[PATCH 1/3] mtd: atmel_nand: replace printk with dev_info

[PATCH 1/3] mtd: atmel_nand: replace printk with dev_info

[Ladislav Michl]

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
---
 drivers/mtd/nand/atmel_nand.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index 0b9071c9b..4bc944d24 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -1429,14 +1429,14 @@ static int __init atmel_nand_probe(struct device_d *dev)
 		}
 
 		if (gpio_get_value(host->board->det_pin)) {
-			printk("No SmartMedia card inserted.\n");
+			dev_info(dev, "No SmartMedia card inserted.\n");
 			res = -ENXIO;
 			goto err_no_card;
 		}
 	}
 
 	if (host->board->on_flash_bbt) {
-		printk(KERN_INFO "atmel_nand: Use On Flash BBT\n");
+		dev_info(dev, "Use On Flash BBT\n");
 		nand_chip->bbt_options |= NAND_BBT_USE_FLASH;
 	}
 
-- 
2.19.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 2/3] mtd: nand: add accessors, macros for in-memory BBT

[Ladislav Michl]

Linux commit 771c568bcf91:

  There is an abundance of magic numbers and complicated shifting/masking
  logic in the in-memory BBT code which makes the code unnecessary complex
  and hard to read.

  This patch adds macros to represent the 00b, 01b, 10b, and 11b
  memory-BBT magic numbers, as well as two accessor functions for reading
  and marking the memory-BBT bitfield for a given block.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
---
 drivers/mtd/nand/nand_bbt.c | 70 +++++++++++++++++++++++++------------
 1 file changed, 48 insertions(+), 22 deletions(-)

diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c
index 1357c5cc6..ce1d22e5c 100644
--- a/drivers/mtd/nand/nand_bbt.c
+++ b/drivers/mtd/nand/nand_bbt.c
@@ -69,6 +69,28 @@
 #include <errno.h>
 #include <malloc.h>
 
+#define BBT_BLOCK_GOOD		0x00
+#define BBT_BLOCK_WORN		0x01
+#define BBT_BLOCK_RESERVED	0x02
+#define BBT_BLOCK_FACTORY_BAD	0x03
+
+#define BBT_ENTRY_MASK		0x03
+#define BBT_ENTRY_SHIFT		2
+
+static inline uint8_t bbt_get_entry(struct nand_chip *chip, int block)
+{
+	uint8_t entry = chip->bbt[block >> BBT_ENTRY_SHIFT];
+	entry >>= (block & BBT_ENTRY_MASK) * 2;
+	return entry & BBT_ENTRY_MASK;
+}
+
+static inline void bbt_mark_entry(struct nand_chip *chip, int block,
+		uint8_t mark)
+{
+	uint8_t msk = (mark & BBT_ENTRY_MASK) << ((block & BBT_ENTRY_MASK) * 2);
+	chip->bbt[block >> BBT_ENTRY_SHIFT] |= msk;
+}
+
 static int check_pattern_no_oob(uint8_t *buf, struct nand_bbt_descr *td)
 {
 	if (memcmp(buf, td->pattern, td->len))
@@ -214,7 +236,9 @@ static int read_bbt(struct mtd_info *mtd, uint8_t *buf, int page, int num,
 				if (reserved_block_code && (tmp == reserved_block_code)) {
 					pr_info("nand_read_bbt: reserved block at 0x%012llx\n",
 						 (loff_t)((offs << 2) + (act >> 1)) << this->bbt_erase_shift);
-					this->bbt[offs + (act >> 3)] |= 0x2 << (act & 0x06);
+					bbt_mark_entry(this, (offs << 2) +
+							(act >> 1),
+							BBT_BLOCK_RESERVED);
 					mtd->ecc_stats.bbtblocks++;
 					continue;
 				}
@@ -222,9 +246,13 @@ static int read_bbt(struct mtd_info *mtd, uint8_t *buf, int page, int num,
 					 (loff_t)((offs << 2) + (act >> 1)) << this->bbt_erase_shift);
 				/* Factory marked bad or worn out? */
 				if (tmp == 0)
-					this->bbt[offs + (act >> 3)] |= 0x3 << (act & 0x06);
+					bbt_mark_entry(this, (offs << 2) +
+							(act >> 1),
+							BBT_BLOCK_FACTORY_BAD);
 				else
-					this->bbt[offs + (act >> 3)] |= 0x1 << (act & 0x06);
+					bbt_mark_entry(this, (offs << 2) +
+							(act >> 1),
+							BBT_BLOCK_WORN);
 				mtd->ecc_stats.badblocks++;
 			}
 		}
@@ -520,7 +548,7 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf,
 			return ret;
 
 		if (ret) {
-			this->bbt[i >> 3] |= 0x03 << (i & 0x6);
+			bbt_mark_entry(this, i >> 1, BBT_BLOCK_FACTORY_BAD);
 			pr_warn("Bad eraseblock %d at 0x%012llx\n",
 				i >> 1, (unsigned long long)from);
 			mtd->ecc_stats.badblocks++;
@@ -704,10 +732,9 @@ static int write_bbt(struct mtd_info *mtd, uint8_t *buf,
 		for (i = 0; i < td->maxblocks; i++) {
 			int block = startblock + dir * i;
 			/* Check, if the block is bad */
-			switch ((this->bbt[block >> 2] >>
-				 (2 * (block & 0x03))) & 0x03) {
-			case 0x01:
-			case 0x03:
+			switch (bbt_get_entry(this, block)) {
+			case BBT_BLOCK_WORN:
+			case BBT_BLOCK_FACTORY_BAD:
 				continue;
 			}
 			page = block <<
@@ -807,7 +834,7 @@ static int write_bbt(struct mtd_info *mtd, uint8_t *buf,
 		/* Walk through the memory table */
 		for (i = 0; i < numblocks;) {
 			uint8_t dat;
-			dat = this->bbt[bbtoffs + (i >> 2)];
+			dat = bbt_get_entry(this, (bbtoffs << 2) + i);
 			for (j = 0; j < 4; j++, i++) {
 				int sftcnt = (i << (3 - sft)) & sftmsk;
 				/* Do not store the reserved bbt blocks! */
@@ -1000,7 +1027,7 @@ static void mark_bbt_region(struct mtd_info *mtd, struct nand_bbt_descr *td)
 {
 	struct nand_chip *this = mtd->priv;
 	int i, j, chips, block, nrblocks, update;
-	uint8_t oldval, newval;
+	uint8_t oldval;
 
 	/* Do we have a bbt per chip? */
 	if (td->options & NAND_BBT_PERCHIP) {
@@ -1018,10 +1045,10 @@ static void mark_bbt_region(struct mtd_info *mtd, struct nand_bbt_descr *td)
 				continue;
 			block = td->pages[i] >> (this->bbt_erase_shift - this->page_shift);
 			block <<= 1;
-			oldval = this->bbt[(block >> 3)];
-			newval = oldval | (0x2 << (block & 0x06));
-			this->bbt[(block >> 3)] = newval;
-			if ((oldval != newval) && td->reserved_block_code)
+			oldval = bbt_get_entry(this, block >> 1);
+			bbt_mark_entry(this, block >> 1, BBT_BLOCK_RESERVED);
+			if ((oldval != BBT_BLOCK_RESERVED) &&
+					td->reserved_block_code)
 				nand_update_bbt(mtd, (loff_t)block << (this->bbt_erase_shift - 1));
 			continue;
 		}
@@ -1032,10 +1059,9 @@ static void mark_bbt_region(struct mtd_info *mtd, struct nand_bbt_descr *td)
 			block = i * nrblocks;
 		block <<= 1;
 		for (j = 0; j < td->maxblocks; j++) {
-			oldval = this->bbt[(block >> 3)];
-			newval = oldval | (0x2 << (block & 0x06));
-			this->bbt[(block >> 3)] = newval;
-			if (oldval != newval)
+			oldval = bbt_get_entry(this, block >> 1);
+			bbt_mark_entry(this, block >> 1, BBT_BLOCK_RESERVED);
+			if (oldval != BBT_BLOCK_RESERVED)
 				update = 1;
 			block += 2;
 		}
@@ -1352,18 +1378,18 @@ int nand_isbad_bbt(struct mtd_info *mtd, loff_t offs, int allowbbt)
 
 	/* Get block number * 2 */
 	block = (int)(offs >> (this->bbt_erase_shift - 1));
-	res = (this->bbt[block >> 3] >> (block & 0x06)) & 0x03;
+	res = bbt_get_entry(this, block >> 1);
 
 	pr_debug("nand_isbad_bbt(): bbt info for offs 0x%08x: "
 			"(block %d) 0x%02x\n",
 			(unsigned int)offs, block >> 1, res);
 
 	switch ((int)res) {
-	case 0x00:
+	case BBT_BLOCK_GOOD:
 		return 0;
-	case 0x01:
+	case BBT_BLOCK_WORN:
 		return 1;
-	case 0x02:
+	case BBT_BLOCK_RESERVED:
 		return allowbbt ? 0 : 1;
 	}
 	return 1;
-- 
2.19.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 3/3] mtd: nand: don't break long print messages

[Ladislav Michl]

Linux commit 2ac63d901b11 adapted for Barebox:

  ...However, never break user-visible strings such as printk
  messages, because that breaks the ability to grep for them.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
---
 drivers/mtd/nand/nand_base.c |  6 ++----
 drivers/mtd/nand/nand_bbt.c  | 23 ++++++++++-------------
 2 files changed, 12 insertions(+), 17 deletions(-)

diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index b321c5918..ccf961504 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -3565,8 +3565,7 @@ int nand_scan_tail(struct mtd_info *mtd)
 		/* Similar to NAND_ECC_HW, but a separate read_page handle */
 		if (!chip->ecc.calculate || !chip->ecc.correct ||
 		     !chip->ecc.hwctl) {
-			pr_warn("No ECC functions supplied; "
-				   "hardware ECC not possible\n");
+			pr_warn("No ECC functions supplied; hardware ECC not possible\n");
 			BUG();
 		}
 		if (!chip->ecc.read_page)
@@ -3681,8 +3680,7 @@ int nand_scan_tail(struct mtd_info *mtd)
 #endif
 #ifdef CONFIG_NAND_ECC_NONE
 	case NAND_ECC_NONE:
-		pr_warn("NAND_ECC_NONE selected by board driver. "
-			   "This is not recommended!\n");
+		pr_warn("NAND_ECC_NONE selected by board driver. This is not recommended!\n");
 		chip->ecc.read_page = nand_read_page_raw;
 		chip->ecc.write_page = nand_write_page_raw;
 		chip->ecc.read_oob = nand_read_oob_std;
diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c
index ce1d22e5c..94a2e5783 100644
--- a/drivers/mtd/nand/nand_bbt.c
+++ b/drivers/mtd/nand/nand_bbt.c
@@ -213,12 +213,12 @@ static int read_bbt(struct mtd_info *mtd, uint8_t *buf, int page, int num,
 		res = mtd_read(mtd, from, len, &retlen, buf);
 		if (res < 0) {
 			if (mtd_is_eccerr(res)) {
-				pr_info("nand_bbt: ECC error in BBT at "
-					"0x%012llx\n", from & ~mtd->writesize);
+				pr_info("nand_bbt: ECC error in BBT at 0x%012llx\n",
+					from & ~mtd->writesize);
 				return res;
 			} else if (mtd_is_bitflip(res)) {
-				pr_info("nand_bbt: corrected error in BBT at "
-					"0x%012llx\n", from & ~mtd->writesize);
+				pr_info("nand_bbt: corrected error in BBT at 0x%012llx\n",
+					from & ~mtd->writesize);
 				ret = res;
 			} else {
 				pr_info("nand_bbt: error reading BBT\n");
@@ -631,8 +631,8 @@ static int search_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr
 		if (td->pages[i] == -1)
 			pr_warn("Bad block table not found for chip %d\n", i);
 		else
-			pr_info("Bad block table found at page %d, version "
-				 "0x%02X\n", td->pages[i], td->version[i]);
+			pr_info("Bad block table found at page %d, version 0x%02X\n",
+				td->pages[i], td->version[i]);
 	}
 	return 0;
 }
@@ -778,12 +778,10 @@ static int write_bbt(struct mtd_info *mtd, uint8_t *buf,
 			res = mtd_read(mtd, to, len, &retlen, buf);
 			if (res < 0) {
 				if (retlen != len) {
-					pr_info("nand_bbt: error reading block "
-						"for writing the bad block table\n");
+					pr_info("nand_bbt: error reading block for writing the bad block table\n");
 					return res;
 				}
-				pr_warn("nand_bbt: ECC error while reading "
-					"block for writing bad block table\n");
+				pr_warn("nand_bbt: ECC error while reading block for writing bad block table\n");
 			}
 			/* Read oob data */
 			ops.ooblen = (len >> this->page_shift) * mtd->oobsize;
@@ -1380,9 +1378,8 @@ int nand_isbad_bbt(struct mtd_info *mtd, loff_t offs, int allowbbt)
 	block = (int)(offs >> (this->bbt_erase_shift - 1));
 	res = bbt_get_entry(this, block >> 1);
 
-	pr_debug("nand_isbad_bbt(): bbt info for offs 0x%08x: "
-			"(block %d) 0x%02x\n",
-			(unsigned int)offs, block >> 1, res);
+	pr_debug("nand_isbad_bbt(): bbt info for offs 0x%08x: (block %d) 0x%02x\n",
+		 (unsigned int)offs, block >> 1, res);
 
 	switch ((int)res) {
 	case BBT_BLOCK_GOOD:
-- 
2.19.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

Re: [PATCH 1/3] mtd: atmel_nand: replace printk with dev_info

[Sascha Hauer]

On Thu, Oct 25, 2018 at 01:37:54AM +0200, Ladislav Michl wrote:
> Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
> ---
>  drivers/mtd/nand/atmel_nand.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 

Applied, thanks

Sascha

> diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
> index 0b9071c9b..4bc944d24 100644
> --- a/drivers/mtd/nand/atmel_nand.c
> +++ b/drivers/mtd/nand/atmel_nand.c
> @@ -1429,14 +1429,14 @@ static int __init atmel_nand_probe(struct device_d *dev)
>  		}
>  
>  		if (gpio_get_value(host->board->det_pin)) {
> -			printk("No SmartMedia card inserted.\n");
> +			dev_info(dev, "No SmartMedia card inserted.\n");
>  			res = -ENXIO;
>  			goto err_no_card;
>  		}
>  	}
>  
>  	if (host->board->on_flash_bbt) {
> -		printk(KERN_INFO "atmel_nand: Use On Flash BBT\n");
> +		dev_info(dev, "Use On Flash BBT\n");
>  		nand_chip->bbt_options |= NAND_BBT_USE_FLASH;
>  	}
>  
> -- 
> 2.19.1
> 
> 
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox