From: Sascha Hauer <s.hauer@pengutronix.de>
To: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH] miitool: Fix inconsistent spacing
Date: Tue, 16 Oct 2018 09:06:12 +0200 [thread overview]
Message-ID: <20181016070612.z5liuyxomwumamua@pengutronix.de> (raw)
In-Reply-To: <20181016003835.11165-1-andrew.smirnov@gmail.com>
On Mon, Oct 15, 2018 at 05:38:35PM -0700, Andrey Smirnov wrote:
> Make sure that there's a space between device name and it's status
> string regardless if if device is using "id" field or not.
>
> Before:
>
> barebox@ZII RDU2 Board:/ miitool
> mdio0-phy00: mdio:no link
> mdio1-phy15: 2188000.ethernet@2188000:10 Mbit, half duplex, no link
> mdio1-phy16: 2188000.ethernet@2188000:10 Mbit, half duplex, no link
> mdio2-phy00: 2188000.ethernet@2188000:mdio:switch@0:no link
> mdio2-phy01: 2188000.ethernet@2188000:mdio:switch@0:no link
> mdio2-phy02: 2188000.ethernet@2188000:mdio:switch@0:negotiated 100baseTx-FD, link ok
> mdio2-phy03: 2188000.ethernet@2188000:mdio:switch@0:no link
> mdio2-phy04: 2188000.ethernet@2188000:mdio:switch@0:no link
> mdio3-phy01: eth1: negotiated 1000baseT-FD flow-control, link ok
>
> After:
>
> barebox@ZII RDU2 Board:/ miitool
> mdio0-phy00: mdio: no link
> mdio1-phy15: 2188000.ethernet@2188000: 10 Mbit, half duplex, no link
> mdio1-phy16: 2188000.ethernet@2188000: 10 Mbit, half duplex, no link
> mdio2-phy00: 2188000.ethernet@2188000:mdio:switch@0: no link
> mdio2-phy01: 2188000.ethernet@2188000:mdio:switch@0: no link
> mdio2-phy02: 2188000.ethernet@2188000:mdio:switch@0: no link
> mdio2-phy03: 2188000.ethernet@2188000:mdio:switch@0: no link
> mdio2-phy04: 2188000.ethernet@2188000:mdio:switch@0: no link
> mdio3-phy01: eth1: no link
Looks better. Applied, thanks
Sascha
>
> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
> ---
> commands/miitool.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/commands/miitool.c b/commands/miitool.c
> index dea4f853c..acf61421b 100644
> --- a/commands/miitool.c
> +++ b/commands/miitool.c
> @@ -115,7 +115,7 @@ static int show_basic_mii(struct mii_bus *mii, struct phy_device *phydev,
> for (i = 0; i < 32; i++)
> mii_val[i] = mii->read(mii, phydev->addr, i);
>
> - printf((mii->parent->id) < 0 ? "%s: %s:" : "%s: %s%d: ",
> + printf((mii->parent->id) < 0 ? "%s: %s: " : "%s: %s%d: ",
> phydev->cdev.name, mii->parent->name, mii->parent->id);
>
>
> --
> 2.17.1
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2018-10-16 7:06 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-16 0:38 Andrey Smirnov
2018-10-16 6:15 ` Uwe Kleine-König
2018-10-16 7:06 ` Sascha Hauer [this message]
2018-10-27 1:31 [PATCH 0/6] Switch EEPROM aliases to ZII boards Andrey Smirnov
2018-10-27 1:31 ` [PATCH] miitool: Fix inconsistent spacing Andrey Smirnov
2018-10-27 1:34 ` Andrey Smirnov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181016070612.z5liuyxomwumamua@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=andrew.smirnov@gmail.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox