From: Ladislav Michl <ladis@linux-mips.org>
To: barebox@lists.infradead.org
Subject: [PATCH 1/3] mtd: atmel_nand: replace printk with dev_info
Date: Thu, 25 Oct 2018 01:37:54 +0200 [thread overview]
Message-ID: <20181024233754.GA17799@lenoch> (raw)
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
---
drivers/mtd/nand/atmel_nand.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index 0b9071c9b..4bc944d24 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -1429,14 +1429,14 @@ static int __init atmel_nand_probe(struct device_d *dev)
}
if (gpio_get_value(host->board->det_pin)) {
- printk("No SmartMedia card inserted.\n");
+ dev_info(dev, "No SmartMedia card inserted.\n");
res = -ENXIO;
goto err_no_card;
}
}
if (host->board->on_flash_bbt) {
- printk(KERN_INFO "atmel_nand: Use On Flash BBT\n");
+ dev_info(dev, "Use On Flash BBT\n");
nand_chip->bbt_options |= NAND_BBT_USE_FLASH;
}
--
2.19.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next reply other threads:[~2018-10-24 23:38 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-24 23:37 Ladislav Michl [this message]
2018-10-24 23:39 ` [PATCH 2/3] mtd: nand: add accessors, macros for in-memory BBT Ladislav Michl
2018-10-24 23:39 ` [PATCH 3/3] mtd: nand: don't break long print messages Ladislav Michl
2018-10-26 9:52 ` [PATCH 1/3] mtd: atmel_nand: replace printk with dev_info Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181024233754.GA17799@lenoch \
--to=ladis@linux-mips.org \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox