From: Ladislav Michl <ladis@linux-mips.org>
To: barebox@lists.infradead.org
Subject: [PATCH 00/16] NAND update (1st step)
Date: Sun, 28 Oct 2018 22:19:47 +0100 [thread overview]
Message-ID: <20181028211947.GA14788@lenoch> (raw)
The ultimate goal we are still quite far away is to update MTD subsystem
to something more recent. As it is rather hard to accomplish by simply
importing core files from linux-4.19 as there are many NAND drivers
not even present in mainline kernel in current (barebox) form, let's
choose incremental updating.
This patchset is rather selfish (and I'm sorry for that); its sole
purpose is being able to use Toshiba NAND (needing 8bit ECC) on
AT91SAM9G20 based board. This is also the only board I was able to
do runtime testing. To do this "mtd: atmel_nand: Add per board ECC
setup" patch is introduced. This shall be considered temporary
solution. As MTD core will be updated, we can import rewritten
Atmel NAND driver.
There more in queue, most notably mtd_ooblayout_ops conversion,
but let's focus on this serie first :)
Special thanks goes to Boris Brezillon for guiding me though pitfalls
of NAND devices while debugging Toshiba NAND support in Barebox.
Comments (or even help with fixes) very welcome, this will be likely
a bit painfull update.
Ladislav Michl (16):
mtd: nand: refactor chip->block_markbad interface
mtd: nand: remove multiplied-by-2 block logic
mtd: nand: hide in-memory BBT implementation details
mtd: nand: remove NAND_BBT_SCANEMPTY
mtd: nand: Request strength instead of bytes for soft BCH
mtd: atmel_nand: Add per board ECC setup
mtd: nand: simplify nand_bch_init() usage
mtd: nand_bbt: kill NAND_BBT_SCANALLPAGES
mtd: nand_bbt: handle error case for nand_create_badblock_pattern()
mtd: nand_bbt: make nand_scan_bbt() static
mtd: nand_bbt: unify/fix error handling in nand_scan_bbt()
mtd: nand_bbt: Move BBT block selection logic out of write_bbt()
mtd: nand_bbt: scan for next free bbt block if writing bbt fails
mtd: nand: Kill the chip->scan_bbt() hook
mtd: nand: Kill cellinfo
mtd: nand: detect OOB size for Toshiba 24nm raw SLC
arch/arm/mach-at91/include/mach/board.h | 2 +
drivers/mtd/nand/atmel_nand.c | 3 +
drivers/mtd/nand/nand_base.c | 274 +++++++++--------
drivers/mtd/nand/nand_bbt.c | 385 ++++++++++++++----------
drivers/mtd/nand/nand_bch.c | 27 +-
drivers/mtd/nand/nand_imx_bbm.c | 2 +-
drivers/mtd/nand/nand_mxs.c | 27 +-
drivers/mtd/nand/nand_omap_gpmc.c | 1 -
include/linux/mtd/bbm.h | 4 -
include/linux/mtd/nand.h | 13 +-
include/linux/mtd/nand_bch.h | 8 +-
11 files changed, 415 insertions(+), 331 deletions(-)
--
2.19.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next reply other threads:[~2018-10-28 21:20 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-28 21:19 Ladislav Michl [this message]
2018-10-28 21:21 ` [PATCH 01/16] mtd: nand: refactor chip->block_markbad interface Ladislav Michl
2018-10-28 21:21 ` [PATCH 02/16] mtd: nand: remove multiplied-by-2 block logic Ladislav Michl
2018-10-28 21:22 ` [PATCH 03/16] mtd: nand: hide in-memory BBT implementation details Ladislav Michl
2018-10-29 10:07 ` Ladislav Michl
2018-10-29 11:43 ` Ladislav Michl
2018-10-30 9:07 ` Sascha Hauer
2018-10-28 21:22 ` [PATCH 04/16] mtd: nand: remove NAND_BBT_SCANEMPTY Ladislav Michl
2018-10-28 21:22 ` [PATCH 05/16] mtd: nand: Request strength instead of bytes for soft BCH Ladislav Michl
2018-10-28 21:23 ` [PATCH 06/16] mtd: atmel_nand: Add per board ECC setup Ladislav Michl
2018-10-28 21:23 ` [PATCH 07/16] mtd: nand: simplify nand_bch_init() usage Ladislav Michl
2018-10-28 21:24 ` [PATCH 08/16] mtd: nand_bbt: kill NAND_BBT_SCANALLPAGES Ladislav Michl
2018-10-28 21:24 ` [PATCH 09/16] mtd: nand_bbt: handle error case for nand_create_badblock_pattern() Ladislav Michl
2018-10-28 21:25 ` [PATCH 10/16] mtd: nand_bbt: make nand_scan_bbt() static Ladislav Michl
2018-10-28 21:25 ` [PATCH 11/16] mtd: nand_bbt: unify/fix error handling in nand_scan_bbt() Ladislav Michl
2018-10-28 21:25 ` [PATCH 12/16] mtd: nand_bbt: Move BBT block selection logic out of write_bbt() Ladislav Michl
2018-10-28 21:26 ` [PATCH 13/16] mtd: nand_bbt: scan for next free bbt block if writing bbt fails Ladislav Michl
2018-10-28 21:26 ` [PATCH 14/16] mtd: nand: Kill the chip->scan_bbt() hook Ladislav Michl
2019-01-21 8:32 ` Sascha Hauer
2018-10-28 21:27 ` [PATCH 15/16] mtd: nand: Kill cellinfo Ladislav Michl
2018-10-28 21:27 ` [PATCH 16/16] mtd: nand: detect OOB size for Toshiba 24nm raw SLC Ladislav Michl
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181028211947.GA14788@lenoch \
--to=ladis@linux-mips.org \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox