From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: barebox@lists.infradead.org
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Subject: [PATCH 1/7] net: fec_imx: Drop extra indentation level by exiting early
Date: Mon, 17 Sep 2018 22:21:16 -0700 [thread overview]
Message-ID: <20180918052122.12248-2-andrew.smirnov@gmail.com> (raw)
In-Reply-To: <20180918052122.12248-1-andrew.smirnov@gmail.com>
Drop extra indentation level by exiting early which also allows us to
check for bd_status & FEC_RBD_EMPTY instead of !(bd_status &
FEC_RBD_EMPTY).
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
drivers/net/fec_imx.c | 53 ++++++++++++++++++++++---------------------
1 file changed, 27 insertions(+), 26 deletions(-)
diff --git a/drivers/net/fec_imx.c b/drivers/net/fec_imx.c
index 94a159e2b..904eba30a 100644
--- a/drivers/net/fec_imx.c
+++ b/drivers/net/fec_imx.c
@@ -568,35 +568,36 @@ static int fec_recv(struct eth_device *dev)
*/
bd_status = readw(&rbd->status);
- if (!(bd_status & FEC_RBD_EMPTY)) {
- if ((bd_status & FEC_RBD_LAST) && !(bd_status & FEC_RBD_ERR) &&
- ((readw(&rbd->data_length) - 4) > 14)) {
-
- if (fec_is_imx28(fec))
- imx28_fix_endianess_rd(
- phys_to_virt(readl(&rbd->data_pointer)),
- (readw(&rbd->data_length) + 3) >> 2);
-
- /*
- * Get buffer address and size
- */
- frame = phys_to_virt(readl(&rbd->data_pointer));
- frame_length = readw(&rbd->data_length) - 4;
- net_receive(dev, frame->data, frame_length);
- len = frame_length;
- } else {
- if (bd_status & FEC_RBD_ERR) {
- dev_warn(&dev->dev, "error frame: 0x%p 0x%08x\n", rbd, bd_status);
- }
- }
+ if (bd_status & FEC_RBD_EMPTY)
+ return 0;
+
+ if ((bd_status & FEC_RBD_LAST) && !(bd_status & FEC_RBD_ERR) &&
+ ((readw(&rbd->data_length) - 4) > 14)) {
+
+ if (fec_is_imx28(fec))
+ imx28_fix_endianess_rd(
+ phys_to_virt(readl(&rbd->data_pointer)),
+ (readw(&rbd->data_length) + 3) >> 2);
+
/*
- * free the current buffer, restart the engine
- * and move forward to the next buffer
+ * Get buffer address and size
*/
- fec_rbd_clean(fec->rbd_index == (FEC_RBD_NUM - 1) ? 1 : 0, rbd);
- fec_rx_task_enable(fec);
- fec->rbd_index = (fec->rbd_index + 1) % FEC_RBD_NUM;
+ frame = phys_to_virt(readl(&rbd->data_pointer));
+ frame_length = readw(&rbd->data_length) - 4;
+ net_receive(dev, frame->data, frame_length);
+ len = frame_length;
+ } else {
+ if (bd_status & FEC_RBD_ERR) {
+ dev_warn(&dev->dev, "error frame: 0x%p 0x%08x\n", rbd, bd_status);
+ }
}
+ /*
+ * free the current buffer, restart the engine
+ * and move forward to the next buffer
+ */
+ fec_rbd_clean(fec->rbd_index == (FEC_RBD_NUM - 1) ? 1 : 0, rbd);
+ fec_rx_task_enable(fec);
+ fec->rbd_index = (fec->rbd_index + 1) % FEC_RBD_NUM;
return len;
}
--
2.17.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2018-09-18 5:22 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-18 5:21 [PATCH 0/7] non-coherent Rx buffers in FEC and some small fixes Andrey Smirnov
2018-09-18 5:21 ` Andrey Smirnov [this message]
2018-09-18 5:21 ` [PATCH 2/7] net: fec_imx: Don't check bd_status & FEC_RBD_ERR twice Andrey Smirnov
2018-09-18 5:21 ` [PATCH 3/7] net: fec_imx: Read data_length only once Andrey Smirnov
2018-09-18 5:21 ` [PATCH 4/7] net: fec_imx: Drop struct fec_frame Andrey Smirnov
2018-09-18 5:21 ` [PATCH 5/7] net: fec_imx: Drop frame_length Andrey Smirnov
2018-09-18 5:21 ` [PATCH 6/7] net: fec_imx: Make use of readx_poll_timeout() macros Andrey Smirnov
2018-09-18 5:21 ` [PATCH 7/7] net: fec_imx: Do not use DMA coherent memory for Rx buffers Andrey Smirnov
2019-01-14 12:21 ` Uwe Kleine-König
2019-01-14 14:17 ` Uwe Kleine-König
2018-09-19 7:41 ` [PATCH 0/7] non-coherent Rx buffers in FEC and some small fixes Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180918052122.12248-2-andrew.smirnov@gmail.com \
--to=andrew.smirnov@gmail.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox