From: Ladislav Michl <ladis@linux-mips.org>
To: barebox@lists.infradead.org
Subject: [PATCH 01/16] mtd: nand: refactor chip->block_markbad interface
Date: Sun, 28 Oct 2018 22:21:20 +0100 [thread overview]
Message-ID: <20181028212120.GB14788@lenoch> (raw)
In-Reply-To: <20181028211947.GA14788@lenoch>
Linux commit 5a0edb251ae9 adapted for Barebox:
The chip->block_markbad pointer should really only be responsible for
writing a bad block marker for new bad blocks. It should not take care
of BBT-related functionality, nor should it handle bookkeeping of bad
block stats.
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
---
drivers/mtd/nand/nand_base.c | 87 +++++++++++++++++++++---------------
1 file changed, 52 insertions(+), 35 deletions(-)
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index ccf961504..2025d176e 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -326,13 +326,58 @@ static int nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip)
}
/**
- * nand_default_block_markbad - [DEFAULT] mark a block bad
+ * nand_default_block_markbad - [DEFAULT] mark a block bad via bad block marker
* @mtd: MTD device structure
* @ofs: offset from device start
*
* This is the default implementation, which can be overridden by a hardware
- * specific driver. We try operations in the following order, according to our
- * bbt_options (NAND_BBT_NO_OOB_BBM and NAND_BBT_USE_FLASH):
+ * specific driver. It provides the details for writing a bad block marker to a
+ * block.
+ */
+static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct mtd_oob_ops ops;
+ uint8_t buf[2] = { 0, 0 };
+ int ret = 0, res, i = 0;
+
+ ops.datbuf = NULL;
+ ops.oobbuf = buf;
+ ops.ooboffs = chip->badblockpos;
+ if (chip->options & NAND_BUSWIDTH_16) {
+ ops.ooboffs &= ~0x01;
+ ops.len = ops.ooblen = 2;
+ } else {
+ ops.len = ops.ooblen = 1;
+ }
+ ops.mode = MTD_OPS_PLACE_OOB;
+
+ /* Write to first/last page(s) if necessary */
+ if (chip->bbt_options & NAND_BBT_SCANLASTPAGE)
+ ofs += mtd->erasesize - mtd->writesize;
+ do {
+ res = nand_do_write_oob(mtd, ofs, &ops);
+ if (!ret)
+ ret = res;
+
+ i++;
+ ofs += mtd->writesize;
+ } while ((chip->bbt_options & NAND_BBT_SCAN2NDPAGE) && i < 2);
+
+ return ret;
+}
+
+/**
+ * nand_block_markbad_lowlevel - mark a block bad
+ * @mtd: MTD device structure
+ * @ofs: offset from device start
+ *
+ * This function performs the generic NAND bad block marking steps (i.e., bad
+ * block table(s) and/or marker(s)). We only allow the hardware driver to
+ * specify how to write bad block markers to OOB (chip->block_markbad).
+ *
+ * We try operations in the following order, according to our bbt_options
+ * (NAND_BBT_NO_OOB_BBM and NAND_BBT_USE_FLASH):
* (1) erase the affected block, to allow OOB marker to be written cleanly
* (2) update in-memory BBT
* (3) write bad block marker to OOB area of affected block
@@ -340,11 +385,10 @@ static int nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip)
* Note that we retain the first error encountered in (3) or (4), finish the
* procedures, and dump the error in the end.
*/
-static __maybe_unused int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
+static int nand_block_markbad_lowlevel(struct mtd_info *mtd, loff_t ofs)
{
struct nand_chip *chip = mtd->priv;
- uint8_t buf[2] = { 0, 0 };
- int block, res, ret = 0, i = 0;
+ int block, res, ret = 0;
int write_oob = !(chip->bbt_options & NAND_BBT_NO_OOB_BBM);
if (write_oob) {
@@ -366,34 +410,8 @@ static __maybe_unused int nand_default_block_markbad(struct mtd_info *mtd, loff
/* Write bad block marker to OOB */
if (write_oob) {
- struct mtd_oob_ops ops;
- loff_t wr_ofs = ofs;
-
nand_get_device(mtd, FL_WRITING);
-
- ops.datbuf = NULL;
- ops.oobbuf = buf;
- ops.ooboffs = chip->badblockpos;
- if (chip->options & NAND_BUSWIDTH_16) {
- ops.ooboffs &= ~0x01;
- ops.len = ops.ooblen = 2;
- } else {
- ops.len = ops.ooblen = 1;
- }
- ops.mode = MTD_OPS_PLACE_OOB;
-
- /* Write to first/last page(s) if necessary */
- if (chip->bbt_options & NAND_BBT_SCANLASTPAGE)
- wr_ofs += mtd->erasesize - mtd->writesize;
- do {
- res = nand_do_write_oob(mtd, wr_ofs, &ops);
- if (!ret)
- ret = res;
-
- i++;
- wr_ofs += mtd->writesize;
- } while ((chip->bbt_options & NAND_BBT_SCAN2NDPAGE) && i < 2);
-
+ ret = chip->block_markbad(mtd, ofs);
nand_release_device(mtd);
}
@@ -2786,7 +2804,6 @@ static int nand_block_isbad(struct mtd_info *mtd, loff_t offs)
*/
static int nand_block_markbad(struct mtd_info *mtd, loff_t ofs)
{
- struct nand_chip *chip = mtd->priv;
int ret;
if (!IS_ENABLED(CONFIG_MTD_WRITE))
@@ -2800,7 +2817,7 @@ static int nand_block_markbad(struct mtd_info *mtd, loff_t ofs)
return ret;
}
- return chip->block_markbad(mtd, ofs);
+ return nand_block_markbad_lowlevel(mtd, ofs);
}
/**
--
2.19.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2018-10-28 21:21 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-28 21:19 [PATCH 00/16] NAND update (1st step) Ladislav Michl
2018-10-28 21:21 ` Ladislav Michl [this message]
2018-10-28 21:21 ` [PATCH 02/16] mtd: nand: remove multiplied-by-2 block logic Ladislav Michl
2018-10-28 21:22 ` [PATCH 03/16] mtd: nand: hide in-memory BBT implementation details Ladislav Michl
2018-10-29 10:07 ` Ladislav Michl
2018-10-29 11:43 ` Ladislav Michl
2018-10-30 9:07 ` Sascha Hauer
2018-10-28 21:22 ` [PATCH 04/16] mtd: nand: remove NAND_BBT_SCANEMPTY Ladislav Michl
2018-10-28 21:22 ` [PATCH 05/16] mtd: nand: Request strength instead of bytes for soft BCH Ladislav Michl
2018-10-28 21:23 ` [PATCH 06/16] mtd: atmel_nand: Add per board ECC setup Ladislav Michl
2018-10-28 21:23 ` [PATCH 07/16] mtd: nand: simplify nand_bch_init() usage Ladislav Michl
2018-10-28 21:24 ` [PATCH 08/16] mtd: nand_bbt: kill NAND_BBT_SCANALLPAGES Ladislav Michl
2018-10-28 21:24 ` [PATCH 09/16] mtd: nand_bbt: handle error case for nand_create_badblock_pattern() Ladislav Michl
2018-10-28 21:25 ` [PATCH 10/16] mtd: nand_bbt: make nand_scan_bbt() static Ladislav Michl
2018-10-28 21:25 ` [PATCH 11/16] mtd: nand_bbt: unify/fix error handling in nand_scan_bbt() Ladislav Michl
2018-10-28 21:25 ` [PATCH 12/16] mtd: nand_bbt: Move BBT block selection logic out of write_bbt() Ladislav Michl
2018-10-28 21:26 ` [PATCH 13/16] mtd: nand_bbt: scan for next free bbt block if writing bbt fails Ladislav Michl
2018-10-28 21:26 ` [PATCH 14/16] mtd: nand: Kill the chip->scan_bbt() hook Ladislav Michl
2019-01-21 8:32 ` Sascha Hauer
2018-10-28 21:27 ` [PATCH 15/16] mtd: nand: Kill cellinfo Ladislav Michl
2018-10-28 21:27 ` [PATCH 16/16] mtd: nand: detect OOB size for Toshiba 24nm raw SLC Ladislav Michl
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181028212120.GB14788@lenoch \
--to=ladis@linux-mips.org \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox