From: Sam Ravnborg <sam@ravnborg.org>
To: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH v3 02/22] clocksource: Add ARM global timer support
Date: Mon, 15 Oct 2018 22:46:33 +0200 [thread overview]
Message-ID: <20181015204633.GA17344@ravnborg.org> (raw)
In-Reply-To: <20181015022125.24020-3-andrew.smirnov@gmail.com>
Hi Andrey.
On Sun, Oct 14, 2018 at 07:21:05PM -0700, Andrey Smirnov wrote:
> Port corresponding Linux kernel driver. Currently VFxxx SoC is the
> intended consumer because it doesn't include common i.MX GPT block
> used as clocksource by other i.MX SoCs.
>
> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
> ---
> drivers/clocksource/Kconfig | 4 +
> drivers/clocksource/Makefile | 1 +
> drivers/clocksource/arm_global_timer.c | 113 +++++++++++++++++++++++++
> 3 files changed, 118 insertions(+)
> create mode 100644 drivers/clocksource/arm_global_timer.c
>
> diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
> index 3d63f7ff1..6a6c9362a 100644
> --- a/drivers/clocksource/Kconfig
> +++ b/drivers/clocksource/Kconfig
> @@ -70,3 +70,7 @@ config CLOCKSOURCE_ARMV8_TIMER
> bool
> default y
> depends on ARM && CPU_64v8
> +
> +config CLOCKSOURCE_ARM_GLOBAL_TIMER
> + bool
> + depends on ARM && CPU_V7
Mix of space and tab in the above.
Sam
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2018-10-15 20:48 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-15 2:21 [PATCH v3 00/22] MV88E6xxx switch family support Andrey Smirnov
2018-10-15 2:21 ` [PATCH v3 01/22] ARM: Do not expose ARMv8 functions on ARMv7 Andrey Smirnov
2018-10-15 2:21 ` [PATCH v3 02/22] clocksource: Add ARM global timer support Andrey Smirnov
2018-10-15 20:46 ` Sam Ravnborg [this message]
2018-10-15 21:27 ` Andrey Smirnov
2018-10-15 2:21 ` [PATCH v3 03/22] VFxxx: Select CLOCKSOURCE_ARM_GLOBAL_TIMER Andrey Smirnov
2018-10-15 2:21 ` [PATCH v3 04/22] i.MX: Move GPT driver to drivers/clocksource Andrey Smirnov
2018-10-15 2:21 ` [PATCH v3 05/22] clocksource: Introduce ARCH_HAS_IMX_GPT Andrey Smirnov
2018-10-15 2:21 ` [PATCH v3 06/22] of: Demote "Bad cell count for" to debug Andrey Smirnov
2018-10-15 2:21 ` [PATCH v3 07/22] aiodev: Don't try to use DT node name as aiodev->name Andrey Smirnov
2018-10-15 2:21 ` [PATCH v3 08/22] aiodev: imx_thermal: Give aiodev a more descriptive name Andrey Smirnov
2018-10-15 2:21 ` [PATCH v3 09/22] aiodev: qoriq_thermal: " Andrey Smirnov
2018-10-15 2:21 ` [PATCH v3 10/22] drivers: Introduce dev_set_name() Andrey Smirnov
2018-10-15 2:21 ` [PATCH v3 11/22] base: Don't use shared buffer for results of dev_id() Andrey Smirnov
2018-10-15 2:21 ` [PATCH v3 12/22] drivers: base: Convert device_d name to be dynamically allocated Andrey Smirnov
2018-10-15 2:21 ` [PATCH v3 13/22] linux: string: Port kbasename() Andrey Smirnov
2018-10-15 2:21 ` [PATCH v3 14/22] of: Port latest of_device_make_bus_id() implementation Andrey Smirnov
2018-10-15 2:21 ` [PATCH v3 15/22] mdio_bus: Fix documentation for mdio_bus_match() Andrey Smirnov
2018-10-15 2:21 ` [PATCH v3 16/22] include: linux: phy: Add missing PHY_INTERFACE_* constants Andrey Smirnov
2018-10-15 2:21 ` [PATCH v3 17/22] include: linux: ethtool: Add missing *_UNKNOWN constants Andrey Smirnov
2018-10-15 2:21 ` [PATCH v3 18/22] net: phy: Check phy_mask in get_phy_device() Andrey Smirnov
2018-10-15 2:21 ` [PATCH v3 19/22] mdio_bus: Allow for non PHY-devices on MDIO buses Andrey Smirnov
2018-10-15 2:21 ` [PATCH v3 20/22] net: phy: Add basic driver for MV88E6XXX switches from Marvell Andrey Smirnov
2018-10-15 21:19 ` Sam Ravnborg
2018-10-15 21:35 ` Andrey Smirnov
2018-10-16 5:46 ` Sam Ravnborg
2018-10-15 2:21 ` [PATCH v3 21/22] net: phy: mv88e6xxx: Port EEPROM support code Andrey Smirnov
2018-10-15 2:21 ` [PATCH v3 22/22] net: phy: mv88e6xxx: Add support for MAC ports Andrey Smirnov
2018-10-15 3:33 ` [PATCH v3 00/22] MV88E6xxx switch family support Andrey Smirnov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181015204633.GA17344@ravnborg.org \
--to=sam@ravnborg.org \
--cc=andrew.smirnov@gmail.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox