + status = "okay"; > +}; > + > +&davinci_mdio { > + pinctrl-names = "default", "sleep"; > + pinctrl-0 = <&davinci_mdio_default>; > + pinctrl-1 = <&davinci_mdio_sleep>; > + status = "okay"; > +}; > + > +&mmc1 { > + status = "okay"; > + bus-width = <0x4>; > + pinctrl-names = "default"; > + pinctrl-0 = <&mmc1_pins>; > + cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; > + cd-inverted; > +}; > diff --git a/arch/arm/dts/am335x-bone-common.dts b/arch/arm/dts/am335x-bone-common.dts > index 0488cbe1f..26896b4c7 100644 > --- a/arch/arm/dts/am335x-bone-common.dts > +++ b/arch/arm/dts/am335x-bone-common.dts > @@ -10,7 +10,7 @@ > #include "am33xx.dtsi" > #include "am33xx-strip.dtsi" > #include "am33xx-clocks-strip.dtsi" > -#include "am335x-bone-common.dtsi" > +#include "am335x-bone-common-strip.dtsi" > > / { > model = "TI AM335x BeagleBone"; > -- > 2.16.4 > > > _______________________________________________ > barebox mailing list > barebox@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/barebox > -- Roland Hieber | r.hieber@pengutronix.de | Pengutronix e.K. | https://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim | Phone: +49-5121-206917-5086 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox