* [PATCH 1/6] ARM: rdu2: Add switch EEPROM alias
2018-10-27 1:31 [PATCH 0/6] Switch EEPROM aliases to ZII boards Andrey Smirnov
@ 2018-10-27 1:31 ` Andrey Smirnov
2018-10-27 1:31 ` [PATCH] miitool: Fix inconsistent spacing Andrey Smirnov
` (6 subsequent siblings)
7 siblings, 0 replies; 10+ messages in thread
From: Andrey Smirnov @ 2018-10-27 1:31 UTC (permalink / raw)
To: barebox; +Cc: Andrey Smirnov
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
arch/arm/dts/imx6qdl-zii-rdu2.dtsi | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/arm/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/dts/imx6qdl-zii-rdu2.dtsi
index f63b5d2ed..3915c34df 100644
--- a/arch/arm/dts/imx6qdl-zii-rdu2.dtsi
+++ b/arch/arm/dts/imx6qdl-zii-rdu2.dtsi
@@ -52,6 +52,12 @@
aliases {
ethernet0 = &fec;
ethernet1 = &i210;
+ /*
+ * NVMEM device corresponding to EEPROM attached to
+ * the switch shared DT node with it, so we use that
+ * fact to create a desirable naming
+ */
+ switch-eeprom = &switch;
};
};
--
2.17.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 10+ messages in thread* [PATCH] miitool: Fix inconsistent spacing
2018-10-27 1:31 [PATCH 0/6] Switch EEPROM aliases to ZII boards Andrey Smirnov
2018-10-27 1:31 ` [PATCH 1/6] ARM: rdu2: Add switch EEPROM alias Andrey Smirnov
@ 2018-10-27 1:31 ` Andrey Smirnov
2018-10-27 1:34 ` Andrey Smirnov
2018-10-27 1:31 ` [PATCH 2/6] ARM: rdu1: Add switch EEPROM alias Andrey Smirnov
` (5 subsequent siblings)
7 siblings, 1 reply; 10+ messages in thread
From: Andrey Smirnov @ 2018-10-27 1:31 UTC (permalink / raw)
To: barebox; +Cc: Andrey Smirnov
Make sure that there's a space between device name and it's status
string regardless if if device is using "id" field or not.
Before:
barebox@ZII RDU2 Board:/ miitool
mdio0-phy00: mdio:no link
mdio1-phy15: 2188000.ethernet@2188000:10 Mbit, half duplex, no link
mdio1-phy16: 2188000.ethernet@2188000:10 Mbit, half duplex, no link
mdio2-phy00: 2188000.ethernet@2188000:mdio:switch@0:no link
mdio2-phy01: 2188000.ethernet@2188000:mdio:switch@0:no link
mdio2-phy02: 2188000.ethernet@2188000:mdio:switch@0:negotiated 100baseTx-FD, link ok
mdio2-phy03: 2188000.ethernet@2188000:mdio:switch@0:no link
mdio2-phy04: 2188000.ethernet@2188000:mdio:switch@0:no link
mdio3-phy01: eth1: negotiated 1000baseT-FD flow-control, link ok
After:
barebox@ZII RDU2 Board:/ miitool
mdio0-phy00: mdio: no link
mdio1-phy15: 2188000.ethernet@2188000: 10 Mbit, half duplex, no link
mdio1-phy16: 2188000.ethernet@2188000: 10 Mbit, half duplex, no link
mdio2-phy00: 2188000.ethernet@2188000:mdio:switch@0: no link
mdio2-phy01: 2188000.ethernet@2188000:mdio:switch@0: no link
mdio2-phy02: 2188000.ethernet@2188000:mdio:switch@0: no link
mdio2-phy03: 2188000.ethernet@2188000:mdio:switch@0: no link
mdio2-phy04: 2188000.ethernet@2188000:mdio:switch@0: no link
mdio3-phy01: eth1: no link
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
commands/miitool.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/commands/miitool.c b/commands/miitool.c
index dea4f853c..acf61421b 100644
--- a/commands/miitool.c
+++ b/commands/miitool.c
@@ -115,7 +115,7 @@ static int show_basic_mii(struct mii_bus *mii, struct phy_device *phydev,
for (i = 0; i < 32; i++)
mii_val[i] = mii->read(mii, phydev->addr, i);
- printf((mii->parent->id) < 0 ? "%s: %s:" : "%s: %s%d: ",
+ printf((mii->parent->id) < 0 ? "%s: %s: " : "%s: %s%d: ",
phydev->cdev.name, mii->parent->name, mii->parent->id);
--
2.17.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: [PATCH] miitool: Fix inconsistent spacing
2018-10-27 1:31 ` [PATCH] miitool: Fix inconsistent spacing Andrey Smirnov
@ 2018-10-27 1:34 ` Andrey Smirnov
0 siblings, 0 replies; 10+ messages in thread
From: Andrey Smirnov @ 2018-10-27 1:34 UTC (permalink / raw)
To: Barebox List
On Fri, Oct 26, 2018 at 6:31 PM Andrey Smirnov <andrew.smirnov@gmail.com> wrote:
>
> Make sure that there's a space between device name and it's status
> string regardless if if device is using "id" field or not.
>
> Before:
>
> barebox@ZII RDU2 Board:/ miitool
> mdio0-phy00: mdio:no link
> mdio1-phy15: 2188000.ethernet@2188000:10 Mbit, half duplex, no link
> mdio1-phy16: 2188000.ethernet@2188000:10 Mbit, half duplex, no link
> mdio2-phy00: 2188000.ethernet@2188000:mdio:switch@0:no link
> mdio2-phy01: 2188000.ethernet@2188000:mdio:switch@0:no link
> mdio2-phy02: 2188000.ethernet@2188000:mdio:switch@0:negotiated 100baseTx-FD, link ok
> mdio2-phy03: 2188000.ethernet@2188000:mdio:switch@0:no link
> mdio2-phy04: 2188000.ethernet@2188000:mdio:switch@0:no link
> mdio3-phy01: eth1: negotiated 1000baseT-FD flow-control, link ok
>
> After:
>
> barebox@ZII RDU2 Board:/ miitool
> mdio0-phy00: mdio: no link
> mdio1-phy15: 2188000.ethernet@2188000: 10 Mbit, half duplex, no link
> mdio1-phy16: 2188000.ethernet@2188000: 10 Mbit, half duplex, no link
> mdio2-phy00: 2188000.ethernet@2188000:mdio:switch@0: no link
> mdio2-phy01: 2188000.ethernet@2188000:mdio:switch@0: no link
> mdio2-phy02: 2188000.ethernet@2188000:mdio:switch@0: no link
> mdio2-phy03: 2188000.ethernet@2188000:mdio:switch@0: no link
> mdio2-phy04: 2188000.ethernet@2188000:mdio:switch@0: no link
> mdio3-phy01: eth1: no link
>
> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Ugh, didn't mean to send this patch out. Sorry for the noise.
Thanks,
Andrey Smirnov
> ---
> commands/miitool.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/commands/miitool.c b/commands/miitool.c
> index dea4f853c..acf61421b 100644
> --- a/commands/miitool.c
> +++ b/commands/miitool.c
> @@ -115,7 +115,7 @@ static int show_basic_mii(struct mii_bus *mii, struct phy_device *phydev,
> for (i = 0; i < 32; i++)
> mii_val[i] = mii->read(mii, phydev->addr, i);
>
> - printf((mii->parent->id) < 0 ? "%s: %s:" : "%s: %s%d: ",
> + printf((mii->parent->id) < 0 ? "%s: %s: " : "%s: %s%d: ",
> phydev->cdev.name, mii->parent->name, mii->parent->id);
>
>
> --
> 2.17.1
>
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH 2/6] ARM: rdu1: Add switch EEPROM alias
2018-10-27 1:31 [PATCH 0/6] Switch EEPROM aliases to ZII boards Andrey Smirnov
2018-10-27 1:31 ` [PATCH 1/6] ARM: rdu2: Add switch EEPROM alias Andrey Smirnov
2018-10-27 1:31 ` [PATCH] miitool: Fix inconsistent spacing Andrey Smirnov
@ 2018-10-27 1:31 ` Andrey Smirnov
2018-10-27 1:31 ` [PATCH 3/6] ARM: vf610-zii-dev-rev-c: " Andrey Smirnov
` (4 subsequent siblings)
7 siblings, 0 replies; 10+ messages in thread
From: Andrey Smirnov @ 2018-10-27 1:31 UTC (permalink / raw)
To: barebox; +Cc: Andrey Smirnov
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
arch/arm/dts/imx51-zii-rdu1.dts | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm/dts/imx51-zii-rdu1.dts b/arch/arm/dts/imx51-zii-rdu1.dts
index 93bb344f5..c649db45c 100644
--- a/arch/arm/dts/imx51-zii-rdu1.dts
+++ b/arch/arm/dts/imx51-zii-rdu1.dts
@@ -24,6 +24,15 @@
device-path = &spinor, "partname:barebox-environment";
};
};
+
+ aliases {
+ /*
+ * NVMEM device corresponding to EEPROM attached to
+ * the switch shared DT node with it, so we use that
+ * fact to create a desirable naming
+ */
+ switch-eeprom = &switch;
+ };
};
&ecspi1 {
@@ -51,6 +60,10 @@
};
};
+&mdio_gpio {
+ switch: switch@0 {};
+};
+
&uart3 {
rave-sp {
watchdog {
--
2.17.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 10+ messages in thread* [PATCH 3/6] ARM: vf610-zii-dev-rev-c: Add switch EEPROM alias
2018-10-27 1:31 [PATCH 0/6] Switch EEPROM aliases to ZII boards Andrey Smirnov
` (2 preceding siblings ...)
2018-10-27 1:31 ` [PATCH 2/6] ARM: rdu1: Add switch EEPROM alias Andrey Smirnov
@ 2018-10-27 1:31 ` Andrey Smirnov
2018-10-27 1:31 ` [PATCH 4/6] ARM: vf610-zii-cfu1: " Andrey Smirnov
` (3 subsequent siblings)
7 siblings, 0 replies; 10+ messages in thread
From: Andrey Smirnov @ 2018-10-27 1:31 UTC (permalink / raw)
To: barebox; +Cc: Andrey Smirnov
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
arch/arm/dts/vf610-zii-dev-rev-c.dts | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm/dts/vf610-zii-dev-rev-c.dts b/arch/arm/dts/vf610-zii-dev-rev-c.dts
index 797b31bef..c6341a027 100644
--- a/arch/arm/dts/vf610-zii-dev-rev-c.dts
+++ b/arch/arm/dts/vf610-zii-dev-rev-c.dts
@@ -46,6 +46,18 @@
#include "vf610-zii-dev.dtsi"
+/ {
+ aliases {
+ /*
+ * NVMEM device corresponding to EEPROM attached to
+ * the switch shared DT node with it, so we use that
+ * fact to create a desirable naming
+ */
+ switch0-eeprom = &switch0;
+ switch1-eeprom = &switch1;
+ };
+};
+
&dspi0 {
m25p128@0 {
partition@0 {
--
2.17.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 10+ messages in thread* [PATCH 4/6] ARM: vf610-zii-cfu1: Add switch EEPROM alias
2018-10-27 1:31 [PATCH 0/6] Switch EEPROM aliases to ZII boards Andrey Smirnov
` (3 preceding siblings ...)
2018-10-27 1:31 ` [PATCH 3/6] ARM: vf610-zii-dev-rev-c: " Andrey Smirnov
@ 2018-10-27 1:31 ` Andrey Smirnov
2018-10-27 1:31 ` [PATCH 5/6] ARM: vf610-zii-ssmb-spu3: " Andrey Smirnov
` (2 subsequent siblings)
7 siblings, 0 replies; 10+ messages in thread
From: Andrey Smirnov @ 2018-10-27 1:31 UTC (permalink / raw)
To: barebox; +Cc: Andrey Smirnov
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
arch/arm/dts/vf610-zii-cfu1.dts | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/arm/dts/vf610-zii-cfu1.dts b/arch/arm/dts/vf610-zii-cfu1.dts
index 80d3f54f7..149333596 100644
--- a/arch/arm/dts/vf610-zii-cfu1.dts
+++ b/arch/arm/dts/vf610-zii-cfu1.dts
@@ -8,3 +8,14 @@
#include "vf610-zii-dev.dtsi"
+/ {
+ aliases {
+ /*
+ * NVMEM device corresponding to EEPROM attached to
+ * the switch shared DT node with it, so we use that
+ * fact to create a desirable naming
+ */
+ switch-eeprom = &switch0;
+ };
+};
+
--
2.17.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 10+ messages in thread* [PATCH 5/6] ARM: vf610-zii-ssmb-spu3: Add switch EEPROM alias
2018-10-27 1:31 [PATCH 0/6] Switch EEPROM aliases to ZII boards Andrey Smirnov
` (4 preceding siblings ...)
2018-10-27 1:31 ` [PATCH 4/6] ARM: vf610-zii-cfu1: " Andrey Smirnov
@ 2018-10-27 1:31 ` Andrey Smirnov
2018-10-27 1:31 ` [PATCH 6/6] ARM: imx7d-zii-rpu2: " Andrey Smirnov
2018-10-29 7:50 ` [PATCH 0/6] Switch EEPROM aliases to ZII boards Sascha Hauer
7 siblings, 0 replies; 10+ messages in thread
From: Andrey Smirnov @ 2018-10-27 1:31 UTC (permalink / raw)
To: barebox; +Cc: Andrey Smirnov
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
arch/arm/dts/vf610-zii-ssmb-spu3.dts | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/arm/dts/vf610-zii-ssmb-spu3.dts b/arch/arm/dts/vf610-zii-ssmb-spu3.dts
index e030109ce..5b2460caf 100644
--- a/arch/arm/dts/vf610-zii-ssmb-spu3.dts
+++ b/arch/arm/dts/vf610-zii-ssmb-spu3.dts
@@ -3,3 +3,14 @@
#include <arm/vf610-zii-ssmb-spu3.dts>
#include "vf610-zii-dev.dtsi"
+
+/ {
+ aliases {
+ /*
+ * NVMEM device corresponding to EEPROM attached to
+ * the switch shared DT node with it, so we use that
+ * fact to create a desirable naming
+ */
+ switch-eeprom = &switch0;
+ };
+};
--
2.17.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 10+ messages in thread* [PATCH 6/6] ARM: imx7d-zii-rpu2: Add switch EEPROM alias
2018-10-27 1:31 [PATCH 0/6] Switch EEPROM aliases to ZII boards Andrey Smirnov
` (5 preceding siblings ...)
2018-10-27 1:31 ` [PATCH 5/6] ARM: vf610-zii-ssmb-spu3: " Andrey Smirnov
@ 2018-10-27 1:31 ` Andrey Smirnov
2018-10-29 7:50 ` [PATCH 0/6] Switch EEPROM aliases to ZII boards Sascha Hauer
7 siblings, 0 replies; 10+ messages in thread
From: Andrey Smirnov @ 2018-10-27 1:31 UTC (permalink / raw)
To: barebox; +Cc: Andrey Smirnov
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
arch/arm/dts/imx7d-zii-rpu2.dts | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm/dts/imx7d-zii-rpu2.dts b/arch/arm/dts/imx7d-zii-rpu2.dts
index 6fba73f43..24a6d40f7 100644
--- a/arch/arm/dts/imx7d-zii-rpu2.dts
+++ b/arch/arm/dts/imx7d-zii-rpu2.dts
@@ -19,6 +19,15 @@
stdout-path = &uart2;
};
+ aliases {
+ /*
+ * NVMEM device corresponding to EEPROM attached to
+ * the switch shared DT node with it, so we use that
+ * fact to create a desirable naming
+ */
+ switch-eeprom = &switch0;
+ };
+
gpio-leds {
compatible = "gpio-leds";
pinctrl-0 = <&pinctrl_leds_debug>;
--
2.17.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: [PATCH 0/6] Switch EEPROM aliases to ZII boards
2018-10-27 1:31 [PATCH 0/6] Switch EEPROM aliases to ZII boards Andrey Smirnov
` (6 preceding siblings ...)
2018-10-27 1:31 ` [PATCH 6/6] ARM: imx7d-zii-rpu2: " Andrey Smirnov
@ 2018-10-29 7:50 ` Sascha Hauer
7 siblings, 0 replies; 10+ messages in thread
From: Sascha Hauer @ 2018-10-29 7:50 UTC (permalink / raw)
To: Andrey Smirnov; +Cc: barebox
On Fri, Oct 26, 2018 at 06:31:20PM -0700, Andrey Smirnov wrote:
> Everyone:
>
> With Marvell driver patches in 'next' a number of ZII boards now
> expose a switch EEPROM device in devfs. By default those NVMEM devices
> are given rather unwieldy long names, so this series introduces
> appropriate aliases to shorten those to either "switch-eeprom" or
> "switchN-eeprom" for cases of just one or multiple EEPROMs
> correspondingly.
>
> Feedback is wellcome!
>
> Thanks,
> Andrey Smirnov
Applied, thanks
Sascha
>
> Andrey Smirnov (6):
> ARM: rdu2: Add switch EEPROM alias
> ARM: rdu1: Add switch EEPROM alias
> ARM: vf610-zii-dev-rev-c: Add switch EEPROM alias
> ARM: vf610-zii-cfu1: Add switch EEPROM alias
> ARM: vf610-zii-ssmb-spu3: Add switch EEPROM alias
> ARM: imx7d-zii-rpu2: Add switch EEPROM alias
>
> arch/arm/dts/imx51-zii-rdu1.dts | 13 +++++++++++++
> arch/arm/dts/imx6qdl-zii-rdu2.dtsi | 6 ++++++
> arch/arm/dts/imx7d-zii-rpu2.dts | 9 +++++++++
> arch/arm/dts/vf610-zii-cfu1.dts | 11 +++++++++++
> arch/arm/dts/vf610-zii-dev-rev-c.dts | 12 ++++++++++++
> arch/arm/dts/vf610-zii-ssmb-spu3.dts | 11 +++++++++++
> 6 files changed, 62 insertions(+)
>
> --
> 2.17.1
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 10+ messages in thread