From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from asavdk4.altibox.net ([109.247.116.15]) by bombadil.infradead.org with esmtps (Exim 4.90_1 #2 (Red Hat Linux)) id 1frlXl-0002Qn-4Q for barebox@lists.infradead.org; Mon, 20 Aug 2018 14:52:35 +0000 Date: Mon, 20 Aug 2018 16:52:15 +0200 From: Sam Ravnborg Message-ID: <20180820145215.GA22058@ravnborg.org> MIME-Version: 1.0 Content-Disposition: inline List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: [PATCH v3 0/3] Add Davicom phy + reset-gpios To: Barebox List Cc: Sam Ravnborg Changes in v3: - Consider the v3 a new implmentation - almost nothing was left from v2. Thus also invalidate any former review - sorry. - Dropped the need for the mdio {} node, as this node is only used when there is dedicated HW support for the mdio. - Added so PHY child nodes to ethernet nodes are registered, and as part of registration the PHY nodes are reset if the reset-gpios property is present. - Further dropped that the parsed info is stored in the bus, as we only do reset once, thus there is no need to save the info from the DT - Futher dropped helper function to reset. They was not needed - Named the gpio with the name of the PHY node in the DT. This makes it unique and easier to recognize. Changes in v2: - Added patch to enable Davicom PHY on at91sam9263ek - evaluation kit - Fix so we do reset before comunicating with the PHY - Rename to mdio_reset() - Reference correct binding file in commit log (mdio.txt) - Tested on at91sam9263ek The at91sam9263ek kit do not require the reset like my proprietary board, so no DT changes required Intro: The following patches was necessary to get networking operational on my proprietary target. The target is at91sam9263 based with a Davicom PHY. The Davicom PHY is a straight copy form the Linux kernel with the interrupt routine removed and minor adjustments to the rest. The davicom PHY would not work until it had seen a reset cycle - which I think may be an artifact of the board design. To fix the reset issue I have implemented support for the reset-gpios binding (see net/phy.txt bindings). A minimal implmentation was done, just enough to get my target running. I could have implemented something in macb - but I preferred the more generic solution. Also included are a patch that for the at91sam9263ek evaluation board. The patch adds several extra tools that are usefull for testing, and enable the Davicom PHY. Sam Sam Ravnborg (3): phylib: add Davicom PHY support phylib: add support for reset-gpios at91sam9263ek: add PHY, miitool etc. to config arch/arm/configs/at91sam9263ek_defconfig | 12 ++ drivers/net/phy/Kconfig | 5 + drivers/net/phy/Makefile | 1 drivers/net/phy/davicom.c | 140 +++++++++++++++++++++++++++++++ drivers/net/phy/mdio_bus.c | 82 ++++++++++++++++++ 5 files changed, 239 insertions(+), 1 deletion(-) _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox