From: Aleksander Morgado <aleksander@aleksander.es>
To: barebox@lists.infradead.org
Cc: andrew.smirnov@gmail.com, Aleksander Morgado <aleksander@aleksander.es>
Subject: [PATCH v2 6/7] ratp: use pr_ macros to print messages
Date: Wed, 12 Sep 2018 15:45:49 +0200 [thread overview]
Message-ID: <20180912134550.3970-7-aleksander@aleksander.es> (raw)
In-Reply-To: <20180912134550.3970-1-aleksander@aleksander.es>
Following suggestions in other patch reviews, the RAPT commands are
updated to use pr_err() instead of plain printf() to report errors
to the user.
Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
---
common/ratp/md.c | 12 +++++++-----
common/ratp/mw.c | 14 ++++++++------
common/ratp/reset.c | 6 ++++--
3 files changed, 19 insertions(+), 13 deletions(-)
diff --git a/common/ratp/md.c b/common/ratp/md.c
index 5b877947c..2e5a956cb 100644
--- a/common/ratp/md.c
+++ b/common/ratp/md.c
@@ -15,6 +15,8 @@
*
*/
+#define pr_fmt(fmt) "barebox-ratp: md: " fmt
+
#include <common.h>
#include <ratp_bb.h>
#include <init.h>
@@ -121,7 +123,7 @@ static int ratp_cmd_md(const struct ratp_bb *req, int req_len,
/* At least message header should be valid */
if (req_len < sizeof(*md_req)) {
- printf("ratp md ignored: size mismatch (%d < %zu)\n",
+ pr_err("ignored: size mismatch (%d < %zu)\n",
req_len, sizeof (*md_req));
ret = -EINVAL;
goto out;
@@ -130,7 +132,7 @@ static int ratp_cmd_md(const struct ratp_bb *req, int req_len,
/* Validate buffer position and size */
buffer_offset = be16_to_cpu(md_req->buffer_offset);
if (req_len < buffer_offset) {
- printf("ratp md ignored: invalid buffer offset (%d < %hu)\n",
+ pr_err("ignored: invalid buffer offset (%d < %hu)\n",
req_len, buffer_offset);
ret = -EINVAL;
goto out;
@@ -141,20 +143,20 @@ static int ratp_cmd_md(const struct ratp_bb *req, int req_len,
/* Validate path position and size */
path_offset = be16_to_cpu(md_req->path_offset);
if (path_offset != 0) {
- printf("ratp md ignored: invalid path offset\n");
+ pr_err("ignored: invalid path offset\n");
ret = -EINVAL;
goto out;
}
path_size = be16_to_cpu(md_req->path_size);
if (!path_size) {
- printf("ratp md ignored: no filepath given\n");
+ pr_err("ignored: no filepath given\n");
ret = -EINVAL;
goto out;
}
/* Validate buffer size */
if (buffer_size < path_size) {
- printf("ratp mw ignored: size mismatch (%d < %hu): path may not be fully given\n",
+ pr_err("ignored: size mismatch (%d < %hu): path may not be fully given\n",
req_len, path_size);
ret = -EINVAL;
goto out;
diff --git a/common/ratp/mw.c b/common/ratp/mw.c
index 3234d7dac..0579da3c1 100644
--- a/common/ratp/mw.c
+++ b/common/ratp/mw.c
@@ -16,6 +16,8 @@
*
*/
+#define pr_fmt(fmt) "barebox-ratp: mw: " fmt
+
#include <common.h>
#include <ratp_bb.h>
#include <init.h>
@@ -77,7 +79,7 @@ static int ratp_cmd_mw(const struct ratp_bb *req, int req_len,
/* At least message header should be valid */
if (req_len < sizeof(*mw_req)) {
- printf("ratp mw ignored: size mismatch (%d < %zu)\n",
+ pr_err("ignored: size mismatch (%d < %zu)\n",
req_len, sizeof (*mw_req));
ret = -EINVAL;
goto out;
@@ -86,7 +88,7 @@ static int ratp_cmd_mw(const struct ratp_bb *req, int req_len,
/* Validate buffer position and size */
buffer_offset = be16_to_cpu(mw_req->buffer_offset);
if (req_len < buffer_offset) {
- printf("ratp mw ignored: invalid buffer offset (%d < %hu)\n",
+ pr_err("ignored: invalid buffer offset (%d < %hu)\n",
req_len, buffer_offset);
ret = -EINVAL;
goto out;
@@ -97,13 +99,13 @@ static int ratp_cmd_mw(const struct ratp_bb *req, int req_len,
/* Validate path position and size */
path_offset = be16_to_cpu(mw_req->path_offset);
if (path_offset != 0) {
- printf("ratp mw ignored: invalid path offset\n");
+ pr_err("ignored: invalid path offset\n");
ret = -EINVAL;
goto out;
}
path_size = be16_to_cpu(mw_req->path_size);
if (!path_size) {
- printf("ratp mw ignored: no filepath given\n");
+ pr_err("ignored: no filepath given\n");
ret = -EINVAL;
goto out;
}
@@ -111,7 +113,7 @@ static int ratp_cmd_mw(const struct ratp_bb *req, int req_len,
/* Validate data position and size */
data_offset = be16_to_cpu(mw_req->data_offset);
if (data_offset != (path_offset + path_size)) {
- printf("ratp mw ignored: invalid path offset\n");
+ pr_err("ignored: invalid path offset\n");
ret = -EINVAL;
goto out;
}
@@ -123,7 +125,7 @@ static int ratp_cmd_mw(const struct ratp_bb *req, int req_len,
/* Validate buffer size */
if (buffer_size < (path_size + data_size)) {
- printf("ratp mw ignored: size mismatch (%d < %hu): path or data not be fully given\n",
+ pr_err("ignored: size mismatch (%d < %hu): path or data not be fully given\n",
req_len, path_size + data_size);
ret = -EINVAL;
goto out;
diff --git a/common/ratp/reset.c b/common/ratp/reset.c
index 60b6ff536..5439f344f 100644
--- a/common/ratp/reset.c
+++ b/common/ratp/reset.c
@@ -17,6 +17,8 @@
*
*/
+#define pr_fmt(fmt) "barebox-ratp: reset: " fmt
+
#include <common.h>
#include <command.h>
#include <ratp_bb.h>
@@ -35,11 +37,11 @@ static int ratp_cmd_reset(const struct ratp_bb *req, int req_len,
struct ratp_bb_reset *reset_req = (struct ratp_bb_reset *)req;
if (req_len < sizeof (*reset_req)) {
- printf ("ratp reset ignored: size mismatch (%d < %zu)\n", req_len, sizeof (*reset_req));
+ pr_err("ignored: size mismatch (%d < %zu)\n", req_len, sizeof (*reset_req));
return 2;
}
- debug("running reset %s\n", reset_req->force ? "(forced)" : "");
+ pr_debug("running %s\n", reset_req->force ? "(forced)" : "");
if (!reset_req->force)
shutdown_barebox();
--
2.19.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2018-09-12 13:46 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-12 13:45 [PATCH v2 0/7] RATP i2c and GPIO support Aleksander Morgado
2018-09-12 13:45 ` [PATCH v2 1/7] ratp: implement i2c read/write support Aleksander Morgado
2018-09-12 13:45 ` [PATCH v2 2/7] bbremote: " Aleksander Morgado
2018-09-12 13:45 ` [PATCH v2 3/7] ratp: implement support for GPIO commands Aleksander Morgado
2018-09-12 13:45 ` [PATCH v2 4/7] bbremote: implement support for GPIO operations Aleksander Morgado
2018-09-12 13:45 ` [PATCH v2 5/7] ratp: use __packed instead of the full form Aleksander Morgado
2018-09-12 13:45 ` Aleksander Morgado [this message]
2018-09-12 13:45 ` [PATCH v2 7/7] ratp: fix incorrect whitespaces in method calls Aleksander Morgado
2018-09-17 7:50 ` [PATCH v2 0/7] RATP i2c and GPIO support Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180912134550.3970-7-aleksander@aleksander.es \
--to=aleksander@aleksander.es \
--cc=andrew.smirnov@gmail.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox