[PATCH v4 1/3] phylib: add Davicom PHY support

[Sam Ravnborg <sam@ravnborg.org>]

Based on driver from Linux kernel 4.18.0-rc4

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
---
 drivers/net/phy/Kconfig   |   5 ++
 drivers/net/phy/Makefile  |   1 +
 drivers/net/phy/davicom.c | 140 ++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 146 insertions(+)
 create mode 100644 drivers/net/phy/davicom.c

diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index cda752b65..79fb917ee 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -18,6 +18,11 @@ config AT803X_PHY
 	---help---
 	  Currently supports the AT8030, AT8031 and AT8035 PHYs.
 
+config DAVICOM_PHY
+	bool "Driver for Davicom PHYs"
+	---help---
+	  Currently supports dm9161e and dm9131
+
 config LXT_PHY
 	bool "Driver for the Intel LXT PHYs"
 	---help---
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index 30b20f8ee..4424054d9 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -1,6 +1,7 @@
 obj-y += phy.o mdio_bus.o
 obj-$(CONFIG_AR8327N_PHY)	+= ar8327.o
 obj-$(CONFIG_AT803X_PHY)	+= at803x.o
+obj-$(CONFIG_DAVICOM_PHY)	+= davicom.o
 obj-$(CONFIG_LXT_PHY)		+= lxt.o
 obj-$(CONFIG_MARVELL_PHY)	+= marvell.o
 obj-$(CONFIG_MICREL_PHY)	+= micrel.o
diff --git a/drivers/net/phy/davicom.c b/drivers/net/phy/davicom.c
new file mode 100644
index 000000000..8a784b1e5
--- /dev/null
+++ b/drivers/net/phy/davicom.c
@@ -0,0 +1,140 @@
+/*
+ * drivers/net/phy/davicom.c
+ *
+ * Driver for Davicom PHYs
+ *
+ * Author: Andy Fleming
+ *
+ * Copyright (c) 2004 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <common.h>
+#include <init.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/phy.h>
+
+#define MII_DM9161_SCR		0x10
+#define MII_DM9161_SCR_INIT	0x0610
+#define MII_DM9161_SCR_RMII	0x0100
+
+/* DM9161 Interrupt Register */
+#define MII_DM9161_INTR	0x15
+#define MII_DM9161_INTR_PEND		0x8000
+#define MII_DM9161_INTR_DPLX_MASK	0x0800
+#define MII_DM9161_INTR_SPD_MASK	0x0400
+#define MII_DM9161_INTR_LINK_MASK	0x0200
+#define MII_DM9161_INTR_MASK		0x0100
+#define MII_DM9161_INTR_DPLX_CHANGE	0x0010
+#define MII_DM9161_INTR_SPD_CHANGE	0x0008
+#define MII_DM9161_INTR_LINK_CHANGE	0x0004
+#define MII_DM9161_INTR_INIT 		0x0000
+#define MII_DM9161_INTR_STOP	\
+(MII_DM9161_INTR_DPLX_MASK | MII_DM9161_INTR_SPD_MASK \
+ | MII_DM9161_INTR_LINK_MASK | MII_DM9161_INTR_MASK)
+
+/* DM9161 10BT Configuration/Status */
+#define MII_DM9161_10BTCSR	0x12
+#define MII_DM9161_10BTCSR_INIT	0x7800
+
+MODULE_DESCRIPTION("Davicom PHY driver");
+MODULE_AUTHOR("Andy Fleming");
+MODULE_LICENSE("GPL");
+
+
+static int dm9161_config_aneg(struct phy_device *phydev)
+{
+	int err;
+
+	/* Isolate the PHY */
+	err = phy_write(phydev, MII_BMCR, BMCR_ISOLATE);
+
+	if (err < 0)
+		return err;
+
+	/* Configure the new settings */
+	err = genphy_config_aneg(phydev);
+
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+
+static int dm9161_config_init(struct phy_device *phydev)
+{
+	int err, temp;
+
+	/* Isolate the PHY */
+	err = phy_write(phydev, MII_BMCR, BMCR_ISOLATE);
+
+	if (err < 0)
+		return err;
+
+	switch (phydev->interface) {
+	case PHY_INTERFACE_MODE_MII:
+		temp = MII_DM9161_SCR_INIT;
+		break;
+	case PHY_INTERFACE_MODE_RMII:
+		temp =  MII_DM9161_SCR_INIT | MII_DM9161_SCR_RMII;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* Do not bypass the scrambler/descrambler */
+	err = phy_write(phydev, MII_DM9161_SCR, temp);
+	if (err < 0)
+		return err;
+
+	/* Clear 10BTCSR to default */
+	err = phy_write(phydev, MII_DM9161_10BTCSR, MII_DM9161_10BTCSR_INIT);
+
+	if (err < 0)
+		return err;
+
+	/* Reconnect the PHY, and enable Autonegotiation */
+	return phy_write(phydev, MII_BMCR, BMCR_ANENABLE);
+}
+
+static struct phy_driver dm91xx_driver[] = {
+{
+	.phy_id		= 0x0181b880,
+	.drv.name	= "Davicom DM9161E",
+	.phy_id_mask	= 0x0ffffff0,
+	.features	= PHY_BASIC_FEATURES,
+	.config_init	= dm9161_config_init,
+	.config_aneg	= dm9161_config_aneg,
+}, {
+	.phy_id		= 0x0181b8b0,
+	.drv.name	= "Davicom DM9161B/C",
+	.phy_id_mask	= 0x0ffffff0,
+	.features	= PHY_BASIC_FEATURES,
+	.config_init	= dm9161_config_init,
+	.config_aneg	= dm9161_config_aneg,
+}, {
+	.phy_id		= 0x0181b8a0,
+	.drv.name	= "Davicom DM9161A",
+	.phy_id_mask	= 0x0ffffff0,
+	.features	= PHY_BASIC_FEATURES,
+	.config_init	= dm9161_config_init,
+	.config_aneg	= dm9161_config_aneg,
+}, {
+	.phy_id		= 0x00181b80,
+	.drv.name	= "Davicom DM9131",
+	.phy_id_mask	= 0x0ffffff0,
+	.features	= PHY_BASIC_FEATURES,
+} };
+
+static int dm9161_init(void)
+{
+	return phy_drivers_register(dm91xx_driver,
+		ARRAY_SIZE(dm91xx_driver));
+}
+fs_initcall(dm9161_init);
-- 
2.12.0


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox