mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: barebox@lists.infradead.org
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Subject: [PATCH 00/16]
Date: Sun,  7 Oct 2018 23:35:26 -0700	[thread overview]
Message-ID: <20181008063542.18709-1-andrew.smirnov@gmail.com> (raw)

Everyone:

Patches in this series are a result of my work on porting Linux code
for MV88E6xxx switches to Barebox.

     - Patch 1 is loosely related header fix

     - Patch 2 adds clocksource support for ARM global time, needed on
       VF610 in order to get an accurate clocksource. MV88E6xxx EEPROM
       supporte code turned out to be dependent on that.

     - Pathes 3 and 4 are clocksource related fixes

     - Patches 5, 6, 7, 8 update the device naming scheme used by
       Barebox driver code. Old scheme couldn't handle devices created
       for DT nodes with identical names. This was the case on ZII
       VF610 Development Board Rev. C which had two switch devices.

    - Patch 9 is documentation/small code fix for generic MDIO bus
      code

    - Patches 10, 11 bring needed preprocessor constants from Linux kernel

    - Patch 12 prevents PHYs masked by MDIO bus's phy_maks from being
      probed

    - Patch 13 allows custom platform deviecs to be attached to an MDIO bus

    - Patch 14 exposes internal MDIO bus on MV88E6xxx devices

    - Patch 15 support for EEPROM devices attached to MV88E6xxx devices

    - Patch 16 exposes ports that don't have a PHY attached as
      "virtual" PHY devices (RPU2 needs this code to properly
      configure port connected to FEC)

NOTE: This is quite a mix and I am more than happy to split this
series in several if current patch grouping is problematic.

Tested on the following H/W:

     - ZII i.MX6Q RDU2, MV88E6352 switch
     - ZII i.MX51 RDU1, MV88E6161 switch
     - ZII i.MX7D RPU2, MV88E6352 switch
     - ZII VF610 CFU1, MV88E6352 switch
     - ZII VF610 SPU3, MV88E6390X switch
     - ZII VF610 Development Board Rev. C, MV88E6390X switch x 2

Feedback is welcome!

Thanks,
Andrey Smirnov

Andrey Smirnov (16):
  ARM: Do not expose ARMv8 functions on ARMv7
  clocksource: Add ARM global timer support
  i.MX: Move GPT driver to drivers/clocksource
  clocksource: Introduce ARCH_HAS_IMX_GPT
  of: Demote "Bad cell count for" to debug
  drivers: Introduce dev_set_name()
  linux: string: Port kbasename()
  of: Port latest of_device_make_bus_id() implementation
  mdio_bus: Fix documentation for mdio_bus_match()
  include: linux: phy: Add missing PHY_INTERFACE_* constants
  include: linux: ethtool: Add missing *_UNKNOWN constants
  net: phy: Check phy_mask in get_phy_device()
  mdio_bus: Allow for non PHY-devices on MDIO buses
  net: phy: Add basic driver for MV88E6XXX switches from Marvell
  net: phy: mv88e6xxx: Port EEPROM support code
  net: phy: mv88e6xxx: Add support for MAC ports

 arch/arm/include/asm/system.h                 |   2 +-
 arch/arm/mach-imx/Kconfig                     |  11 +
 arch/arm/mach-imx/Makefile                    |   1 -
 arch/arm/mach-imx/iim.c                       |   2 +-
 .../arm/mach-imx/include/mach/devices-imx51.h |   2 +-
 .../arm/mach-imx/include/mach/devices-imx53.h |   2 +-
 arch/arm/mach-mxs/include/mach/devices.h      |   2 +-
 arch/arm/mach-mxs/ocotp.c                     |   2 +-
 arch/sandbox/board/console.c                  |   2 +-
 common/console.c                              |   4 +-
 common/state/state.c                          |   2 +-
 drivers/aiodev/core.c                         |   2 +-
 drivers/amba/bus.c                            |   2 +-
 drivers/ata/disk_ata_drive.c                  |   4 +-
 drivers/base/bus.c                            |   2 +-
 drivers/base/driver.c                         |  38 +-
 drivers/base/resource.c                       |   2 +-
 drivers/clocksource/Kconfig                   |  11 +
 drivers/clocksource/Makefile                  |   2 +
 drivers/clocksource/arm_global_timer.c        | 113 +++
 .../clocksource/timer-imx-gpt.c               |   0
 drivers/efi/efi-device.c                      |   2 +-
 drivers/firmware/socfpga.c                    |   2 +-
 drivers/i2c/i2c.c                             |   4 +-
 drivers/mci/mci-core.c                        |   4 +-
 drivers/mfd/rave-sp.c                         |   2 +-
 drivers/mtd/core.c                            |   2 +-
 drivers/mtd/spi-nor/cadence-quadspi.c         |   2 +-
 drivers/mtd/ubi/build.c                       |   2 +-
 drivers/mtd/ubi/vmt.c                         |   4 +-
 drivers/net/cpsw.c                            |   2 +-
 drivers/net/e1000/eeprom.c                    |   2 +-
 drivers/net/orion-gbe.c                       |   2 +-
 drivers/net/phy/Kconfig                       |   6 +
 drivers/net/phy/Makefile                      |   1 +
 drivers/net/phy/mdio_bus.c                    |  24 +-
 drivers/net/phy/mv88e6xxx/Makefile            |   5 +
 drivers/net/phy/mv88e6xxx/chip.c              | 945 ++++++++++++++++++
 drivers/net/phy/mv88e6xxx/chip.h              | 143 +++
 drivers/net/phy/mv88e6xxx/global2.c           | 389 +++++++
 drivers/net/phy/mv88e6xxx/global2.h           |  70 ++
 drivers/net/phy/mv88e6xxx/port.c              | 666 ++++++++++++
 drivers/net/phy/mv88e6xxx/port.h              | 127 +++
 drivers/net/phy/phy.c                         |  15 +-
 drivers/nvmem/core.c                          |   2 +-
 drivers/nvmem/ocotp.c                         |   2 +-
 drivers/of/address.c                          |   4 +-
 drivers/of/platform.c                         |  80 +-
 drivers/pci/bus.c                             |   3 +-
 drivers/phy/phy-core.c                        |   2 +-
 drivers/pwm/core.c                            |   2 +-
 drivers/rtc/class.c                           |   2 +-
 drivers/spi/spi.c                             |   2 +-
 drivers/usb/core/usb.c                        |   5 +-
 drivers/usb/gadget/udc-core.c                 |   4 +-
 drivers/usb/musb/musb_dsps.c                  |   2 +-
 drivers/video/backlight.c                     |   2 +-
 drivers/video/fb.c                            |   2 +-
 drivers/w1/w1.c                               |   4 +-
 drivers/watchdog/wd_core.c                    |   2 +-
 fs/fs.c                                       |   2 +-
 include/driver.h                              |   5 +-
 include/linux/ethtool.h                       |   3 +
 include/linux/phy.h                           |   9 +
 include/linux/string.h                        |  12 +
 net/eth.c                                     |   2 +-
 66 files changed, 2653 insertions(+), 129 deletions(-)
 create mode 100644 drivers/clocksource/arm_global_timer.c
 rename arch/arm/mach-imx/clocksource.c => drivers/clocksource/timer-imx-gpt.c (100%)
 create mode 100644 drivers/net/phy/mv88e6xxx/Makefile
 create mode 100644 drivers/net/phy/mv88e6xxx/chip.c
 create mode 100644 drivers/net/phy/mv88e6xxx/chip.h
 create mode 100644 drivers/net/phy/mv88e6xxx/global2.c
 create mode 100644 drivers/net/phy/mv88e6xxx/global2.h
 create mode 100644 drivers/net/phy/mv88e6xxx/port.c
 create mode 100644 drivers/net/phy/mv88e6xxx/port.h

-- 
2.17.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

             reply	other threads:[~2018-10-08  6:36 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-08  6:35 Andrey Smirnov [this message]
2018-10-08  6:35 ` [PATCH 01/16] ARM: Do not expose ARMv8 functions on ARMv7 Andrey Smirnov
2018-10-08  6:35 ` [PATCH 02/16] clocksource: Add ARM global timer support Andrey Smirnov
2018-10-08  8:17   ` Sascha Hauer
2018-10-08 15:37     ` Andrey Smirnov
2018-10-08  6:35 ` [PATCH 03/16] i.MX: Move GPT driver to drivers/clocksource Andrey Smirnov
2018-10-08  6:35 ` [PATCH 04/16] clocksource: Introduce ARCH_HAS_IMX_GPT Andrey Smirnov
2018-10-08  6:35 ` [PATCH 05/16] of: Demote "Bad cell count for" to debug Andrey Smirnov
2018-10-08  6:35 ` [PATCH 06/16] drivers: Introduce dev_set_name() Andrey Smirnov
2018-10-09 15:41   ` Sam Ravnborg
2018-10-09 17:10     ` Andrey Smirnov
2018-10-08  6:35 ` [PATCH 07/16] linux: string: Port kbasename() Andrey Smirnov
2018-10-08  6:35 ` [PATCH 08/16] of: Port latest of_device_make_bus_id() implementation Andrey Smirnov
2018-10-08  6:35 ` [PATCH 09/16] mdio_bus: Fix documentation for mdio_bus_match() Andrey Smirnov
2018-10-08  6:35 ` [PATCH 10/16] include: linux: phy: Add missing PHY_INTERFACE_* constants Andrey Smirnov
2018-10-08  6:35 ` [PATCH 11/16] include: linux: ethtool: Add missing *_UNKNOWN constants Andrey Smirnov
2018-10-08  6:35 ` [PATCH 12/16] net: phy: Check phy_mask in get_phy_device() Andrey Smirnov
2018-10-08  6:35 ` [PATCH 13/16] mdio_bus: Allow for non PHY-devices on MDIO buses Andrey Smirnov
2018-10-08  8:44   ` Sascha Hauer
2018-10-08 15:41     ` Andrey Smirnov
2018-10-08  6:35 ` [PATCH 14/16] net: phy: Add basic driver for MV88E6XXX switches from Marvell Andrey Smirnov
2018-10-08  6:35 ` [PATCH 15/16] net: phy: mv88e6xxx: Port EEPROM support code Andrey Smirnov
2018-10-08  6:35 ` [PATCH 16/16] net: phy: mv88e6xxx: Add support for MAC ports Andrey Smirnov
2018-10-09 17:30 ` [PATCH 00/16] Andrey Smirnov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181008063542.18709-1-andrew.smirnov@gmail.com \
    --to=andrew.smirnov@gmail.com \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox