mail archive of the barebox mailing list
 help / color / mirror / Atom feed
* [PATCH] miitool: Fix inconsistent spacing
@ 2018-10-16  0:38 Andrey Smirnov
  2018-10-16  6:15 ` Uwe Kleine-König
  2018-10-16  7:06 ` Sascha Hauer
  0 siblings, 2 replies; 5+ messages in thread
From: Andrey Smirnov @ 2018-10-16  0:38 UTC (permalink / raw)
  To: barebox; +Cc: Andrey Smirnov

Make sure that there's a space between device name and it's status
string regardless if if device is using "id" field or not.

Before:

barebox@ZII RDU2 Board:/ miitool
mdio0-phy00: mdio:no link
mdio1-phy15: 2188000.ethernet@2188000:10 Mbit, half duplex, no link
mdio1-phy16: 2188000.ethernet@2188000:10 Mbit, half duplex, no link
mdio2-phy00: 2188000.ethernet@2188000:mdio:switch@0:no link
mdio2-phy01: 2188000.ethernet@2188000:mdio:switch@0:no link
mdio2-phy02: 2188000.ethernet@2188000:mdio:switch@0:negotiated 100baseTx-FD, link ok
mdio2-phy03: 2188000.ethernet@2188000:mdio:switch@0:no link
mdio2-phy04: 2188000.ethernet@2188000:mdio:switch@0:no link
mdio3-phy01: eth1: negotiated 1000baseT-FD flow-control, link ok

After:

barebox@ZII RDU2 Board:/ miitool
mdio0-phy00: mdio: no link
mdio1-phy15: 2188000.ethernet@2188000: 10 Mbit, half duplex, no link
mdio1-phy16: 2188000.ethernet@2188000: 10 Mbit, half duplex, no link
mdio2-phy00: 2188000.ethernet@2188000:mdio:switch@0: no link
mdio2-phy01: 2188000.ethernet@2188000:mdio:switch@0: no link
mdio2-phy02: 2188000.ethernet@2188000:mdio:switch@0: no link
mdio2-phy03: 2188000.ethernet@2188000:mdio:switch@0: no link
mdio2-phy04: 2188000.ethernet@2188000:mdio:switch@0: no link
mdio3-phy01: eth1: no link

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
 commands/miitool.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/commands/miitool.c b/commands/miitool.c
index dea4f853c..acf61421b 100644
--- a/commands/miitool.c
+++ b/commands/miitool.c
@@ -115,7 +115,7 @@ static int show_basic_mii(struct mii_bus *mii, struct phy_device *phydev,
 	for (i = 0; i < 32; i++)
 		mii_val[i] = mii->read(mii, phydev->addr, i);
 
-	printf((mii->parent->id) < 0 ? "%s: %s:" : "%s: %s%d: ",
+	printf((mii->parent->id) < 0 ? "%s: %s: " : "%s: %s%d: ",
 	       phydev->cdev.name, mii->parent->name, mii->parent->id);
 
 
-- 
2.17.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 5+ messages in thread
* Re: [PATCH] miitool: Fix inconsistent spacing
  2018-10-16  0:38 [PATCH] miitool: Fix inconsistent spacing Andrey Smirnov
@ 2018-10-16  6:15 ` Uwe Kleine-König
  2018-10-16  7:06 ` Sascha Hauer
  1 sibling, 0 replies; 5+ messages in thread
From: Uwe Kleine-König @ 2018-10-16  6:15 UTC (permalink / raw)
  To: Andrey Smirnov; +Cc: barebox

On Mon, Oct 15, 2018 at 05:38:35PM -0700, Andrey Smirnov wrote:
> Make sure that there's a space between device name and it's status
> string regardless if if device is using "id" field or not.
> 
> Before:
> 
> barebox@ZII RDU2 Board:/ miitool
> mdio0-phy00: mdio:no link
> mdio1-phy15: 2188000.ethernet@2188000:10 Mbit, half duplex, no link
> mdio1-phy16: 2188000.ethernet@2188000:10 Mbit, half duplex, no link
> mdio2-phy00: 2188000.ethernet@2188000:mdio:switch@0:no link
> mdio2-phy01: 2188000.ethernet@2188000:mdio:switch@0:no link
> mdio2-phy02: 2188000.ethernet@2188000:mdio:switch@0:negotiated 100baseTx-FD, link ok
> mdio2-phy03: 2188000.ethernet@2188000:mdio:switch@0:no link
> mdio2-phy04: 2188000.ethernet@2188000:mdio:switch@0:no link
> mdio3-phy01: eth1: negotiated 1000baseT-FD flow-control, link ok
> 
> After:
> 
> barebox@ZII RDU2 Board:/ miitool
> mdio0-phy00: mdio: no link
> mdio1-phy15: 2188000.ethernet@2188000: 10 Mbit, half duplex, no link
> mdio1-phy16: 2188000.ethernet@2188000: 10 Mbit, half duplex, no link
> mdio2-phy00: 2188000.ethernet@2188000:mdio:switch@0: no link
> mdio2-phy01: 2188000.ethernet@2188000:mdio:switch@0: no link
> mdio2-phy02: 2188000.ethernet@2188000:mdio:switch@0: no link
> mdio2-phy03: 2188000.ethernet@2188000:mdio:switch@0: no link
> mdio2-phy04: 2188000.ethernet@2188000:mdio:switch@0: no link
> mdio3-phy01: eth1: no link

the patch seems to have some impact on the link status of mdio2-phy02
and mdio3-phy01. I wonder where this comes from :-)

Other than that:

Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

because it makes the output better readable.

Best regards
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 5+ messages in thread
* Re: [PATCH] miitool: Fix inconsistent spacing
  2018-10-16  0:38 [PATCH] miitool: Fix inconsistent spacing Andrey Smirnov
  2018-10-16  6:15 ` Uwe Kleine-König
@ 2018-10-16  7:06 ` Sascha Hauer
  1 sibling, 0 replies; 5+ messages in thread
From: Sascha Hauer @ 2018-10-16  7:06 UTC (permalink / raw)
  To: Andrey Smirnov; +Cc: barebox

On Mon, Oct 15, 2018 at 05:38:35PM -0700, Andrey Smirnov wrote:
> Make sure that there's a space between device name and it's status
> string regardless if if device is using "id" field or not.
> 
> Before:
> 
> barebox@ZII RDU2 Board:/ miitool
> mdio0-phy00: mdio:no link
> mdio1-phy15: 2188000.ethernet@2188000:10 Mbit, half duplex, no link
> mdio1-phy16: 2188000.ethernet@2188000:10 Mbit, half duplex, no link
> mdio2-phy00: 2188000.ethernet@2188000:mdio:switch@0:no link
> mdio2-phy01: 2188000.ethernet@2188000:mdio:switch@0:no link
> mdio2-phy02: 2188000.ethernet@2188000:mdio:switch@0:negotiated 100baseTx-FD, link ok
> mdio2-phy03: 2188000.ethernet@2188000:mdio:switch@0:no link
> mdio2-phy04: 2188000.ethernet@2188000:mdio:switch@0:no link
> mdio3-phy01: eth1: negotiated 1000baseT-FD flow-control, link ok
> 
> After:
> 
> barebox@ZII RDU2 Board:/ miitool
> mdio0-phy00: mdio: no link
> mdio1-phy15: 2188000.ethernet@2188000: 10 Mbit, half duplex, no link
> mdio1-phy16: 2188000.ethernet@2188000: 10 Mbit, half duplex, no link
> mdio2-phy00: 2188000.ethernet@2188000:mdio:switch@0: no link
> mdio2-phy01: 2188000.ethernet@2188000:mdio:switch@0: no link
> mdio2-phy02: 2188000.ethernet@2188000:mdio:switch@0: no link
> mdio2-phy03: 2188000.ethernet@2188000:mdio:switch@0: no link
> mdio2-phy04: 2188000.ethernet@2188000:mdio:switch@0: no link
> mdio3-phy01: eth1: no link

Looks better. Applied, thanks

Sascha

> 
> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
> ---
>  commands/miitool.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/commands/miitool.c b/commands/miitool.c
> index dea4f853c..acf61421b 100644
> --- a/commands/miitool.c
> +++ b/commands/miitool.c
> @@ -115,7 +115,7 @@ static int show_basic_mii(struct mii_bus *mii, struct phy_device *phydev,
>  	for (i = 0; i < 32; i++)
>  		mii_val[i] = mii->read(mii, phydev->addr, i);
>  
> -	printf((mii->parent->id) < 0 ? "%s: %s:" : "%s: %s%d: ",
> +	printf((mii->parent->id) < 0 ? "%s: %s: " : "%s: %s%d: ",
>  	       phydev->cdev.name, mii->parent->name, mii->parent->id);
>  
>  
> -- 
> 2.17.1
> 
> 
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 5+ messages in thread
* Re: [PATCH] miitool: Fix inconsistent spacing
  2018-10-27  1:31 ` [PATCH] miitool: Fix inconsistent spacing Andrey Smirnov
@ 2018-10-27  1:34   ` Andrey Smirnov
  0 siblings, 0 replies; 5+ messages in thread
From: Andrey Smirnov @ 2018-10-27  1:34 UTC (permalink / raw)
  To: Barebox List

On Fri, Oct 26, 2018 at 6:31 PM Andrey Smirnov <andrew.smirnov@gmail.com> wrote:
>
> Make sure that there's a space between device name and it's status
> string regardless if if device is using "id" field or not.
>
> Before:
>
> barebox@ZII RDU2 Board:/ miitool
> mdio0-phy00: mdio:no link
> mdio1-phy15: 2188000.ethernet@2188000:10 Mbit, half duplex, no link
> mdio1-phy16: 2188000.ethernet@2188000:10 Mbit, half duplex, no link
> mdio2-phy00: 2188000.ethernet@2188000:mdio:switch@0:no link
> mdio2-phy01: 2188000.ethernet@2188000:mdio:switch@0:no link
> mdio2-phy02: 2188000.ethernet@2188000:mdio:switch@0:negotiated 100baseTx-FD, link ok
> mdio2-phy03: 2188000.ethernet@2188000:mdio:switch@0:no link
> mdio2-phy04: 2188000.ethernet@2188000:mdio:switch@0:no link
> mdio3-phy01: eth1: negotiated 1000baseT-FD flow-control, link ok
>
> After:
>
> barebox@ZII RDU2 Board:/ miitool
> mdio0-phy00: mdio: no link
> mdio1-phy15: 2188000.ethernet@2188000: 10 Mbit, half duplex, no link
> mdio1-phy16: 2188000.ethernet@2188000: 10 Mbit, half duplex, no link
> mdio2-phy00: 2188000.ethernet@2188000:mdio:switch@0: no link
> mdio2-phy01: 2188000.ethernet@2188000:mdio:switch@0: no link
> mdio2-phy02: 2188000.ethernet@2188000:mdio:switch@0: no link
> mdio2-phy03: 2188000.ethernet@2188000:mdio:switch@0: no link
> mdio2-phy04: 2188000.ethernet@2188000:mdio:switch@0: no link
> mdio3-phy01: eth1: no link
>
> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>

Ugh, didn't mean to send this patch out. Sorry for the noise.

Thanks,
Andrey Smirnov


> ---
>  commands/miitool.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/commands/miitool.c b/commands/miitool.c
> index dea4f853c..acf61421b 100644
> --- a/commands/miitool.c
> +++ b/commands/miitool.c
> @@ -115,7 +115,7 @@ static int show_basic_mii(struct mii_bus *mii, struct phy_device *phydev,
>         for (i = 0; i < 32; i++)
>                 mii_val[i] = mii->read(mii, phydev->addr, i);
>
> -       printf((mii->parent->id) < 0 ? "%s: %s:" : "%s: %s%d: ",
> +       printf((mii->parent->id) < 0 ? "%s: %s: " : "%s: %s%d: ",
>                phydev->cdev.name, mii->parent->name, mii->parent->id);
>
>
> --
> 2.17.1
>

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 5+ messages in thread
* [PATCH] miitool: Fix inconsistent spacing
  2018-10-27  1:31 [PATCH 0/6] Switch EEPROM aliases to ZII boards Andrey Smirnov
@ 2018-10-27  1:31 ` Andrey Smirnov
  2018-10-27  1:34   ` Andrey Smirnov
  0 siblings, 1 reply; 5+ messages in thread
From: Andrey Smirnov @ 2018-10-27  1:31 UTC (permalink / raw)
  To: barebox; +Cc: Andrey Smirnov

Make sure that there's a space between device name and it's status
string regardless if if device is using "id" field or not.

Before:

barebox@ZII RDU2 Board:/ miitool
mdio0-phy00: mdio:no link
mdio1-phy15: 2188000.ethernet@2188000:10 Mbit, half duplex, no link
mdio1-phy16: 2188000.ethernet@2188000:10 Mbit, half duplex, no link
mdio2-phy00: 2188000.ethernet@2188000:mdio:switch@0:no link
mdio2-phy01: 2188000.ethernet@2188000:mdio:switch@0:no link
mdio2-phy02: 2188000.ethernet@2188000:mdio:switch@0:negotiated 100baseTx-FD, link ok
mdio2-phy03: 2188000.ethernet@2188000:mdio:switch@0:no link
mdio2-phy04: 2188000.ethernet@2188000:mdio:switch@0:no link
mdio3-phy01: eth1: negotiated 1000baseT-FD flow-control, link ok

After:

barebox@ZII RDU2 Board:/ miitool
mdio0-phy00: mdio: no link
mdio1-phy15: 2188000.ethernet@2188000: 10 Mbit, half duplex, no link
mdio1-phy16: 2188000.ethernet@2188000: 10 Mbit, half duplex, no link
mdio2-phy00: 2188000.ethernet@2188000:mdio:switch@0: no link
mdio2-phy01: 2188000.ethernet@2188000:mdio:switch@0: no link
mdio2-phy02: 2188000.ethernet@2188000:mdio:switch@0: no link
mdio2-phy03: 2188000.ethernet@2188000:mdio:switch@0: no link
mdio2-phy04: 2188000.ethernet@2188000:mdio:switch@0: no link
mdio3-phy01: eth1: no link

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
 commands/miitool.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/commands/miitool.c b/commands/miitool.c
index dea4f853c..acf61421b 100644
--- a/commands/miitool.c
+++ b/commands/miitool.c
@@ -115,7 +115,7 @@ static int show_basic_mii(struct mii_bus *mii, struct phy_device *phydev,
 	for (i = 0; i < 32; i++)
 		mii_val[i] = mii->read(mii, phydev->addr, i);
 
-	printf((mii->parent->id) < 0 ? "%s: %s:" : "%s: %s%d: ",
+	printf((mii->parent->id) < 0 ? "%s: %s: " : "%s: %s%d: ",
 	       phydev->cdev.name, mii->parent->name, mii->parent->id);
 
 
-- 
2.17.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 5+ messages in thread
end of thread, other threads:[~2018-10-27  1:36 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-10-16  0:38 [PATCH] miitool: Fix inconsistent spacing Andrey Smirnov
2018-10-16  6:15 ` Uwe Kleine-König
2018-10-16  7:06 ` Sascha Hauer
2018-10-27  1:31 [PATCH 0/6] Switch EEPROM aliases to ZII boards Andrey Smirnov
2018-10-27  1:31 ` [PATCH] miitool: Fix inconsistent spacing Andrey Smirnov
2018-10-27  1:34   ` Andrey Smirnov

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox